Search results

Because of the significant differences in the features and requirements of specific products and the capabilities of various additive manufacturing (AM) solutions, selecting the most appropriate AM technology can be challenging. This study aims to propose a method to solve the complex process selection in 3D printing applications, especially by creating a new multicriteria decision-making tool that takes the direct certainty of each comparison to reflect the decision-maker’s desire effectively.

The methodology proposed includes five steps: defining the AM technology selection decision criteria and constraints, extracting available AM parameters from the database, evaluating the selected AM technology parameters based on the proposed decision-making methodology, improving the accuracy of the decision by adopting newly proposed weighting scheme and selecting optimal AM technologies by integrating information gathered from the whole decision-making process.

To demonstrate the feasibility and reliability of the proposed methodology, this case study describes a detailed industrial application in rapid investment casting that applies the weightings to a tailored AM technologies and materials database to determine the most suitable AM process. The results showed that the proposed methodology could solve complicated AM process selection problems at both the design and manufacturing stages.

This research proposes a unique multicriteria decision-making solution, which employs an exclusive weightings calculation algorithm that converts the decision-maker's subjective priority of the involved criteria into comparable values. The proposed framework can reduce decision-maker's comparison duty and potentially reduce errors in the pairwise comparisons used in other decision-making methodologies.

The purpose of present paper is to enlarge the knowledge about the performance of gypsum powder to realize complex molds or cores for aluminum casting.

The research was divided into two activities: simple; and complex-part production capability. In the simple-part step, the performance of gypsum powder and the minimum mold thickness that would withstand the casting process. In the complex-part step, the authors first investigated the powder removability as a function of geometry complexity and then binder jetting performance was evaluated for the case of lattice-structure fabrication.

All the geometries tested withstand the casting process demonstrating the benefits in terms of complexity part design; however, the process suffers of all the typical defect of casting as misrun, porosity and cold shut.

The results found in this research improve the benefits related to additive manufacturing application in industrial environment and in particular to the binder jetting technology and the rapid casting approach.

This paper aims to investigate the quality of printed surfaces and manufacturing tolerances by comparing the cylindrical cavities machined in parts obtained by fused deposition modeling (FDM) with the holes manufactured during the printing process itself. The comparison focuses on the results of roughness and tolerances, intending to obtain practical references when making assemblies.

The experimental approach focuses on the comparison of the results of roughness and tolerances of two manufacturing strategies: geometric volumes with a through-hole and the through-hole machined in volumes that were initially printed without the hole. Throughout the study, both alternates are explained to make appropriate recommendations.

The study shows the best combinations of technological parameters, both machining and three-dimensional printing, which have been decisive for obtaining successful results. These conclusive results allow enunciating recommendations for use in the industrial environment.

This paper fulfills an identified need to study the dimensional accuracy of the geometries obtained by additive manufacturing, as no experimental evidence has been found of studies that directly address the problem of the FDM-printed part with geometric and dimensional tolerances and desirable surface quality for assembly.

This paper investigates how the adoption of additive manufacturing (AM) impacts upstream supply chain (SC) design and considers the influence of drivers and barriers towards the adoption.

Ten case studies investigating AM adoption by Original Equipment Manufacturers (OEMs) in five industries were conducted. This research is driven by a literature-based framework, and the results are discussed according to the theory of transaction cost economics (TCE).

The case studies reveal four patterns of AM adoption that affect upstream SC design (due to changes in supply base or types of buyer–supplier relationships): make, buy, make and buy and vertical integration. A make or buy decision is based on the level of experience with the technology, on the AM application (rapid manufacturing, prototyping or tooling) and on the need of control over production. Other barriers playing a role in the decision are the high initial investments and the lack of skills and knowledge.

This paper shows how different decisions regarding AM adoption result in different SC designs, with a specific focus on the upstream SC and changes in the supply base. This research is among the first to provide empirical evidence on the impact of AM adoption on upstream SCs and to identify drivers of the make or buy decision when adopting AM through the theoretical lens of TCE.

This study aims to examine factors that determine the adoption of additive manufacturing by small- and medium-sized industries. It provides insights with regard to benefits, challenges and business factors that influence small- and medium-sized industries when adopting this technology. The study also aims to expand the domain of additive manufacturing by including a broader range of challenges and benefits of additive manufacturing in literature.

Using data collected from 175 small- and medium-sized industries, the study has examined through Mann–Whitney test to understand the difference between owners and design engineers on additive manufacturing technology adoption in small- and medium-sized companies.

This study suggests contribution to academic discussion by providing associated factors that have significant impact on the adoption of additive manufacturing technology. Related advantages of additive manufacturing are reduction in inventory cost, lowering the wastage in production and customization of products. The study also indicates that factors such as cost of machinery, higher level of cost in integrating metal components have a negative impact on the adoption of this technology in small- and medium-sized industries.

Because of the chosen research approach, the research results may lack generalizability. Therefore, researchers are encouraged to test the proposed propositions further in the field of challenges and growth in other areas of application of additive manufacturing, for instance, medical sciences, fabric and aerospace.

The study provides important implications that are of interest for both research and practitioners, related to technology management in small- and medium-sized industries, e.g. foundry and machining industries.

This work/study fulfills an identified need of the small- and medium-sized companies in adopting new technologies and contribute to their growth by understanding the need to accept and implement technology.

This paper fulfills an identified need to study how small- and medium-scale companies accept new technologies and factors associated with implementation in the manufacturing process of the organization.

Polyurethane (PUR) foam parts are traditionally manufactured using metallic molds, an unsuitable approach for prototyping purposes. Thus, rapid tooling of disposable molds using fused filament fabrication (FFF) with polylactic acid (PLA) and glycol-modified polyethylene terephthalate (PETG) is proposed as an economical, simpler and faster solution compared to traditional metallic molds or three-dimensional (3D) printing with other difficult-to-print thermoplastics, which are prone to shrinkage and delamination (acrylonitrile butadiene styrene, polypropilene-PP) or high-cost due to both material and printing equipment expenses (PEEK, polyamides or polycarbonate-PC). The purpose of this study has been to evaluate the ease of release of PUR foam on these materials in combination with release agents to facilitate the mulding/demoulding process.

PETG, PLA and hardenable polylactic acid (PLA 3D870) have been evaluated as mold materials in combination with aqueous and solvent-based release agents within a full design of experiments by three consecutive molding/demolding cycles.

PLA 3D870 has shown the best demoldability. A mold expressly designed to manufacture a foam cushion has been printed and the prototyping has been successfully achieved. The demolding of the part has been easier using a solvent-based release agent, meanwhile the quality has been better when using a water-based one.

The combination of PLA 3D870 and FFF, along with solvent-free water-based release agents, presents a compelling low-cost and eco-friendly alternative to traditional metallic molds and other 3D printing thermoplastics. This innovative approach serves as a viable option for rapid tooling in PUR foam molding.

The Government of Korea institutionalized the World Korean Business Convention (WKBC) and the World Korean Business Network (WKBN) to promote Korean diaspora entrepreneurs’ investment in the homeland. Few studies have examined the effectiveness of the WKBC and WKBN and the critical variables affecting them. This paper aims to fill this gap by exploring important variables affecting Korean diaspora entrepreneurs’ investment in the homeland. It also seeks to examine the relationships among these variables to inquire upon a set of critical questions pertaining to Korean diaspora entrepreneurs’ investment in the homeland including the effectiveness of the WKBC and WKBN.

To achieve the above purpose, critical variables influencing Korean diaspora entrepreneurs’ investment in the homeland were identified and four hypotheses that include the inquiries pertaining to the effectiveness of the WKBC and WKBN were developed in terms of those variables. The hypotheses were empirically tested using the survey data gathered from the participants of the annual WKBC.

The current research found that Korean diaspora entrepreneurs’ evaluation of the investment climate in the homeland was not favorable. The WKBC was positively evaluated by Korean diaspora entrepreneurs willing to make investment, There is discrepancy between expectations of the WKBN’s target group (i.e. Korean diaspora entrepreneurs willing to make investment) and its performance for the group, and there is a difference between ascending and descending Korean diaspora entrepreneurs in assessment of investment value of the homeland.

A majority of studies on diaspora entrepreneurship and development have so far cast light on ascending diaspora entrepreneurs while neglecting descending diaspora entrepreneurs. In this regard, the most interesting finding of the current study to both researchers and policymakers may be the fact that descending Korean diaspora entrepreneurs assess the investment value of the homeland differently from ascending Korea diaspora entrepreneurs. The finding calls for further research on causes of the difference, and different natures of descending diaspora entrepreneurs compared to those of ascending diaspora entrepreneurs. Such research will enable policymakers to formulate and implement effective strategic diaspora policies that take the differences into consideration.

Several indigenous credit and savings schemes have been accredited recently in developing countries for the benefit of households and entrepreneurs alike. Famous among them are the Rotating Savings and Credit Associations (ROSCAs) that exist in almost all continents currently. The rapid development of ROSCAs and their varied structures in many countries have been the subject of numerous studies. What has not been thoroughly analysed is the optimum size of these associations and the fact that lending and borrowing is without interest. The aim of this paper is to present a model that would determine the optimum size of ROSCAs and deal with the following issues: how the group size varies with changes in the income level of the members, the demand for the loan, the size of the collected loan and its duration. Further, the question of whether or not lending to the association in return for obtaining larger sums is a violation of the qarḍ (loan) contract is dealt with, and several Sharīʿah compatible formulations are provided.

Economic analysis has been applied to show the optimum size of Qarḍ Ḥasan Associations (QHAs), which are the Sharīʿah-compliant equivalent of ROSCAs, and the Sharīʿah rules of the qarḍ contract to illustrate the legitimacy of group lending.

The major findings of this study are determination of the optimum size of QHAs, the factors that affect the size and suggestion of alternative legal forms for group financing.

Inaccessibility to sources of data to test the hypothesis that has been put forth is the main difficulty encountered when conducting research on the subject.

The paper concludes that the development of informal interest-free ROSCAs in both Muslim and non-Muslim countries is an efficient informal microfinance scheme and that it is compatible with Sharīʿah rules.

The optimum size of ROSCAs and QHAs has been presented in this paper.

This paper explores how the International Accounting Standards Board (IASB) has dealt with the emerging issue of accounting for cryptocurrencies by investigating its constituents' expectations and the motivations underlying its regulatory response.

The theoretical lens of regulatory space is used to analyse the four-year debate around cryptocurrency holdings and informs the extensive thematic analysis of public documents, meetings recordings and comment letters on the topic.

Facing national standard setters' initiatives to regulate accounting for cryptocurrency, the IASB defended its position in the regulatory space through an agenda decision based on ewct 2xisting standards, which was finalised by the International Financial Reporting Standards Interpretation Committee (IFRS IC) despite criticism from constituents and Board members.

The paper provides insights into the IASB approach to a regulatory vacuum regarding a new class of items, which derive from a new and rapidly-evolving technology. Disruptive technology impacts the contested arena of accounting regulation, in which the constituents ask for new solutions and the IASB tries to resist such pressures, while defending its position.

The paper sheds light on the growing importance of agenda decisions in the IFRS environment and on the limits of the IASB long regulatory process in the circumstance of emerging accounting issues deriving from rapidly-evolving technology.

This investigation is timely and relevant as it considers the regulatory issues arising from disruptive technological innovations (i.e. cryptocurrency), shedding light on the limits of regulatory processes in times of technological change.

Crises are major events or periods faced by individuals, groups and society. This paper aims to explore the value of facilitating (un)learning in and from crises. Educators have a key role in building futures literacy (FL) for dealing with uncertainties, understanding emergence and responding to rapid, complex change. Integrating crisis learning as part of FL is important for enhanced anticipatory and crisis responses.

Adapting from causal layered analysis (CLA) methodology, experimental virtual futures workshops were designed and hosted during the coronavirus pandemic. Participants discussed COVID-19 crisis responses and imagined the “new normal”. Sessions explored mindsets applied to make sense and derive meaning from the crisis, myriad ways of adapting to uncertainty, as well as lenses used to imagine post-crisis futures.

In the exploratory and participatory CLA exercises, participants shared on the COVID-19 pandemic and imagined post-crisis futures. Related hopes and fears concerned self, collectives and nature. Overall, despite the dramatic nature of crises, opportunities exist for learning and transformation. Educators play a central role in heightening awareness about the dynamics and nature of crises, and integrating crisis learning into FL, as important and transformative capabilities.

In exploratory dialogues, the “new normal” was applied as a frame for uncertainty. The workshops were hosted during the COVID-19 pandemic as a specific type of crisis. The workshop design is intended to be replicable in various crisis contexts and for iterative rounds with diverse groups. Therefore, futures images exemplify context-specific crisis-time sentiments. The findings presented here do not aim to be generalizable. They are liable to change across different crises, as a crisis evolves and across diverse stakeholders.

Dramatic change and crisis events offer potential moments for development, advancement and transformation. Educators have an important role in facilitating (un)learning in and from crises, elevating FL and expanding futures consciousness. The CLA methodology can assist educators to engage with multiple facets, layers and dimensions of crises. By considering crises intently, educators can help in anticipating emergence, imagining and preparing for diverse alternatives.

The contemporary world is volatile, complex and ambiguous volatile, uncertain, complex and ambiguous (VUCA), as revealed by multiple crises. Crises can spotlight new possibilities and horizons and may be possible turning points. The COVID-19 is an example of a crisis disruption, which provoked thinking and contributed to action about novel prospects. To realise transformative change however, it is important to integrate crisis learning as part of FL, and here educators are an important influence.

Integrating crisis learning into FL is proposed to improve responses to the rapid pace of change and uncertainty as well as to boost crisis preparedness. As part of this, there is value in applying and developing techniques such as CLA that help explore and question assumptions, to understand diverse, possible and transformed futures. This way, we can explore, imagine and expand new horizons.