Search results

1 – 6 of 6
Article
Publication date: 26 April 2024

Valentin Marchal, Yicha Zhang, Rémy Lachat, Nadia Labed and François Peyraut

The use of continuous fiber-reinforced filaments improves the mechanical properties obtained with the fused filament fabrication (FFF) process. Yet, there is a lack of simulation…

Abstract

Purpose

The use of continuous fiber-reinforced filaments improves the mechanical properties obtained with the fused filament fabrication (FFF) process. Yet, there is a lack of simulation tailored tools to assist in the design for additive manufacturing of continuous fiber composites. To build such models, a precise elastic model is required. As the porosity caused by interbead voids remains an important flaw of the process, this paper aims to build an elastic model integrating this aspect.

Design/methodology/approach

To study the amount of porosity, which could be a failure initiator, this study proposes a two step periodic homogenization method. The first step concerns the microscopic scale with a unit cell made of fiber and matrix. The second step is at the mesoscopic scale and combines the elastic material of the first step with the interbead voids. The void content has been set as a parameter of the model. The material models predicted with the periodic homogenization were compared with experimental results.

Findings

The comparison between periodic homogenization results and tensile test results shows a fair agreement between the experimental results and that of the numerical simulation, whatever the fibers’ orientations are. Moreover, a void content reduction has been observed by increasing the crossing angle from one layer to another. An empiric law giving the porosity according to this crossing angle was created. The model and the law can be further used for design evaluation and optimization of continuous fiber-reinforced FFF.

Originality/value

A new elastic model considering interbead voids and its variation with the crossing angle of the fibers has been built. It can be used in simulation tools to design high performance fused filament fabricated composite parts.

Details

Rapid Prototyping Journal, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 1355-2546

Keywords

Article
Publication date: 25 April 2024

Philippe Orsini, Toru Uchida, Remy Magnier-Watanabe, Caroline Benton and Kimihiko Nagata

We empirically assessed the antecedents of subjective well-being at work for French permanent employees.

Abstract

Purpose

We empirically assessed the antecedents of subjective well-being at work for French permanent employees.

Design/methodology/approach

The methodology includes qualitative and quantitative data analyses. In the first phase, interviews elicited the antecedents of subjective well-being at work among permanent French employees. In the second phase, a questionnaire survey was used to confirm the relevance of the antecedents uncovered in the first phase.

Findings

We found 14 distinct elements that influence French employees’ subjective well-being at work: corporate culture, job dissonance, relationships with colleagues, achievement, professional development, relationships with superiors, status, workload, perks, feedback, workspace, diversity and pay. Moreover, we identified discrete antecedents for the three components of subjective well-being at work: work achievement and relationships with superiors and colleagues for positive emotions at work, job dissonance and workload for negative emotions at work and organizational culture and professional development for satisfaction with one’s work.

Originality/value

The original contribution of this study is to have unpacked the black box of the antecedents of subjective well-being in the French workplace and to have uncovered discriminant predictors for each of the three components of subjective well-being at work. Furthermore, we specifically linked each of these three components with their most significant antecedents.

Details

Evidence-based HRM: a Global Forum for Empirical Scholarship, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 2049-3983

Keywords

Article
Publication date: 8 May 2024

Ghassan Elkahlout, Sansom Milton and Ruba Hawa

The purpose of this paper is to explore the feasibility of mud brick houses as an alternative to the more widely adopted emergency shelters used in war-torn Syria. It focuses on…

Abstract

Purpose

The purpose of this paper is to explore the feasibility of mud brick houses as an alternative to the more widely adopted emergency shelters used in war-torn Syria. It focuses on the mud houses’ sustainability, cost effectiveness, cultural preference, income generation and security.

Design/methodology/approach

This study uses a qualitative research approach to a single case study. Interviews were conducted with field experts from the Qatar Red Crescent Society and members of the internally displaced persons (IDPs) community living in mud brick houses.

Findings

The findings reveal that the utilisation of mud houses is a good alternative in relief efforts. The houses are sustainable and cost-effective, take into consideration cultural dynamics and provide economic empowerment to IDPs. However, the maintenance of mud brick houses turns out to be the largest flaw, and this problem requires further research.

Originality/value

The paper highlights the inefficiency of current emergency sheltering practices in Syria and reveals that tents are not a preferred mode of shelter. It further sheds light on a unique case study in which mud houses were used by an aid and development organisation, highlighting its strengths and weaknesses. This paper contributes to practical discussion and ideation on more appropriate housing for IDPs.

Details

International Journal of Disaster Resilience in the Built Environment, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 1759-5908

Keywords

Article
Publication date: 19 April 2024

Simplice Asongu and Nicholas M. Odhiambo

This study assesses the relevance of foreign aid to the incidence of capital flight and unemployment in 20 countries in sub-Saharan Africa.

Abstract

Purpose

This study assesses the relevance of foreign aid to the incidence of capital flight and unemployment in 20 countries in sub-Saharan Africa.

Design/methodology/approach

The study is for the period 1996–2018, and the empirical evidence is based on interactive quantile regressions in order to assess the nexuses throughout the conditional distribution of the unemployment outcome variable.

Findings

From the findings, capital flight has a positive unconditional incidence on unemployment, while foreign aid dampens the underlying positive unconditional nexus. Moreover, in order for the positive incidence of capital flight to be completely dampened, foreign aid thresholds of 2.230 and 3.964 (% of GDP) are needed at the 10th and 25th quantiles, respectively, of the conditional distribution of unemployment. It follows that the relevance of foreign aid in crowding out the unfavourable incidence of capital flight on unemployment is significantly apparent only in the lowest quantiles or countries with below-median levels of unemployment. The policy implications are discussed.

Originality/value

The study complements the extant literature by assessing the importance of development assistance in how capital flight affects unemployment in sub-Saharan Africa.

Details

International Journal of Social Economics, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 0306-8293

Keywords

Article
Publication date: 6 December 2023

Kirsten Cowan and Alena Kostyk

Do luxury consumers negatively evaluate digital interactions (website and social media) by international luxury brands? The topic has received much debate. The authors argue that…

Abstract

Purpose

Do luxury consumers negatively evaluate digital interactions (website and social media) by international luxury brands? The topic has received much debate. The authors argue that luxury brand personality (modern vs. traditional), which encompasses a more stable form of brand identity in global markets, affects evaluations of digital interactions. They further investigate the role of self-brand connection in this process.

Design/methodology/approach

Three experiments on Prolific use a European sample and manipulate a single factor between subjects (modernity: less vs. more; traditionality: less vs. more) of French luxury brands and measure evaluations as the dependent variable. Two studies assesses self-brand connection (continuous) as a moderator (studies 2a, 2b). Study 2b rules out some alternative explanations, with culture (independent vs. collectivist) as an independent variable. A fourth study, using a North American sample on CloudResearch, assesses the effect of personality manipulation (more modernity vs. more traditionality) on consumer evaluations of an Italian brand, and assesses ubiquity perceptions as a mediator.

Findings

Consumers evaluate digital interactions of international luxury brands less favorably when luxury brand personality exhibits more (vs. less) modernity or less (vs. more) traditionality. Perceptions of ubiquity mediate these relationships. When self-brand connection is high, this effect is attenuated.

Originality/value

The research sheds light on the debate on whether luxury brands should create digital interactions in international markets, given that these global brands operate in multiple channels. Findings show that luxury brands can develop strategies based on aspects of their brand identity, a less malleable feature of brand identity within global markets. Additionally, the research contributes to the conversation about a global luxury market. In short, the findings offer evidence in favor of brand identity (personality) influencing the digital channel strategy a brand should undertake in international markets, first, followed by consumer needs.

Details

International Marketing Review, vol. 41 no. 2
Type: Research Article
ISSN: 0265-1335

Keywords

Article
Publication date: 22 April 2024

Maria Mouratidou, William E. Donald, Nimmi P. Mohandas and Yin Ma

Drawing on a framework of conservation of resources theory, the purpose of this paper is to explore the relationship between self-perceived academic performance and individual…

Abstract

Purpose

Drawing on a framework of conservation of resources theory, the purpose of this paper is to explore the relationship between self-perceived academic performance and individual entrepreneurial intention and consider the potential moderating role of (1) participation in serious leisure, (2) perceived stress and/or (3) gender.

Design/methodology/approach

A total of 405 UK-based undergraduates completed the questionnaire, with a representative gender split of 57% women and 43% men.

Findings

The positive relationship between self-perceived academic performance and individual entrepreneurial intention was moderated by serious leisure (stronger when participation in serious leisure increased) and by perceived stress (stronger when levels of perceived stress were lower). However, contrary to our expectations, gender had no statistically significant moderating role.

Practical implications

The practical contribution comes from informing policy for universities and national governments to increase individual entrepreneurial intention in undergraduates.

Originality/value

The theoretical contribution comes from advancing conservation of resources theory, specifically the interaction of personal resources, resource caravans and resource passageways.

Details

Higher Education, Skills and Work-Based Learning, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 2042-3896

Keywords

1 – 6 of 6