Search results

This paper aims to present the simulation, fabrication and testing of a novel ultra-wide band (UWB) band-pass filters (BPFs) with better transmission and rejection characteristics on a low-loss Taconic substrate and analyze using the coupled theory of resonators for UWB range covering L, S, C and X bands for radars, global positioning system (GPS) and satellite communication applications.

The filter is designed with a bent coupled transmission line on the top copper layer. Defected ground structures (DGSs) like complementary split ring resonators (CSRRs), V-shaped resonators, rectangular slots and quad circle slots (positioned inwards and outwards) are etched in the ground layer of the filter. The circular orientation of V-shaped resonators adds compactness when linearly placed. By arranging the quad circle slots outwards and inwards at the corner and core of the ground plane, respectively, two filters (Filters I and II) are designed, fabricated and measured. These two filters feature a quasi-elliptic response with transmission zeros (TZs) on either side of the bandpass response, making it highly selective and reflection poles (RPs), resulting in a low-loss filter response. The transmission line model and coupled line theory are implemented to analyze the proposed filters.

Two filters by placing the quad circle slots outwards (Filter I) and inwards (Filter II) were designed, fabricated and tested. The fabricated model (Filter I) provides transmission with a maximum insertion loss of 2.65 dB from 1.5 GHz to 9.2 GHz. Four TZs and five RPs are observed in the frequency response. The lower and upper stopband band width (BW) of the measured Filter I are 1.2 GHz and 5.5 GHz of upper stopband BW with rejection level greater than 10 dB, respectively. Filter II (inward quad circle slots) operates from 1.4 GHz to 9.05 GHz with 1.65 dB maximum insertion loss inside the passband with four TZs and four RPs, which, in turn, enhances the filter characteristics in terms of selectivity, flatness and stopband. Moreover, 1 GHz BW of lower and upper stopbands are observed. Thus, the fabricated filters (Filters I and II) are therefore evaluated, and the outcomes show good agreement with the electromagnetic simulation response.

The limitation of this work is the back radiation caused by DGS, which can be eradicated by placing the filter in the cavity and retaining its performance.

The proposed UWB BPFs with novel resonators find their role in the UWB range covering L, S, C and X bands for radars, GPS and satellite communication applications.

To the best of the authors’ knowledge, for the first time, the authors develop a compact UWB BPFs (Filters I and II) with BW greater than 7.5 GHz by combining reformed coupled lines and DGS resonators (CSRRs, V-shaped resonators [modified hairpin resonators], rectangular slots and quad circle slots [inwards and outwards]) for radars, GPS and satellite communication applications.

The effect of viscosity on the performance of disk-shaped electromechanical resonators has been studied and investigated in the past. The vibration frequency of a disk-shaped resonator changes according to the viscosity of the liquid which the resonator is in contact with. Therefore, the purpose of this paper is based on design a sensor for measuring the viscosity of liquids using a disk-shaped electromechanical resonator. The viscosity of liquids is of interest to researchers in industry and medicine.

In this paper, a viscosity sensor for liquids is proposed, which is designed based on a disk-shaped electromechanical resonator. In this proposed sensor, two comb drives are used as electrostatic actuators to stimulate the resonator. Also, two other comb drives are used as electrostatic sensors to monitor the frequency changes of the proposed resonator. The resonance frequency of the resonator in response to different fluids under test varies according to their viscosity.

After calibration of the proposed sensor by nonlinear weights, the viscosity of some liquids are calculated using this sensor and results confirm its accuracy according to the liquids real viscosity.

The design of the proposed sensor and its simulated performance are reported. Also, the viscosity of several different liquids are evaluated with simulations of the proposed sensor and presented.

This paper aims to present a low-cost, edge-fed, windmill-shaped, notch-band eliminator, circular monopole antenna which is practically loaded with a complementary split ring resonator (CSRR) in the middle of the radiating conductor and also uses a partial ground to obtain wide-band performance.

To compensate for the reduced value of gain and reflection coefficient because of the full (complete) ground plane at the bottom of the substrate, the antenna is further loaded with a partial ground and a CSRR. The reduction in the length of ground near the feed line improves the impedance bandwidth, and introduced CSRR results in improved gain with an additional resonance spike. This results in a peak gain 3.895dBi at the designed frequency 2.45 GHz. The extending of three arms in the circular patch not only led to an increase of peak gain by 4.044dBi but also eliminated the notch band and improved the fractional bandwidth 1.65–2.92 GHz.

The work reports a –10dB bandwidth from 1.63 GHz to 2.91 GHz, which covers traditional coverage applications and new specific uses applications such as narrow LTE bands for future internet of things (NB-IoT) machine-to-machine communications 1.8/1.9/2.1/2.3/2.5/2.6 GHz, industry, automation and business-critical cases (2.1/2.3/2.6 GHz), industrial, society and medical applications such as Wi-MAX (3.5 GHz), Wi-Fi3 (2.45 GHz), GSM (1.9 GHz), public safety band, Bluetooth (2.40–2.485 GHz), Zigbee (2.40–2.48Ghz), industrial scientific medical (ISM) band (2.4–2.5 GHz), WCDMA (1.9, 2.1 GHz), 3 G (2.1 GHz), 4 G LTE (2.1–2.5 GHz) and other personal communication services applications. The estimated RLC electrical equivalent circuit is also presented at the end.

Because of full coverage of Bluetooth, Zigbee, WiFi3 and ISM band, the proposed fabricated antenna is suitable for low power, low data rate and wireless/wired short-range IoT-enabled medical applications.

The antenna is fabricated on a piece (66.4 mm × 66.4 mm × 1.6 mm) of low-cost low profile FR-4 epoxy substrate (0.54 λ_g × 0.54 λ_g) with a dielectric constant of 4.4, a loss tangent of 0.02 and a thickness of 1.6 mm. The antenna reflection coefficient, impedance and VSWR are tested on the Keysight technology (N9917A) vector network analyzer, and the radiation pattern is measured in an anechoic chamber.

The purpose of this paper is to gain a better understanding on how metasurfaces behave, in terms of currents in each unit cell. A better knowledge of their behavior could lead to an ad-hoc design for specific applications.

The methodology used is both theoretical and numerical; it is based on circuit theory and on an optimization procedure.

The results show that when the knowledge of the current in each unit cell of a metasurface is needed, the most common approximations currently used are often not accurate. Furthermore, a procedure for the termination of a metasurface, with application-driven goals, is given.

This paper investigates the distribution of the currents in a 2D metamaterial realized with magnetically coupled resonant coils. Different models for the analysis of these structures are illustrated, and the effects of the approximations they introduce on the current values are shown and discussed. Furthermore, proper terminations of the resonators on the boundaries have been investigated by implementing a numerical optimization procedure with the purpose of achieving a uniform distribution of the resonator currents. The results show that the behavior of a metasurface (in terms of currents in each single resonator) depends on different properties; as a consequence, their design is not a trivial task and is dependent on the specific applications they are designed for. A design strategy, with lumped impedance termination, is here proposed.

This work measures the performance characteristics of a hemispherical resonator gyroscope (HRG) and compares it with a numerical model.

This work we explore the optical and piezoelectric measurement methods to determine the resonant frequency of HRG. These experimental results are compared with their numerically obtained values. To explore the performance characteristics, the effect of varying actuation voltages on the sense mode displacement and the piezoelectric sensor output was studied in the absence of input angular rate. The structure was then subjected to range of angular rate signals, at a constant actuation voltage and the corresponding sensor response was analysed.

Experimental values of the resonant frequencies in drive and sense modes are found to be within 8% of the numerical results. The sensor output depicts a quadratic dependency on the applied angular rate, which is synchronous with the governing equations of the HRG. The experimental output is within 12% of that obtained numerically. The sensor is found to resolve upto 0.24 rad/s.

This work presents an in-house developed inexpensive measurement setup for static and dynamic characterization of mesoscale MEMS gyroscopes. The measurement setup can also be modified accordingly for measurement of other MEMS-based devices.

Compact and wideband antennas are the need of modern wireless systems that preferably work with compact, low-profile and easy-to-install devices that provide a wider coverage of operating frequencies. The purpose of this paper is to propose a novel compact and ultrawideband (UWB) microstrip patch antenna intended for high frequency wireless applications.

A square microstrip patch antenna was initially modeled on finite element method-based electromagnetic simulation tool high frequency structure simulator. It was then loaded with a rectangular slit and Koch snowflake-shaped fractal notches for bandwidth enhancement. The fabricated prototype was tested by using vector network analyzer from Agilent Technologies, N5247A, Santa Clara, California, United States (US).

The designed Koch fractal patch antenna is highly compact with dimensions of 10 × 10 mm only and possesses UWB characteristics with multiple resonances in the operating band. The −10 dB measured impedance bandwidth was observed to be approximately 13.65 GHz in the frequency range (23.20–36.85 GHz).

Owing to its simple and compact structure, positive and substantial gain values, high radiation efficiency and stable radiation patterns throughout the frequency band of interest, the proposed antenna is a suitable candidate for high frequency wireless applications in the K (18–27 GHz) and Ka (26.5–40 GHz) microwave bands.

The purpose of this paper is to develop a familiarity analysis of resistive-capacitive (RC) network active circuit operating with unfamiliar low-pass (LP) type negative group delay (NGD) behavior. The design method of NGD circuit is validated by simulation with commercial tool and experimental measurement.

The present research work methodology is structured in three main parts. The familiarity theory of RC-network LP-NGD circuit is developed. The LP-NGD circuit parameters are expressed in function of the targeted time-advance. Then, the feasibility study is based on the theory, simulation and measurement result comparisons.

The RC-network based LP-NGD proof of concept is validated with −1 and −0.5 ms targeted time-advances after design, simulation, test and characterized. The LP-NGD circuit unity gain prototype presents NGD cut-off frequencies of about 269 and 569 Hz for the targeted time-advances, −1 and −0.5 ms, respectively. Bi-exponential and arbitrary waveform signals were tested to verify the targeted time-advance.

The performance of the unfamiliar LP-NGD topology developed in the present study is limited by the parasitic elements of constituting lumped components.

The NGD circuit enables to naturally reduce the undesired delay effect from the electronic and communication systems. The NGD circuit can be exploited to reduce the delay induced by electronic devices and system.

As social impacts of the NGD circuit application, the NGD function is one of prominent solutions to improve the technology performances of future electronic device in term of communication aspect and the transportation system.

The originality of the paper concerns the theoretical approach of the RC-network parameters in function of the targeted time-advance and the input signal bandwidth. In addition, the experimental results are also particularly original.

This study aims to extend the known design guidelines for the polymer-based fused filament fabrication (FFF) 3D printing process with the focus on function-integrated components, specifically optomechanical parts. The potential of this approach is demonstrated by manufacturing function-integrated optomechanics for a low-power solid-state laser system.

For the production of function-integrated additively manufactured optomechanics using the FFF process, essential components and subsystems have been identified for which no design guidelines are available. This includes guidelines for integrating elements, particularly optics, into a polymer structure as well as guidelines for printing functional threads and ball joints. Based on these results, combined with prior research, a function-integrated low-power solid-state laser optomechanic was fabricated via the FFF process, using a commercial 3D printer of the type Ultimaker 3. The laser system's performance was assessed and compared to a reference system that employed commercial optomechanics, additionally confirming the design guidelines derived from the study.

Based on the design goal of function integration, the existing design guidelines for the FFF process are systematically extended. This success is demonstrated by the fabrication of an integrated optomechanic for a solid-state laser system.

Based on these results, scientists and engineers will be able to use the FFF process more extensively and benefit from the possibilities of function-integrated manufacturing.

Extensive research has been published on additive manufacturing of optomechanics. However, this research often emphasizes only cost reduction and short-term availability of components by reprinting existing parts. This paper aims to explore the capabilities of additive manufacturing in the production of function-integrated components to reduce the number of individual parts required, thereby decreasing the workload for system assembly and leading to an innovative production process for optical systems. Consequently, where needed, it provides new design guidelines or extends existing ones and verifies them by means of test series.

Based on the micro-electro-mechanical system (MEMS) technology, acoustic emission sensors have gained popularity owing to their small size, consistency, affordability and easy integration. This study aims to provide direction for the advancement of MEMS acoustic emission sensors and predict their future potential for structural health detection of microprecision instruments.

This paper summarizes the recent research progress of three MEMS acoustic emission sensors, compares their individual strengths and weaknesses, analyzes their research focus and predicts their development trend in the future.

Piezoresistive, piezoelectric and capacitive MEMS acoustic emission sensors are the three main streams of MEMS acoustic emission sensors, which have their own advantages and disadvantages. The existing research has not been applied in practice, and MEMS acoustic emission sensor still needs further research in the aspects of wide frequency/high sensitivity, good robustness and integration with complementary metal oxide semiconductor. MEMS acoustic emission sensor has great development potential.

In this paper, the existing research achievements of MEMS acoustic emission sensors are described systematically, and the further development direction of MEMS acoustic emission sensors in the future research field is pointed out. It provides an important reference value for the actual weak acoustic emission signal detection in narrow structures.

This paper aims to propose a two-element dual fed ultra-wideband (UWB) multiple input multiple output (MIMO) antenna system with no additional decoupling structures. The antenna operates from 3.1 to 10.6 GHz. The antenna finds its usage in on-body wearable device applications.

The antenna system measures 63.80 × 29.80 × 0.7 mm. The antenna radiating element is designed by using a modified dumbbell-shaped structure. Jean cloth material is used as substrate. The isolation improvement is achieved through spacing between two elements.

The proposed antenna has a very low mutual coupling of S₂₁ < −20 dB and impedance matching of S₁₁ < −10 dB. The radiation characteristics are stable in the antenna operating region. It provides as ECC < 0.01, diversity gain >9.9 dB. The antenna offers low average specific absorption rate (SAR) of 0.169 W/kg. The simulated and measured results are found to be in reasonable match.

The MIMO antenna is proposed for on-body communication, hence, a very thin jean cloth material is used as substrate. This negates the necessity of additional material usage in antenna design and the result range indicates good diversity performance and with a low SAR of 0.169 W/kg for on-body performance. This makes it a suitable candidate for textile antenna application.