Search results

The purpose of this study is to investigate the thermomechanical condition on the shape memory property of Polybutylene adipate-co-terephthalate (PBAT). PBAT is a widely researched and rapidly developed biodegradable copolyester. In a tensile test, we found that the fractured PBAT samples had a heat-driven shape memory effect which piqued our interest, and it will lay a foundation for the application of PBAT in new fields (such as heat shrinkable film).

The shape memory effect of PBAT and the effect of the thermomechanical condition on its shape memory property were confirmed and systematically investigated by a thermal mechanical analyzer and tensile machine.

The results showed that the PBAT film had broad shape memory transform temperature and exhibited excellent thermomechanical stability and shape memory properties. The shape memory fixity ratio (Rf) of the PBAT films was increased with the prestrain temperature and prestrain, where the highest Rf exceeded 90%. The shape memory recovery ratio (Rr) of the PBAT films was increased with the shape memory recovery temperature and decreased with the prestrain value, and the highest Rr was almost 100%. Moreover, the PBAT films had high shape memory recovery stress which increased with the prestrain value and decreased with the prestrain temperature, and the highest shape memory recovery stress can reach 7.73 MPa.

The results showed that PBAT had a broad shape memory transform temperature, exhibited excellent thermomechanical stability and shape memory performance, especially for the sample programmed at high temperature and had a larger prestrian, which will provide a reference for the design, processing and application of PBAT-based heat shrinkable film and smart materials.

This study confirmed and systematically investigated the shape memory effect of PBAT and the effect of the thermomechanical condition on the shape memory property of PBAT.

The purpose of this paper is to investigate of interphasial effects, including temperature dependency, within fiber reinforced polymers on the overall composite behavior. Providing theoretical and numerical approaches in terms of a consistent thermomechanical finite element method framework are further goals of this research.

Starting points for achieving the aims of this research are the partial differential equations describing the evolution of the displacements and temperature within a continuum mechanical setting. Based on the continuous formulation of a thermomechanical equilibrium, constitutive equations are derived, accounting for the modeling of fiber reinforced thermosets and thermoplastics, respectively. The numerical solutions of different initial boundary value problems are obtained by a consistent implementation of the proposed formulations into a finite element framework.

The successful theoretical formulation and numerical modeling of the thermoinelastic matrix materials as well as the thermomechanical treatment of the composite interphase (IP) are demonstrated for an epoxy/glass system. The influence of the IP on the overall composite behavior is successfully investigated and concluded as a further aspect.

A thermomechanical material model, suitable for finite thermoinelasticity of thermosets and thermoplastics is introduced and implemented into a novel kinematic framework in context of the inelastic deformation evolution. The gradually changing material properties between the matrix and the fiber of a composite are continuously formulated and numerically processed, in order to achieve an efficient and realistic approach to model fiber reinforced composites.

The Laplace and Fourier transforms have been employed to find the general solution to the fields equations in porous generalized thermoelastic medium subjected to thermomechanical boundary conditions permeated with various heat sources; in the transformed form. On the boundary surface, the distributed sources have been taken. To get the solution in the physical form, a numerical inversion technique has been used. The effect of continuous and moving heat sources with the thermomechanical boundary conditions; and the response of boundary sources (concentrated and continuous) with heat source varying with depth; on the normal stress component, change in volume fraction field and temperature distribution have been depicted graphically for a particular model. A particular case is also deduced from the present formulation.

The purpose of this paper is to study the partitioned solution procedure for thermomechanical coupling, where each sub‐problem is solved by a separate time integration scheme.

In particular, the solution which guarantees that the coupling condition will preserve the stability of computations for the coupled problem is studied. The consideration is further generalized for the case where each sub‐problem will possess its particular time scale which requires different time step to be selected for each sub‐problem.

Several numerical simulations are presented to illustrate very satisfying performance of the proposed solution procedure and confirm the theoretical speed‐up of computations which follow from the adequate choice of the time step for each sub‐problem.

The paper confirms that one can make the most appropriate selection of the time step and carry out the separate computations for each sub‐problem, and then enforce the coupling which will preserve the stability of computations with such an operator split procedure.

This paper sets out to present developments of a numerical model of squeeze casting process.

The entire process is modelled using the finite element method. The mould filling, associated thermal and thermomechanical equations are discretized using the Galerkin method. The front in the filling analysis is followed using volume of fluid method and the advection equation is discretized using the Taylor Galerkin method. The coupling between mould filling and the thermal problem is achieved by solving the thermal equation explicitly at the end of each time step of the Navier Stokes and advection equations, which allows one to consider the actual position of the front of the filling material. The thermomechanical problem is defined as elasto‐visco‐plastic described in a Lagrangian frame and is solved in the staggered mode. A parallel version of the thermomechanical program is presented. A microstructural solidification model is applied.

During mould filling a quasi‐static Arbitrary Lagrangian Eulerian (ALE) is applied and the resulting temperatures distribution is used as the initial condition for the cooling phase. During mould filling the applied pressure can be used as a control for steering the distribution of the solidified fractions.

The presented model can be used in engineering practice. The industrial examples are shown.

The quasi‐static ALE approach was found to be applicable to model the industrial SQC processes. It was found that the staggered scheme of the solution of the thermomechanical problem could parallelize using a multifrontal parallel solver.

Wiring requirements and thermomechanical factors related to the design and fabrication of Polymer‐on‐metal constraining core PWBs are discussed. The necessity of small plated‐through‐holes for high‐density surface mount design is shown. Typical MLB constructions are shown with techniques for increasing wiring density. A design methodology for the POM construction is defined. The thermomechanical properties of copper‐Invar‐copper and the interactions of the MLB are described. The reliability of small PTHs is measured over a wide range of module constructions. Sixteen mil. diameter PTHs are reliable if the MLB thickness is kept below 0·040 inch. Through‐substrate PTHs make reliable side‐to‐side interconnections.

The purpose of this paper is to develop an effective approach to significantly improve the thermomechanical properties of shape memory polymer (SMP) nanocomposites that show fast thermally responsive shape recovery.

Hexagonal boron nitrides (h-BNs) were incorporated into polymer matrix in an attempt to improve the thermal conductivity and thermally responsive shape recovery behaviour of SMP, respectively. Thermally actuated shape recovery behaviour was recorded and monitored instrumentally.

The results show that both glass transition temperature (T_g) and thermomechanical properties of the SMP nanocomposites have been progressively improved with increasing concentration of h-BNs. Analytical results also suggest that the fast-responsive recovery behaviour of the SMP nanocomposite incorporated with h-BNs was due to the increased thermal conductivity.

A simple way for fabricating SMP nanocomposites with enhanced thermally responsive shape recovery based on the incorporation of h-BNs was developed.

The outcome of this study may help fabrication of SMP nanocomposites with fast responsive recovery behaviour.

This paper gives a review of the finite element techniques (FE) applied in the area of material processing. The latest trends in metal forming, non‐metal forming, powder metallurgy and composite material processing are briefly discussed. The range of applications of finite elements on these subjects is extremely wide and cannot be presented in a single paper; therefore the aim of the paper is to give FE researchers/users only an encyclopaedic view of the different possibilities that exist today in the various fields mentioned above. An appendix included at the end of the paper presents a bibliography on finite element applications in material processing for 1994‐1996, where 1,370 references are listed. This bibliography is an updating of the paper written by Brannberg and Mackerle which has been published in Engineering Computations, Vol. 11 No. 5, 1994, pp. 413‐55.

This paper gives a review of the finite element techniques (FE) applied in the area of material processing. The latest trends in metal forming, non‐metal forming and powder metallurgy are briefly discussed. The range of applications of finite elements on the subjects is extremely wide and cannot be presented in a single paper; therefore the aim of the paper is to give FE users only an encyclopaedic view of the different possibilities that exist today in the various fields mentioned above. An appendix included at the end of the paper presents a bibliography on finite element applications in material processing for the last five years, and more than 1100 references are listed.

This study aims to investigate numerically a thermomechanical behavior of disc brake using ANSYS 11.0 which applies the finite element method (FEM) to solve the transient thermal analysis and the static structural sequentially with the coupled method. Computational fluid dynamics analysis will help the authors in the calculation of the values of the heat transfer (h) that will be exploited in the transient evolution of the brake disc temperatures. Finally, the model resolution allows the authors to visualize other important results of this research such as the deformations and the Von Mises stress on the disc, as well as the contact pressure of the brake pads.

A transient finite element analysis (FEA) model was developed to calculate the temperature distribution of the brake rotor with respect to time. A steady-state CFD model was created to obtain convective heat transfer coefficients (HTC) that were used in the FE model. Because HTCs are dependent on temperature, it was necessary to couple the CFD and FEA solutions. A comparison was made between the temperature of full and ventilated brake disc showing the importance of cooling mode in the design of automobile discs.

These results are quite in good agreement with those found in reality in the brake discs in service and those that may be encountered before in literature research investigations of which these will be very useful for engineers and in the design field in the vehicle brake system industry. These are then compared to experimental results obtained from literatures that measured ventilated discs surface temperatures to validate the accuracy of the results from this simulation model.

The novelty of the work is the application of the FEM to solve the thermomechanical problem in which the results of this analysis are in accordance with the realized and in the current life of the braking phenomenon and in the brake discs in service thus with the thermal gradients and the phenomena of damage observed on used discs brake.