Search results

At this moment, there is substantial anxiety surrounding the fire safety of huge reinforced concrete (RC) constructions. The limitations enforced by test facilities, technology, and high costs have significantly limited both full-scale and scaled-down structural fire experiments. The behavior of an individual structural component can have an impact on the entire structural system when it is connected to it. This paper addresses the development and testing of a self-straining preloading setup that is used to perform thermomechanical action in RC beams and slabs.

Thermomechanical action is a combination of both structural loads and a high-temperature effect. Buildings undergo thermomechanical action when it is exposed to fire. RC beams and slabs are one of the predominant structural members. The conventional method of testing the beams and slabs under high temperatures will be performed by heating the specimens separately under the desired temperature, and then mechanical loading will be performed. This gives the residual strength of the beams and slabs under high temperatures. This method does not show the real-time behavior of the element under fire. In real-time, a fire occurs simultaneously when the structure is subjected to desired loads and this condition is called thermomechanical action. To satisfy this condition, a unique self-training test setup was prepared. The setup is based on the concept of a prestressing condition where the load is applied through the bolts.

To validate the test setup, two RC beams and slabs were used. The test setup was tested in service load range and a temperature of 300 °C. One of the beams and slabs was tested conventionally with four-point bending and point loading on the slab, and another beam and slab were tested using the preloading setup. The results indicate the successful operation of the developed self-strain preloading setup under thermomechanical action.

Gaining insight into the unpredictable reaction of structural systems to fire is crucial for designing resilient structures that can withstand disasters. However, comprehending the instantaneous behavior might be a daunting undertaking as it necessitates extensive testing resources. Therefore, a thorough quantitative and qualitative numerical analysis could effectively evaluate the significance of this research.

The study was performed to validate the thermomechanical load setup for beams and slabs on a single-bay single-storey RC frame with and without slab under various fire possible scenarios. The thermomechanical load setup for RC members is found to be scarce.

Concrete gravity dams are important structures for flood control and hydraulic power generation, but they can be vulnerable to seismic activity due to ground movements that trigger crack propagation.

To better understand the factors that affect the stability of concrete gravity dams against concrete fracture during earthquakes, a concrete plastic damage model has been utilized with two new expressions to simulate compressive and tensile damage variables.

The findings showed that the crack patterns were strongly influenced by the concrete’s strength. The simulation results led to the proposal of appropriate concrete properties aimed at minimizing damage. These findings, together with the proposed model, offer significant insights that can enhance the safety and stability of concrete gravity dam structures.

This study offers a comprehensive analysis of concrete behavior under varying grades and introduces simple and robust expressions for evaluating concrete parameters in plastic damage models. The versatility of these expressions enables accurate simulation of stress-strain curves for different grades, resulting in excellent agreement between model results and experimental findings. The simulation of the Koyna Dam case study demonstrates a similarity in crack patterns with previous simulations and field observations.

Additive lamination manufacturing (ALM), as a novel additive manufacturing technology, builds up the geometry via the lamination of fiber-reinforced polymer (FRP) fabric laterally, rendering it suitable for fabricating large-scale Stay-in-Place concrete formwork. This paper aims to investigate the control parameters and structure performance of ALM and assess its application for the fabrication of large-scale concrete formwork.

Based on previous feasibility studies, this research systematically investigates the control and material parameters that influence horizontal and vertical extrusion speeds, as well as the overall quality of ALM. Once the system parameters are established, a series of prototypes are fabricated and tested to validate the tensile strength of the formwork and its reinforcement capabilities. In addition, this study assesses the potential geometric freedom and implementation constraints of ALM.

This research identifies the essential control parameters for path planning in ALM and examines their impact on fabrication. In addition, this paper evaluates ALM’s strengths and limitations in producing concrete formwork for large-scale concrete structures, comparing these to industry benchmarks.

A critical challenge in additive manufacturing lies in its scalability and compatibility with existing construction processes. In comparison to concrete, FRP offers advantages such as being lighter, easier to handle and providing surface protection and reinforcement. These qualities make FRP superior for formwork and compatible with existing building standards. Despite its advantages and potential, the current path planning and control model in 3D printing do not apply to ALM due to its novel build-up process. Also, the performance of fabricated parts as part of integrated large-scale structures is yet to be studied.

The purpose of this study is to forecast the mechanical properties of ternary blended concrete (TBC) modified with oyster shell powder (OSP) and shea nutshell ash (SNA) using deep neural network (DNN) models.

DNN models with three hidden layers, each layer containing 5–30 nodes, were used to predict the target variables (compressive strength [CS], flexural strength [FS] and split tensile strength [STS]) for the eight input variables of concrete classes 25 and 30 MPa. The concrete samples were cured for 3–120 days. Levenberg−Marquardt's backpropagation learning technique trained the networks, and the model's precision was confirmed using the experimental data set.

The DNN model with a 25-node structure yielded a strong relation for training, validating and testing the input and output variables with the lowest mean squared error (MSE) and the highest correlation coefficient (R) values of 0.0099 and 99.91% for CS and 0.010 and 98.42% for FS compared to other architectures. However, the DNN model with a 20-node architecture yielded a strong correlation for STS, with the lowest MSE and the highest R values of 0.013 and 97.26%. Strong relationships were found between the developed models and raw experimental data sets, with R² values of 99.58%, 97.85% and 97.58% for CS, FS and STS, respectively.

To the best of the authors’ knowledge, this novel research establishes the prospects of replacing SNA and OSP with Portland limestone cement (PLC) to produce TBC. In addition, predicting the CS, FS and STS of TBC modified with OSP and SNA using DNN models is original, optimizing the time, cost and quality of concrete.

This study aims to investigate how configurations of boundary objects (BOs) support innovation teams in developing innovative product concepts. Specifically, it explores the effectiveness of different artefact configurations in facilitating collaboration and bridging knowledge boundaries during the concept development process.

The research is based on data from ten undergraduate innovation teams working with an industry partner in a creative industry. Six categories of BOs are identified, which serve as tools for collaboration. The study applies fsQCA (fuzzy-set qualitative comparative analysis) to analyse the configurations employed by the teams to bridge knowledge boundaries and support the development of innovative product concepts.

The findings of the study reveal two distinct groups of configurations: product envisioning and product design. The configurations within the “product envisioning” group support the activities of visioning and pivoting, enabling teams to innovate the product concept by altering the product vision. On the other hand, the configurations within the “product design” group facilitate experimenting, modelling and prototyping, allowing teams to design the attributes of the innovative product concept while maintaining the product vision.

This research contributes to the field of innovation by providing insights into the role of BOs and their configurations in supporting innovation teams during concept development. The results suggest that configurations of “product envisioning” support bridging semantic knowledge boundaries, while configurations within “product design” bridge pragmatic knowledge boundaries. This understanding contributes to the broader field of knowledge integration and innovation in design contexts.

The purpose of this paper is to study the effects of sports sponsorship on brand equity using two managerially related outcomes: price premium and market share.

This study uses a best–worst discrete choice experiment (BWDCE) and compares the outcome with that of the purchase intention scale, an established probabilistic measure of purchase intention. The total sample consists of 409 fans of three soccer teams sponsored by three different competing brands: Nike, Adidas and Puma.

With sports sponsorship, fans were willing to pay more for the sponsor’s product, with the sponsoring brand obtaining the highest market share. Prominent brands generally performed better than less prominent brands. The best–worst scaling method was also 35% more accurate in predicting brand choice than a purchase intention scale.

Future research could use the same method to study other types of sponsors, such as title sponsors or other product categories.

Sponsorship managers can use this methodology to assess the return on investment in sponsorship engagement.

Prior sponsorship studies on brand equity tend to ignore market share or fans’ willingness to pay a price premium for a sponsor’s goods and services. However, these two measures are crucial in assessing the effectiveness of sponsorship. This study demonstrates how to conduct such an assessment using the BWDCE method. It provides a clearer picture of sponsorship in terms of its economic value, which is more managerially useful.

This research aims to propose a model for the complex decision-making involved in the ecological restoration of mega-infrastructure (e.g. railway engineering). This model is based on multi-source heterogeneous data and will enable stakeholders to solve practical problems in decision-making processes and prevent delayed responses to the demand for ecological restoration.

Based on the principle of complexity degradation, this research collects and brings together multi-source heterogeneous data, including meteorological station data, remote sensing image data, railway engineering ecological risk text data and ecological restoration text data. Further, this research establishes an ecological restoration plan library to form input feature vectors. Random forest is used for classification decisions. The ecological restoration technologies and restoration plant species suitable for different regions are generated.

This research can effectively assist managers of mega-infrastructure projects in making ecological restoration decisions. The accuracy of the model reaches 0.83. Based on the natural environment and construction disturbances in different regions, this model can determine suitable types of trees, shrubs and herbs for planting, as well as the corresponding ecological restoration technologies needed.

Managers should pay attention to the multiple types of data generated in different stages of megaproject and identify the internal relationships between these multi-source heterogeneous data, which provides a decision-making basis for complex management decisions. The coupling between ecological restoration technologies and restoration plant species is also an important factor in improving the efficiency of ecological compensation.

Unlike previous studies, which have selected a typical section of a railway for specialized analysis, the complex decision-making model for ecological restoration proposed in this research has wider geographical applicability and can better meet the diverse ecological restoration needs of railway projects that span large regions.

Many organizations currently transition towards digitalized process design, execution, control, assurance and improvement, and the purpose of this research is to empirically demonstrate how data-based operational excellence techniques are useful in digitalized environments by means of the optimization of a robotic process automation deployment.

An interpretive mixed-method case study approach comprising both secondary Lean Six Sigma (LSS) project data together with participant-as-observer archival observations is applied. A case report, comprising per DMAIC phase (1) the objectives, (2) the main deliverables, (3) the results and (4) the key actions leading to achieving the presented results is presented.

Key findings comprise (1) the importance of understanding how to acquire and prepare large system generated data and (2) the need for better large system-generated database validation mechanisms. Finally (3) the importance of process contextual understanding of the LSS project lead is emphasized, together with (4) the need for LSS foundational curriculum developments in order to be effective in digitalized environments.

This study provides a rich prescriptive demonstration of LSS methodology implementation for RPA deployment improvement, and is one of the few empirical demonstrations of LSS based problem solving methodology in industry 4.0 contexts.

This article proposes that survival can be a legitimate organizational goal, challenging a common view that dismisses it as unambitious or contrary to innovation. Drawing parallels from nature and survival strategies across various systems, it advocates that organizations, much like living organisms, should prioritize survivability (i.e. ability to survive) to ensure long-term success. Contrary to being seen as limiting, survival, when understood in its broad sense, can encompass and enhance performance goals such as growth. The article outlines the ERP factors —efficiency, resilience and prominence—as key to achieving survivability, offering a framework for organizations to manage resources, adapt to external forces and balance visibility to thrive amidst challenges.

Conceptual framework.

This model introduces the significance of survivability as an organizational goal.

This article argues for the consideration of survival as an overarching organizational goal, challenging the prevalent view that dismisses it as unambitious or contrary to innovation.

The adoption of energy-efficient systems is crucial for Pakistan to meet its growing energy demand and address its energy challenges. However, adoption of these systems in Pakistan is hindered by several barriers, including economic constraints, lack of awareness and social attitudes toward sustainable development. Therefore, the purpose of this study is to explore adoption of energy-efficient household systems and the associated social influence.

The study incorporates social influence as a mediating factor to examine the relationships between awareness of consequences, perceived consumer effectiveness and attitudes toward the adoption of energy-efficient systems. A quantitative survey method was used to collect data from households from Faisalabad, Pakistan. A total of 203 valid questionnaires were received and data analyzed through SmartPLS 4 for structural equation modeling.

The results revealed that awareness of consequences positively impacts compliance, social identification and internalization, while perceived consumer effectiveness has a positive relationship with social identification and internalization. Moreover, the positive association of social identification and internalization with attitude were supported but relationship of compliance with attitude was unsupported.

The results may also be used to develop compelling marketing campaigns focusing environmental conservation and social influence for positive attitude development.

The study contributes to theoretical literature by examining the empirical relationships between specific individual characteristics and societal pressure that play a critical role in shaping attitudes toward the acceptance of energy-efficient systems. Additionally, the study's findings offer actionable implications for policymakers and marketers, contributing to the development of targeted interventions for promoting sustainable consumption.