Search results

This paper aims to overcome the inability of both comparing loss costs and accounting for production resource losses of Overall Equipment Effectiveness (OEE)-related approaches.

The authors conducted a literature review about the studies focusing on approaches combining OEE with monetary units and/or resource issues. The authors developed an approach based on Overall Equipment Cost Loss (OECL), introducing a component for the production resource consumption of a machine. A real case study about a smart multicenter three-spindle machine is used to test the applicability of the approach.

The paper proposes Resource Overall Equipment Cost Loss (ROECL), i.e. a new KPI expressed in monetary units that represents the total cost of losses (including production resource ones) caused by inefficiencies and deviations of the machine or equipment from its optimal operating status occurring over a specific time period. ROECL enables to quantify the variation of the product cost occurring when a machine or equipment changes its health status and to determine the actual product cost for a given production order. In the analysed case study, the most critical production orders showed an actual production cost about 60% higher than the minimal cost possible under the most efficient operating conditions.

The proposed approach may support both production and cost accounting managers during the identification of areas requiring attention and representing opportunities for improvement in terms of availability, performance, quality, and resource losses.

The purpose of the study is to examine the research problem that represents an attempt to approximate the importance of quality costing in managing a modern enterprise using the selected enterprises from small and medium-sized enterprises (SMEs) in Poland.

The primary goal of the research is a need to acquire knowledge about the use of quality cost accounts in enterprises operating in Poland. The research has been conducted in the SMEs of production and services. From October 2018 to December 2018, survey-based research was carried out in the selected SMEs of production and service in Poland. The targeted participants of the study are from the medium-sized enterprises, employing 50–250 people.

The pilot studies conducted in companies indicate that modern enterprises are focused on quality. Many enterprises declare to be continuously improving quality system and quality costing. However, generally, these are large companies that have implemented ISO standards, often part of international corporations. The survey result of the study shows that medium-sized enterprises still make little use of modern cost accounting variants. Based on the study, only 9.75% (39 enterprises) from a representative group of 400 companies from the sectors of manufacturing, services and production as well as service companies apply quality costing. Some of the other enterprises are only taking measures to implement quality cost accounting.

The research has been conducted in randomly selected SMEs in the form of a questionnaire interview. In order to further analyze the construction of quality cost management (QCM) systems and the use of information from QCM by enterprises, case study method should be used more widely.

The results of the study provide useful help for companies that are quality-oriented and want to implement quality costing. The survey has been conducted in 400 enterprises, and the survey results of considered SMEs reveal the most important aspects of the application of quality costing.

The questionnaire used, the answers provided and the resulting conclusions fill the identified research gap. In the author's opinion, findings of research are relevant and useful, not only for accounting practice but also for theory. They show that although TQM and quality costing have been very popular in the literature since the 1990s, the degree of application of quality costing in practice (except for large, often international companies) is too low. So, the suitability of QCM in managing a modern enterprise from the SMEs should be promoted.

This paper analyzes two external costs often associated with port development, cost to fisheries from marine dredge disposal and damages from air pollution, using estimates of development and operation for a proposed (but since cancelled) container port as a case study. For dredge disposal, a bio-economic model was used to assess short- and long-term and indirect (joodweb) damages to fisheries from marine disposal of clean sediments. In the case of air pollution, estimates of annual activity levels and emission coefficients are used to estimate incremental annual emissions of three key pollutants (NOx, HC and CO) for trucks, trains, yard vehicles, and vessels. These estimates allow for phasing in of strict new air pollution regulations. For both external costs, sensitivity analyses are used to reflect uncertainty. Estimates of shadow values in year 2002 dollars amount from $0.094 per cubic yard to $0.169 per cubic yard of clean dredged material for the selected disposal site and from $0.0584 per mile (jor current control standards) to $ 0. 0023 per mile (after phasing in of new regulations) for air pollution from heavy trucks.

This study aims to explore how sustainable business models (SBM) can be developed within agri-innovation systems (AIS) and emphasize an integration of the two with a systemic understanding for reducing food loss and value loss in postharvest agri-food supply chain.

This study conducted longitudinal qualitative research in a developing country with food loss challenges in the postharvest supply chain. This study collected data through multiple rounds of fieldwork, interviews and focus groups over four years. Thematic analysis and “sensemaking” were used for inductive data analysis to generate rich contextual knowledge by drawing upon the lived realities of the agri-food supply chain actors.

First, this study finds that the value losses are varied in the supply chain, encompassing production value, intrinsic value, extrinsic value, market value, institutional value and future food value. This happens through two cumulative effects including multiplier losses, where losses in one model cascade into others, amplifying their impact and stacking losses, where the absence of data stacks or infrastructure pools hampers the realisation of food value. Thereafter, this study proposes four strategies for moving from the loss-incurring current business model to a networked SBM for mitigating losses. This emphasises the need to redefine ownership as stewardship, enable formal and informal beneficiary identification, strengthen value addition and build capacities for empowering communities to benefit from networked SBM with AIS initiatives. Finally, this study puts forth ten propositions for future research in aligning AIS with networked SBM.

This study contributes to understanding the interplay between AIS and SBM; emphasising the integration of the two to effectively address food loss challenges in the early stages of agri-food supply chains. The identified strategies and research propositions provide implications for researchers and practitioners seeking to accelerate sustainable practices for reducing food loss and waste in agri-food supply chains.

Project-driven supply chain risks pose a significant threat to the success of complex development projects, in terms of achieving key performances such as quality, time and efficiency. The purpose of this paper is to adopt a supply chain quality perspective in order to explore and better understand the unique attributes of risks associated with project-driven supply chains for continuously improving the quality of both processes and products.

Theoretically grounded in the framework of Bayesian Belief Networks and Game theory, this paper develops a structured process for assessing and managing risks in project-driven supply chains. The application of the proposed approach is demonstrated through a simulation case study conducted on the development project of Boeing 787 aircraft.

The conflicting incentives amongst stakeholders in a supply chain can jeopardise the success of a project and therefore, assessment of this category of risks classified as “Game theoretic risks” needs special consideration. Project-driven supply chain risks pose a significant threat to the success of complex projects. The results of the study clearly revealed that without mitigating the game theoretic risks, the main objective of timely completion of the Boeing 787 project was not materialised. Further, the lack of management expertise was the major factor contributing to the overall project costs including cost of quality.

The proposed process and analyses present a significant and original insight in terms of capturing the key determinants of both product and service quality such as product performance, convenience and reliability of service, timeliness, ease of maintenance, flexibility, and customer satisfaction and comfort. Propositions are developed for ascertaining the significance of information sharing in a project-driven supply chain, and a fair sharing partnership is introduced to help supply chain managers in managing game theoretic risks in order to achieve the goals of quality, time and efficiency.

Discretionary accruals are earnings quality proxies that illustrate that the greater the value of discretionary accruals, the greater the practice of earnings management and vice versa. High-quality financial reports (especially earnings quality) are expected to help investors and potential investors to make decisions. This study analyses the factors that affect earnings quality, such as pre-managed earnings, liquidity and efficiency. Furthermore, the authors identify the moderating effect of the governance mechanisms proxied by the proportion of independent commissioners in conventional commercial banks listed on the Indonesia Stock Exchange.

This study uses 226 banking data in the pre-corona crisis period 2013 until 2019. The data were analyzed using EViews 10 for hypothesis and MS Excel for a differential test.

The results show that pre-managed earnings, liquidity and efficiency affect earnings quality. The governance mechanisms can moderate liquidity and efficiency on earnings quality, while pre-managed earnings cannot be moderated. The different bank categories (BUKU) of earnings management mechanisms are shown for each BUKU (BUKU 1, 3 and 4 perform earnings management by increasing earnings, BUKU 2 lowering earnings). Another thing is information on the earnings quality between BUKU 2 with BUKU 3 and BUKU 4 because of differences in capital and bank operating coverage regulations.

Further research expects to analyze the factors affecting banking earnings quality concerning applying IFRS 9 (PSAK 71) in Indonesia. Future researchers expect to apply mixed methods to verify the financial statement data and provide comprehensive discussion and genuine insight from their study. Future research requires more samples from companies or an international scale (cross country) to obtain maximum results and be generally accepted.

This study implies that managers should have more control over pre-managed earnings and bank liquidity as manager's incentive to do earnings smoothing. Managers should also pay attention to cost-efficiency and effective implementation of governance mechanisms to maximize earnings quality. This study also implies that policymakers can encourage commercial banks to apply more prudential principles in terms of a reserve for failed loans to minimize earnings management in banking.

The significance of this study revealed in the discussion of the difference test between bank core capital categories (BUKU) and its relation to earnings quality.

Complaint service management, aimed at improving customer satisfaction, provides important content for incorporation into studying a closed-loop supply chain. An analysis of the relationship between two provides the basis for probing the role of complaint management (CM) in the closed-loop supply chain to help it perform more efficiently and effectively through the application of advanced technologies. This paper considers how CM can be computed combining computer communication and information technologies. This computing process involves collection, evaluation and disposal. Using computer telephone integration technology, an integrated multi-channel system is designed; complaint and production evaluated through an intelligent decision support system; and CM processing system established to implement corresponding disposal which reflects the utility of CM. This research on the process of incorporating CM into our studies has significance for computing business service in the future. Based on exergoeconomics theory, the closed-loop supply chain is discussed, and the metric about “system negative environment effect” is introduced to system performance in terms of energy expenditures; a case study illustrates the efficacy of the process

Inventory accumulation is a major problem for any organization, as it not only occupies the valuable storage space, but it also blocks the company's capital, leaving the owners with less cash to run the company's business. Aggregation of inventory in any organization contributes to inventory carrying cost; it affects labor productivity, increases equipment expenses and creates a loss of opportunity associated with it. Therefore, it is essential for any organization to come up with a solution to deal with the stockpile of inventory.

This research aims to examine the potential causes of inventory aggregation in an organization. First, the potential factors for the build-up of inventory are identified from survey data collection, such as questionnaire approach and discussion with industry experts, and then weights are assigned to attributes to study the effects for these factors. After the identification of probable causes, they are analyzed through a multi-criterion decision-making (MCDM) approach and the technique for order of preference by similarity to ideal solution (TOPSIS) to prioritize the severity of these causes toward the accumulation of inventory and take corrective actions to prevent their disruptive effect on the business.

The top three causes identified from the TOPSIS analysis are sales and forecasting error, defects and quality related issues and communication gap between departments. Firstly, we focus on these major contributors and prioritize them using the TOPSIS analysis. Then, we proceed further toward other factors. The main reasons identified for the accumulation of inventory are (1) forecasting error, (2) bulk purchase, (3) data entry error, (4) communication gaps, (5) quality-related issues, (6) product category not traceable and (7) wrong material being procured.

To carry out the data analysis in this research paper, first survey data collection is done. Then, discussions with managers and executives in the particular domain are carried out, and weights are assigned to the attributes and the criteria to study the effects of the identified factors. After that root cause analysis (RCA) is performed to get to the genesis of the problem and to take necessary corrective action, for carrying out this study, a total of seven potential causes were identified and the contribution of these seven causes on five attributes or criteria, i.e. quantity (in tons), holding and carrying cost, effect on labor productivity, loss of opportunity cost and storage space were studied.

This research paper is the author’s original work, and all the analyses carried out are from the discussion with experts in the field and through the in-depth analysis carried out. This research aims to examine the potential causes of the accumulation of inventory in organizations and their contribution toward factors like inventory carrying cost, labor productivity, and opportunity loss and excessive storage space have been analyzed. This research provides great value to the readers in the respective domain.

This paper investigates why bancassurance coexists with alternative insurance distribution channels in the long run, considering the bank channel is known to involve lower costs than traditional distribution systems. It tests the product-quality hypothesis that maintains that the higher costs of some distribution systems represent expenses associated with producing higher product quality, greater service intensity and/or skills to solve principal-agent conflicts.

An analysis is conducted on firms operating in the life segment of the Spanish insurance industry over an eight-year sample period. First, the author estimates cost efficiency and profit inefficiency using data envelopment analysis. Cost efficiency enables one to evaluate if the use of the banking channel increases cost efficiency. Profit inefficiency is addressed to identify the existence/absence of product-quality differences. The performance implications of using bancassurance are analyzed by applying Heckman's two-stage random-effects regression model.

The results support the product-quality arguments. The use of banking channel was found to increase cost efficiency. However, the distribution channel/s utilized did not affect profit inefficiency.

A regulatory environment that supports the development of bancassurance enables this and alternative distribution channels to be sorted into market niches, where each system enjoys comparative advantages in order to minimize insurer costs and maximize insurer revenues. There is no single optimal insurance distribution system.

This is the first study to investigate why bancassurance coexists with alternative insurance distribution channels.

This study aims to investigate why and how shared service centres (SSCs) are implemented as well as how they affect audit firm practice and audit quality.

In this qualitative study guided by the theoretical framework of institutional theory, the authors conducted 25 semi-structured interviews in seven European countries, including 16 interviews with audit partners from Big 4 firms, 6 with audit team members, 2 with interviewees from second-tier audit firms and 1 with a member of an oversight body.

The authors show that the central rationale for audit firms to implement SSCs is economic rather than external legitimacy. The authors find that SSC implementation has substantial effects on audit practices, particularly those related to standardisation, coordination and monitoring activities. The authors also highlight the potential impacts on audit quality.

By exploring the motivation for and effects of SSC implementation amongst audit firms, the authors offer insights into the best practices related to subsequent change processes and audit quality.