Search results

The purpose of this paper is to provide the high-pass (HP) negative group delay (NGD) circuit based (RL) network. Synthesis and experimental investigation of HP-NGD circuit are developed.

The research work methodology is organized in three phases. The definition of the HP-NGD ideal specifications is introduced. The synthesis method allowing to determine the RL elements is developed. The validation results are discussed with comparison between the calculated model, simulation and measurement.

This paper shows a validation of the HP-NGD theory with responses confirming NGD optimal frequency, value and attenuation of about (9 kHz, −1.12 µs, −1.64 dB) and (21 kHz, −0.92 µs, −4.81 dB) are measured. The tested circuits have experimented NGD cut-off frequencies around 5 and 11.7 kHz.

The validity of the HP-NGD topology depends on the coil self-inductance resonance. The HP-NGD effect is susceptible to be penalized by the parasitic elements of the self.

The NGD circuit is usefully exploited in the electronic and communication system to reduce the undesired delay effect context. The NGD can be used to compensate the delay in any electronic devices and system.

Applications based on the NGD technology will be helpful in the communication, transportation and security research fields by reducing the delay inherent to any electronic circuit.

The originality of the paper concerns the synthesis formulations of the RL elements in function of the expected HP-NGD optimal frequency, value and attenuation. In addition, an original measurement technique of HP-NGD is also introduced.

This paper aims to develop high-pass (HP) negative group delay (NGD) investigation based on three-port lumped circuit. The main particularity of the proposed three-port passive topology is the consideration of only a single circuit element represented by a capacitor.

The methodology of the paper is to consider the S-matrix equivalent model derived from admittance matrix approach. So, an S-matrix equivalent model of a three-port circuit topology is established from admittance matrix approach. The frequency-dependent basic expressions are explored to perform the HP-NGD analysis. Then, the existence condition of HP-NGD function type is analytically demonstrated. The specific characteristics and synthesis equations of HP-NGD circuit with respect to the desired optimal NGD value are established.

After computing the frequency expressions to perform the HP-NGD analysis, this study demonstrated the existence condition of HP-NGD function type analytically. The validity of the HP-NGD theory is verified by a prototype of three-port circuit. The proof-of-concept (POC) single capacitor three-port circuit presents an NGD response and characteristics from analytical calculation and simulation is in very good correlation.

An innovative theory of HP-NGD three-port circuit is studied. The proposed HP-NGD topology is constituted by only a single capacitor. After the topological description, the S-matrix model is established from the Y-matrix by means of Kirchhoff voltage law and Kirchhoff current law equations. A POC of single capacitor three-port circuit was designed and simulated with a commercial tool. Then, a prototype with a surface-mounted device component was fabricated and tested. As expected, simulation and measurement results in very good agreement with the calculated model show the feasibility of the HP-NGD behavior. This work is compared to other NGD-type function with diverse number of ports and components.

The purpose of this paper is to study, a bridged-T topology with inductorless passive network used as a bandpass (BP) negative group delay (NGD) function.

The BP NGD topology under study is composed of an inductorless passive resistive capacitive network. The circuit analysis is elaborated from the equivalent impedance matrix. Then, the analytical model of the C-shunt bridged-T topology voltage transfer function is established. The BP NGD analysis of the considered topology is developed in function of the bridged-T parameters. The NGD properties and characterizations of the proposed topology are analytically expressed. Moreover, the relevance of the BP NGD theory is verified with the design and fabrication of surface mounted device components-based proof-of-concept (PoC).

From measurement results, the BP NGD network with −151 ns at the center frequency of 1 MHz over −6.6 dB attenuation is in very good agreement with the C-shunt bridged-T PoC.

This paper develops a mathematical modeling theory and measurement of a C-shunt bridged-T network circuit.

The aim of this paper is to provide the theoretical conceptualization of a bandpass (BP) negative group delay (NGD) microstrip circuit. The main objective is to provide a theorization of the particular geometry of the microstrip circuit with experimental validation of the NGD effect.

The methodology followed in this work is organized in three steps. A theoretical model is established of equivalent S-parameters model using Y-matrix analysis. The GD analysis is also presented by showing that the circuit presents a possibility to generate NGD function around certain frequencies. To validate the theoretical model, as proof-of-concept (POC), a microstrip prototype is designed, fabricated and tested.

This work clearly highlighted the modelled (analytical design model), simulated (ADS simulation tool) and measured results are in good correlation. Relying on the proposed theoretical, numerical and experimental models, the BP NGD behaviour is validated successfully with GD responses specified by the NGD centre frequency: it is observed around 2.35 GHz, with an NGD value of about −2 ns.

It is to be noticed the proposed GD analysis requires limitations of the theoretical NGD model. It is depicted and validated through a POC demonstrating that the circuit presents a possibility to generate NGD function around certain frequencies (assuming constraints around usable frequency and bandwidth).

The NGD O-shape topology developed in this work could be exploited in the future in the microwave and radiofrequency context. Thus, it is expected to develop GD equalization technique for radiofrequency and microwave filters, GD compensation of oscillators, filters and communication systems, design of broadband switch-less bi-directional amplifiers, efficient enhancement of feedforward amplifiers, design method of frequency independent phase shifters with negligible delay, synthesis method of arbitrary-angle beamforming antennas. The BP NGD behavior may also be successfully used for the reduction of resonance effect for the electronic compatibility (EMC) of electronic devices.

The non-conventional NGD O-circuit theoretical development and validation through experimental POC could be exploited by academic and industrial developers in the area of wireless communications including, but not restricted to, 5-generation communication systems. The use of the remarkable NGD effect is also useful for the mitigation of electromagnetic interferences between electronic devices and more and more complex electromagnetic environment (current development of Internet of Things[ IoT]).

The originality of this work relies on the new NGD design proposed in this work including the extraction of S-matrix parameters of the microstrip novel structure designed. The validation process based upon an experimental POC showed very interesting levels of NGD O-circuit (nanosecond-GD duration).

The purpose of this paper is to introduce an innovative theoretical, numerical and experimental investigations on the HP NGD function. The identified HP NGD topology under study is constituted by first order passive RC-network. The simulations and measurements confirm in very good agreement the HP NGD behaviors of the tested circuits. NGD responses with optimal values of about -1 ns and cut-off frequencies of about 20 MHz are obtained.

The identified HP NGD topology understudy is constituted by a first-order passive Resistor-capacitor RC network. An innovative approach to HP NGD analysis is developed. The analytical investigation from the voltage transfer function showing the meaning of HP properties is established.

This paper introduces innovative theoretical, numerical and experimental investigations on the HP NGD function.

The NGD characterization as a function of the resistance and capacitance parameters is investigated. The feasibility of the HP NGD function is verified with proofs of concept constituted of lumped surface mounted components on printed circuit boards. The simulations and measurements confirm in very good agreement the HP NGD behaviors of the tested circuits. NGD responses with optimal values of about −1 ns and cut-off frequencies of about 20 MHz are obtained.

Since the Audit Commission’s report on local authority property management in 1987 and subsequent publications, there has been substantial investment in geographic and land information systems (GIS/LIS) by local government. This paper reviews the issues associated with the uptake of information technology (IT) for property management within local government, taking the Audit Commission’s findings as its starting point. It considers how authorities have taken up new technologies and describes progress in this area. British Standard BS 7666 for geographical referencing presents new opportunities for integrated property management in local authorities. The paper discusses this development, drawing on examples from local authorities. The paper concludes by examining the Western Australian Land Information System (WALIS). This is an example of how information sharing between local and central government organisations can add value to data sets collected and maintained by each, reduce duplication of effort and offer a more consistent service.