Search results

The purpose of this paper is to propose and evaluate the method for grasping a defined set of objects in an unstructured environment. To this end, the authors propose the method of integrating convolutional neural network (CNN)-based object detection and the category-free grasping method. The considered scenario is related to mobile manipulating platforms that move freely between workstations and manipulate defined objects. In this application, the robot is not positioned with respect to the table and manipulated objects. The robot detects objects in the environment and uses grasping methods to determine the reference pose of the gripper.

The authors implemented the whole pipeline which includes object detection, grasp planning and motion execution on the real robot. The selected grasping method uses raw depth images to find the configuration of the gripper. The authors compared the proposed approach with a representative grasping method that uses a 3D point cloud as an input to determine the grasp for the robotic arm equipped with a two-fingered gripper. To measure and compare the efficiency of these methods, the authors measured the success rate in various scenarios. Additionally, they evaluated the accuracy of object detection and pose estimation modules.

The performed experiments revealed that the CNN-based object detection and the category-free grasping methods can be integrated to obtain the system which allows grasping defined objects in the unstructured environment. The authors also identified the specific limitations of neural-based and point cloud-based methods. They show how the determined properties influence the performance of the whole system.

The authors identified the limitations of the proposed methods and the improvements are envisioned as part of future research.

The evaluation of the grasping and object detection methods on the mobile manipulating robot may be useful for all researchers working on the autonomy of similar platforms in various applications.

The proposed method increases the autonomy of robots in applications in the small industry which is related to repetitive tasks in a noisy and potentially risky environment. This allows reducing the human workload in these types of environments.

The main contribution of this research is the integration of the state-of-the-art methods for grasping objects with object detection methods and evaluation of the whole system on the industrial robot. Moreover, the properties of each subsystem are identified and measured.

In recent years, owing to the rapidly increasing labor costs, the demand for robots in daily services and industrial operations has been increased significantly. For further applications and human–robot interaction in an unstructured open environment, fast and accurate tracking and strong disturbance rejection ability are required. However, utilizing a conventional controller can make it difficult for the robot to meet these demands, and when a robot is required to perform at a high-speed and large range of motion, conventional controllers may not perform effectively or even lead to the instability.

The main idea is to develop the control law by combining the SMC feedback with the ADRC control architecture to improve the robustness and control quality of a conventional SMC controller. The problem is formulated and solved in the framework of ADRC. For better estimation and control performance, a generalized proportional integral observer (GPIO) technique is employed to estimate and compensate for unmodeled dynamics and other unknown time-varying disturbances. And benefiting from the usage of GPIO, a new SMC law can be designed by synthesizing the estimation and its history.

The employed methodology introduced a significant improvement in handling the uncertainties of the system parameters without compromising the nominal system control quality and intuitiveness of the conventional ADRC design. First, the proposed method combines the advantages of the ADRC and SMC method, which achieved the best tracking performance among these controllers. Second, the proposed controller is sufficiently robust to various disturbances and results in smaller tracking errors. Third, the proposed control method is insensitive to control parameters which indicates a good application potential.

High-performance robot tracking control is the basis for further robot applications in open environments and human–robot interfaces, which require high tracking accuracy and strong disturbance rejection. However, both the varied dynamics of the system and rapidly changing nonlinear coupling characteristic significantly increase the control difficulty. The proposed method gives a new replacement of PID controller in robot systems, which does not require an accurate dynamic system model, is insensitive to control parameters and can perform promisingly for response rapidity and steady-state accuracy, as well as in the presence of strong unknown disturbances.

The purpose of this paper is to propose a robotic system for percutaneous surgery. The key component in the system, a robotic arm that can manipulate a puncture needle is presented. The mechanical design, the motion control and the force control method of the robotic arm are discussed in the paper.

The arm with an arc mechanism placed on a 3D Cartesian stage is developed as a puncture needle manipulator to locate the position of the needle tip, tune the needle’s posture and actuate the puncture motion under the visual guidance of two orthogonal X-ray images of a patient by a surgeon. A focusing method by using two laser spots is proposed to automatically move the needle tip to a surgery entry point on the skin. A dynamics model is developed to control the position of the needle mechanism and an explicit force control strategy is utilized to perform the needle insertion.

With the surgical system, a surgeon can easily perform puncture operation by taking two orthogonal real-time X-ray images as a visual feedback and accurately navigating the needle insertion. The laser-guided focusing method is efficient in placement of the needle tip. The explicit force control strategy is proved to be effective for holding constant and stable puncture force in experiments.

The robotic arm has an advantage in easy redirection of the needle because the rotation and the translation are decoupled in the mechanism. By adopting simple laser pens and a well-developed kinematics model, the system can handle the entry point, locating task automatically. The focusing method and the force control method proposed in the paper are useful for the present system and could be intuitive for similar surgical robots.

The purpose of this paper is to propose a concept of cloud auction robot (CAR) and its execution platform for transforming perishable food supply chain management. A new paradigm of goods-to-person auction execution model is proposed based on CARs. This paradigm can shift the management of traditional manual working to automated execution with great space and time saving. A scalable CAR-enabled execution system (CARES) is presented to manage logistics workflows, tasks and behavior of CAR-Agents in handling the real-time events and associated data.

An Internet of Things enabled auction environment is designed. The robot is used to pick up and deliver the auction products and commends are given to the robot in real-time. CARES architecture is proposed while integrating three core services from auction workflow management, auction task management, to auction execution control. A system prototype was developed to show its execution through physical emulations and experiments.

The CARES could well schedule the tasks for each robot to minimize their waiting time. The total execution time is reduced by 33 percent on average. Space utilization for each auction studio is improved by about 50 percent per day.

The CAR-enabled execution model and system is simulated and verified in a ubiquitous auction environment so as to upgrade the perishable food supply chain management into a new level which is automated and real-time. The proposed system is flexible to cope with different auction scenarios, such as different auction mechanisms and processes, with high reconfigurability and scalability.

Vision, audition, olfactory, tactile and taste are five important senses that human uses to interact with the real world. As facing more and more complex environments, a sensing system is essential for intelligent robots with various types of sensors. To mimic human-like abilities, sensors similar to human perception capabilities are indispensable. However, most research only concentrated on analyzing literature on single-modal sensors and their robotics application.

This study presents a systematic review of five bioinspired senses, especially considering a brief introduction of multimodal sensing applications and predicting current trends and future directions of this field, which may have continuous enlightenments.

This review shows that bioinspired sensors can enable robots to better understand the environment, and multiple sensor combinations can support the robot’s ability to behave intelligently.

The review starts with a brief survey of the biological sensing mechanisms of the five senses, which are followed by their bioinspired electronic counterparts. Their applications in the robots are then reviewed as another emphasis, covering the main application scopes of localization and navigation, objection identification, dexterous manipulation, compliant interaction and so on. Finally, the trends, difficulties and challenges of this research were discussed to help guide future research on intelligent robot sensors.

This study aims to propose an offline exploratory method that consists of two stages: first, the authors focus on completing the kinematics model of the system by analyzing the Jacobians in the vicinity of the starting point and deducing a virtual input to effectively navigate the system along the non-holonomic constraint. Second, the authors explore the sensorimotor space in a predetermined pattern and obtain an approximate mapping from sensor space to chained form that facilitates controllability.

In this paper, the authors tackle the controller acquisition problem of unknown sensorimotor model in non-holonomic driftless systems. This feature is interesting to simplify and speed up the process of setting up industrial mobile robots with feedback controllers.

The authors validate the approach for the test case of the unicycle by controlling the system with time-state control policy. The authors present simulated and experimental results that show the effectiveness of the proposed method, and a comparison with the proximal policy optimization algorithm.

This research indicates clearly that feedback control of non-holonomic systems with uncertain kinematics and unknown sensor configuration is possible.

An accurate detection of overhead ground wire under open surroundings with varying illumination is the premise of reliable line grasping with the off-line arm when the inspection robot cross obstacle automatically. This paper aims to propose an improved approach which is called adaptive homomorphic filter and supervised learning (AHSL) for overhead ground wire detection.

First, to decrease the influence of the varying illumination caused by the open work environment of the inspection robot, the adaptive homomorphic filter is introduced to compensation the changing illumination. Second, to represent ground wire more effectively and to extract more powerful and discriminative information for building a binary classifier, the global and local features fusion method followed by supervised learning method support vector machine is proposed.

Experiment results on two self-built testing data sets A and B which contain relative older ground wires and relative newer ground wire and on the field ground wires show that the use of the adaptive homomorphic filter and global and local feature fusion method can improve the detection accuracy of the ground wire effectively. The result of the proposed method lays a solid foundation for inspection robot grasping the ground wire by visual servo.

This method AHSL has achieved 80.8 per cent detection accuracy on data set A which contains relative older ground wires and 85.3 per cent detection accuracy on data set B which contains relative newer ground wires, and the field experiment shows that the robot can detect the ground wire accurately. The performance achieved by proposed method is the state of the art under open environment with varying illumination.

This paper reviews literature on the application of intelligent systems in the libraries with a special issue on the ES/AI and Robot. Also, it introduces the potential of libraries to use intelligent systems, especially ES/AI and robots.

Descriptive and content review methods are applied, and the researchers critically reviewed the articles related to library ESs and robots from Web of Science as a general database and Emerald as a specific database in library and information science from 2007–2017. Four scopes considered to classify the articles as technology, service, user and resource. It is found that published researches on the intelligent systems have contributed to many librarian purposes like library technical services like the organization of information resources, storage and retrieval of information resources, library public services as reference services, information desk and other purposes.

A review of the previous studies shows that ESs are a useable intelligent system in library and information science that mimic librarian expert’s behaviors to support decision making and management. Also, it is shown that the current information systems have a high potential to be improved by integration with AI technologies. In this researches, librarian robots mostly designed for detection and replacing books on the shelf. Improving the technology of gripping, localizing and human-robot interaction are the main concern in recent librarian robot research. Our conclusion is that we need to develop research in the area of smart resources.

This study has a new approach to the literature review in this area. We compared the published papers in the field of ES/AI and robot and library from two databases, general and specific.

Aircraft structures are mainly connected by riveting joints, whose quality and mechanical performance are directly determined by vertical accuracy of riveting holes. This paper proposed a combined vertical accuracy compensation method for drilling and riveting of aircraft panels with great variable curvatures.

The vertical accuracy compensation method combines online and offline compensation categories in a robot riveting and drilling system. The former category based on laser ranging is aimed to correct the vertical error between actual and theoretical riveting positions, and the latter based on model curvature is used to correct the vertical error caused by the approximate plane fitting in variable-curvature panels.

The vertical accuracy compensation method is applied in an automatic robot drilling and riveting system. The result reveals that the vertical accuracy error of drilling and riveting is within 0.4°, which meets the requirements of the vertical accuracy in aircraft assembly.

The proposed method is suitable for improving the vertical accuracy of drilling and riveting on panels or skins of aerospace products with great variable curvatures without introducing extra measuring sensors.

This paper is a response to the doctrine that capital is incompatible with public ownership. The fundamental characteristics of modern productivity determine the co-existence of the market economy and capital relations.

Socialism can neither bypass the market economy nor “go beyond capital”; capital appears in two historical forms, including the private capital and the public capital. Public capital is the inevitable outcome of the inherent contradictions of public ownership in a socialist market economy.

It represents an economic relationship that compels individual labourers to provide surplus labour for the society. The combination of the strong accumulation function of public capital and the improvement of people's welfare is the main cause of China's development miracle.

The innovation impetus of the public capital and its “immunity” to the capitalist crisis highlight the tremendous power of socialism with Chinese characteristics in breaking free of the shackles of capitalism and continuously developing productive forces. Public capital demonstrates and will continue to demonstrate the historical legitimacy of socialism.