Search results

The demand for electricity supply increases day by day due to the rapid growth in the number of industries and consumer devices. The electric power supply needs to be improved by properly arranging distributed generators (DGs). The purpose of this paper is to develop a methodology for optimum placement of DGs using novel algorithms that leads to loss minimization.

In this paper, a novel hybrid optimization is proposed to minimize the losses and improve the voltage profile. The hybridization of the optimization is done through the crow search (CS) algorithm and the black widow (BW) algorithm. The CS algorithm is used for finding some tie-line systems, DG locations, and the BW algorithm is used for finding the rest of the tie-line switches, DG sizes, unlike in usual hybrid optimization techniques.

The proposed technique is tested on two large-scale radial distribution networks (RDNs), like the 119-bus radial distribution system (RDS) and the 135 RDS, and compared with normal hybrid algorithms.

The main novelty of this hybridization is that it shares the parameters of the objective function. The losses of the RDN can be minimized by reconfiguration and incorporating compensating devices like DGs.

Identifying the flow regime is a prerequisite for accurately modeling two-phase flow. This paper aims to introduce a comprehensive data-driven workflow for flow regime identification.

A numerical two-phase flow model was validated against experimental data and was used to generate dynamic pressure signals for three different flow regimes. First, four distinct methods were used for feature extraction: discrete wavelet transform (DWT), empirical mode decomposition, power spectral density and the time series analysis method. Kernel Fisher discriminant analysis (KFDA) was used to simultaneously perform dimensionality reduction and machine learning (ML) classification for each set of features. Finally, the Shapley additive explanations (SHAP) method was applied to make the workflow explainable.

The results highlighted that the DWT + KFDA method exhibited the highest testing and training accuracy at 95.2% and 88.8%, respectively. Results also include a virtual flow regime map to facilitate the visualization of features in two dimension. Finally, SHAP analysis showed that minimum and maximum values extracted at the fourth and second signal decomposition levels of DWT are the best flow-distinguishing features.

This workflow can be applied to opaque pipes fitted with pressure sensors to achieve flow assurance and automatic monitoring of two-phase flow occurring in many process industries.

This paper presents a novel flow regime identification method by fusing dynamic pressure measurements with ML techniques. The authors’ novel DWT + KFDA method demonstrates superior performance for flow regime identification with explainability.

In the process of building the “Belt and Road” and “Bright Road” community of interests between China and Kazakhstan, this paper proposes the construction of an inland nuclear power plant in Kazakhstan. Considering the uncertainty of investment in nuclear power generation, the authors propose the MGT (Monte-Carlo and Gaussian Radial Basis with Tensor factorization) utility evaluation model to evaluate the risk of investment in nuclear power in Kazakhstan and provide a relevant reference for decision making on inland nuclear investment in Kazakhstan.

Based on real options portfolio combined with a weighted utility function, this study takes into account the uncertainties associated with nuclear power investments through a minimum variance Monte Carlo approach, proposes a noise-enhancing process combined with geometric Brownian motion in solving complex conditions, and incorporates a measure of investment flexibility and strategic value in the investment, and then uses a deep noise reduction encoder to learn the initial values for potential features of cost and investment effectiveness. A Gaussian radial basis function used to construct a weighted utility function for each uncertainty, generate a minimization of the objective function for the tensor decomposition, and then optimize the objective loss function for the tensor decomposition, find the corresponding weights, and perform noise reduction to generalize the nonlinear problem to evaluate the effectiveness of nuclear power investment. Finally, the two dimensions of cost and risk (estimation of investment value and measurement of investment risk) are applied and simulated through actual data in Kazakhstan.

The authors assess the core indicators of Kazakhstan's nuclear power plants throughout their construction and operating cycles, based on data relating to a cluster of nuclear power plants of 10 different technologies. The authors compared it with several popular methods for evaluating the benefits of nuclear power generation and conducted subsequent sensitivity analyses of key indicators. Experimental results on the dataset show that the MGT method outperforms the other four methods and that changes in nuclear investment returns are more sensitive to changes in costs while operating cash flows from nuclear power are certainly an effective way to drive investment reform in inland nuclear power generation in Kazakhstan at current levels of investment costs.

Future research could consider exploring other excellent methods to improve the accuracy of the investment prediction further using sparseness and noise interference. Also consider collecting some expert advice and providing more appropriate specific suggestions, which will facilitate the application in practice.

The Novel Coronavirus epidemic has plunged the global economy into a deep recession, the tension between China and the US has made the energy cooperation road unusually tortuous, Kazakhstan in Central Asia has natural geographical and resource advantages, so China–Kazakhstan energy cooperation as a new era of opportunity, providing a strong guarantee for China's political and economic stability. The basic idea of building large-scale nuclear power plants in Balkhash and Aktau is put forward, considering the development strategy of building Kazakhstan into a regional international energy base. This work will be a good inspiration for the investment of nuclear generation.

This study solves the problem of increasing noise by combining Monte Carlo simulation with geometric Brownian motion under complex conditions, adds the measure of investment flexibility and strategic value, constructs the utility function of noise reduction weight based on Gaussian radial basis function and extends the nonlinear problem to the evaluation of nuclear power investment benefit.

This study aims to find the characteristics of supercritical airfoil in helicopter rotor blades for hovering phase using numerical analysis and the validation using experimental results.

Using numerical analysis in the forward phase of the helicopter, supercritical airfoil is compared with the conventional airfoil for the aerodynamic performance. The multiple reference frame method is used to produce the results for rotational analysis. A grid independence test was carried out, and validation was obtained using benchmark values from NASA data.

From the analysis results, a supercritical airfoil in hovering flight analysis proved that the NASA SC rotor produces 25% at 5°, 26% at 12° and 32% better thrust at 8° of collective pitch than the HH02 rotor. Helicopter performance parameters are also calculated based on momentum theory. Theoretical calculations prove that the NASA SC rotor is better than the HH02 rotor. The results of helicopter performance prove that the NASA SC rotor provides better aerodynamic efficiency than the HH02 rotor.

The novelty of the paper is it proved the aerodynamic performance of supercritical airfoil is performing better than the HH02 airfoil. The results are validated with the experimental values and theoretical calculations from the momentum theory.

This paper aims to examine the existing literature on firms’ power through the lens of the supply chain and highlights some gaps that could be covered by future research.

This study uses a systematic framework-based review combining the insights of the antecedents, decisions and outcomes (ADO) and theories, contexts and methods (TCM) frameworks. The review was carried out using a sample of 108 articles published between 1984 and 2022 in 25 prestigious journals.

The ADO framework maps out the state of the art of the antecedents of power (i.e. sources and types of firm power), the decision to use power and the effect that exercising power over other firms may have on firm performance and the quality of inter-firm relationships. In addition, this framework highlights factors that mediate or moderate the decision to exercise power and the factors that mediate or moderate the outcomes of exercising power or power asymmetry. The TCM framework provides insights into the theories, contexts (i.e. countries, industries, level of analysis and sources of data) and methods used by the existing literature. The content analysis using the aforementioned frameworks provides the basis to elaborate propositions for future research on power in the supply chain from the perspective of gender differences.

This systematic literature review offers a comprehensive guide for researchers to understand the antecedents, decisions and outcomes of firm power in the supply chain, as well as the TCM used in the literature. The content analysis using frameworks provides a road map to investigate the proposed factors that might moderate the decision to exercise power and the outcome of exercising power or power asymmetry from the perspective of gender differences. In addition, based on content analysis, the authors make propositions about TCM that could be applied in future research.

From a practical perspective, this systematic literature review may help managers to better understand the sources and consequences of their firm’s power. This would allow managers to make better decisions when negotiating with their supply chain parties, which could potentially lead to better performance for their firms and the whole supply chain.

To the best of the authors’ knowledge, this study is the first to conduct a comprehensive systematic literature review of the different dimensions of firms’ power in the supply chain.

This paper aims to propose, the multi-objective method for optimal planning and operation of distributed generators (DGs) on distribution system (DS) using hybrid technique is proposed.

The proposed hybrid technique denotes hybrid wrapper of black widow optimization algorithm (BWOA) and bear smell search algorithm (BSSA). BWOA accelerates the convergence speed with combination of the search strategy of BSSA; hence, it is named as improved black widow-bear smell search algorithm (IBWBSA) technique.

The multiple-objective operation denotes reducing generation cost, power loss, voltage deviation with optimally planning and operating the DS. For setting up the DG units on DS, IBWBSA technique is equipped to simultaneously reconfigure and find the optimal areas.

In this planning model, the constraints are power balance, obvious power flow limit, bus voltage, distribution substation’s capacity and cost. Then, proposed multiple-objective hybrid method to plan electrical distribution scheme is executed in the MATLAB/Simulink work site.

This study aims to offer a hybrid stand-alone system for electric vehicle (EV) charging stations (CS), an emerging power scheme due to the availability of renewable and environment-friendly energy sources. This paper presents the analysis of a photovoltaic (PV) with an adaptive neuro-fuzzy inference system (ANFIS) algorithm, solid oxide fuel cell (SOFC) and a battery storage scheme incorporated for EV CS in a stand-alone mode. In previous studies, either the hydrogen fuel of SOFC or the irradiance is controlled using artificial neural network. These parameters are not controlled simultaneously using an ANFIS-based approach. The ANFIS-based stand-alone hybrid system controlling both the fuel flow of SOFC and the irradiance of PV is discussed in this paper.

The ANFIS algorithm provides an efficient estimation of maximum power (MP) to the nonlinear voltage–current characteristics of a PV, integrated with a direct current–direct current (DC–DC) converter to boost output voltage up to 400 V. The issue of fuel starvation in SOFC due to load transients is also mitigated using an ANFIS-based fuel flow regulator, which robustly provides fuel, i.e. hydrogen per necessity. Furthermore, to ensure uninterrupted power to the CS, PV is integrated with a SOFC array, and a battery storage bank is used as a backup in the current scenario. A power management system efficiently shares power among the aforesaid sources.

A comprehensive simulation test bed for a stand-alone power system (PV cells and SOFC) is developed in MATLAB/Simulink. The adaptability and robustness of the proposed control paradigm are investigated through simulation results in a stand-alone hybrid power system test bed.

The simulation results confirm the effectiveness of the ANFIS algorithm in a stand-alone hybrid power system scheme.

This paper aims to investigate the thermal performance of equivalent square and circular thermal systems and compare the heat transport and irreversibility of magnetohydrodynamic (MHD) nanofluid flow within these systems.

The research uses a constraint-based approach to analyze the impact of geometric shapes on heat transfer and irreversibility. Two equivalent systems, a square cavity and a circular cavity, are examined, considering identical heating/cooling lengths and fluid flow volume. The analysis includes parameters such as magnetic field strength, nanoparticle concentration and accompanying irreversibility.

This study reveals that circular geometry outperforms square geometry in terms of heat flow, fluid flow and heat transfer. The equivalent circular thermal system is more efficient, with heat transfer enhancements of approximately 17.7%. The corresponding irreversibility production rate is also higher, which is up to 17.6%. The total irreversibility production increases with Ra and decreases with a rise in Ha. However, the effect of magnetic field orientation (γ) on total EG is minor.

Further research can explore additional geometric shapes, orientations and boundary conditions to expand the understanding of thermal performance in different configurations. Experimental validation can also complement the numerical analysis presented in this study.

This research introduces a constraint-based approach for evaluating heat transport and irreversibility in MHD nanofluid flow within square and circular thermal systems. The comparison of equivalent geometries and the consideration of constraint-based analysis contribute to the originality and value of this work. The findings provide insights for designing optimal thermal systems and advancing MHD nanofluid flow control mechanisms, offering potential for improved efficiency in various applications.

The purpose of this study is analysis of deformation and vibrations of turbine blades produced by high electrolyte pressure during electrochemical machining.

An experimental setup was designed, experiments were conducted and the obtained results were compared with the finite element results. The deformations were measured according to various flow rates of electrolyte. In finite element calculations, the pressure distribution created by the electrolyte on the blade surface was obtained in the ANSYS® (A finite element analysis software) Fluent software and transferred to the static structural where the deformation analysis was carried out. Three different parameters were examined, namely blade thickness, blade material and electrolyte pressure on blade disk caused by mass flow rate. The deformation results were compared with the gap distances between cathode and anode.

Large deformations were obtained at the free end of the blade and the most curved part of it. The appropriate pressure values for the electrolyte to be used in the production of blisk blades were proposed numerically. It has been determined that high pressure applications are not suitable for gap distance lower than 0.5 mm.

When the literature is examined, it is required that the high speed flow of the electrolyte is desired in order to remove the parts that are separated from the anode from the machining area during electrochemical machining. However, the electrolyte flowing at high speeds causes high pressure in the blisk blades, excessive deformation and vibration of the machined part, and as a result, contact of the anode with the cathode. This study provides important findings for smooth electro chemical machining at high electrolyte flows.

The study aims to identify the possible risk factors for electricity grids operational disruptions and to determine the most critical and influential risk indicators.

A multi-criteria decision-making best-worst method (BWM) is employed to quantitatively identify the most critical risk factors. The grey causal modeling (GCM) technique is employed to identify the causal and consequence factors and to effectively quantify them. The data used in this study consisted of two types – quantitative periodical data of critical factors taken from their respective government departments (e.g. Indian Meteorological Department, The Central Water Commission etc.) and the expert responses collected from professionals working in the Indian electric power sector.

The results of analysis for a case application in the Indian context shows that temperature dominates as the critical risk factor for electrical power grids, followed by humidity and crop production.

The study helps to understand the contribution of factors in electricity grids operational disruptions. Considering the cause consequences from the GCM causal analysis, rainfall, temperature and dam water levels are identified as the causal factors, while the crop production, stock prices, commodity prices are classified as the consequence factors. In practice, these causal factors can be controlled to reduce the overall effects.

From the results of the analysis, managers can use these outputs and compare the risk factors in electrical power grids for prioritization and subsequent considerations. It can assist the managers in efficient allocation of funds and manpower for building safeguards and creating risk management protocols based on the severity of the critical factor.

The research comprehensively analyses the risk factors of electrical power grids in India. Moreover, the study apprehends the cause-consequence pair of factors, which are having the maximum effect. Previous studies have been focused on identification of risk factors and preliminary analysis of their criticality using autoregression. This research paper takes it forward by using decision-making methods and causal analysis of the risk factors with blend of quantitative and expert response based data analysis to focus on the determination of the criticality of the risk factors for the Indian electric power grid.