Search results

The purpose of this study is to develop a cylindrical capacitive sensor that has the advantages of high resolution, small size and designability and can be easily installed on lubricant pipeline to monitor lubricant oil debris.

A theoretical model of the cylindrical capacitive sensor is presented to analyze several parameters’ effectiveness on the performance of sensor. Numerical simulations are then conducted to determine the optimal parameters for preliminary experiments. Experiments are finally carried out to demonstrate the detectability of developed capacitive sensors.

It is clear from experimental results that the developed capacitive sensor can monitor the debris in lubricant oil well, and the capacitance values increase almost linearly when the number and size of debris increase.

There is lot of further work to do to apply the presented method into the application. Especially, it is necessary to consider several factors’ influence on monitoring results. These factors include the flow rate of the lubricant oil, the temperature, the debris distribution and the vibration. Moreover, future work should consider the influence of the oil degradation to the capacitance change and other contaminations (e.g. water and dust).

This work conducts a feasibility study on application of capacitive sensing principle for detecting debris in aero engine lubricant oil.

The novelty of the presented capacitance sensor can be summarized into two aspects. One is that the sensor structure is simple and characterized by two coaxial cylinders as electrodes, while conventional capacitive sensors are composed of two parallel plates as electrodes. The other is that sensing mechanism and physical model of the presented sensor is verified and validated by the simulation and experiment.

This paper aims to analyze the application of remotely piloted aircraft (RPA) for remote oil spill sensing.

This paper is an analysis of RPA strong points.

To increase the accuracy and eliminate potentially false contamination detection, which can be caused by external factors, an oil thickness measurement algorithm is used with the help of the multispectral imaging that provides high accuracy and is versatile for any areas of water and various meteorological and atmospheric conditions.

SWOT analysis of implementation of RPA for remote sensing of oil spills.

The use of RPA will improve the remote sensing of oil spills.

The concept of oil spills monitoring needs to be developed for quality data collection, oil pollution control and emergency response.

The research covers the development of a method and design of a device intended for taking samples and determining the presence of oil contamination in an aquatorium area; the procedure includes taking a sample from the water surface, preparing it for transportation and delivering the sample to a designated location by using the RPA. The objective is to carry out the analysis of remote oil spill sensing using RPA. The RPA provides a reliable sensing of oil pollution with significant advantages over other existing methods. The objective is to analyze the use of RPA employing all of their strong points. In this paper, technical aspects of sensors are analyzed, as well as their advantages and limitations.

Connecting autonomous drones to ground operations and services is a prerequisite for the adoption of scalable and sustainable drone services in the built environment. Despite the rapid advance in the field of autonomous drones, the development of ground infrastructure has received less attention. Contemporary airport design offers potential solutions for the infrastructure serving autonomous drone services. To that end, this paper aims to construct a framework for connecting air and ground operations for autonomous drone services. Furthermore, the paper defines the minimum facilities needed to support unmanned aerial vehicles for autonomous logistics and the collection of aerial data.

The paper reviews the state-of-the-art in airport design literature as the basis for analysing the guidelines of manned aviation applicable to the development of ground infrastructure for autonomous drone services. Socio-technical system analysis was used for identifying the service needs of drones.

The key findings are functional modularity based on the principles of airport design applies to micro-airports and modular service functions can be connected efficiently with an autonomous ground handling system in a sustainable manner addressing the concerns on maintenance, reliability and lifecycle.

As the study was limited to the airport design literature findings, the evolution of solutions may provide features supporting deviating approaches. The role of autonomy and cloud-based service processes are quintessentially different from the conventional airport design and are likely to impact real-life solutions as the area of future research.

The findings of this study provided a framework for establishing the connection between the airside and the landside for the operations of autonomous aerial services. The lack of such framework and ground infrastructure has hindered the large-scale adoption and easy-to-use solutions for sustainable logistics and aerial data collection for decision-making in the built environment.

The evolution of future autonomous aerial services should be accessible to all users, “democratising” the use of drones. The data collected by drones should comply with the privacy-preserving use of the data. The proposed ground infrastructure can contribute to offloading, storing and handling aerial data to support drone services’ acceptability.

To the best of the authors’ knowledge, the paper describes the first design framework for creating a design concept for a modular and autonomous micro-airport system for unmanned aviation based on the applied functions of full-size conventional airports.

The purpose of this paper is to explore the emergence of innovation in smart service systems to conceptualize how actor’s relationships through technology-enabled interactions can give birth to novel technologies, processes, strategies and value. The objectives of the study are: to detect the different enablers that activate innovation in smart service systems; and to explore how these can lead dynamically to the emergence of different innovation patterns.

The empirical research adopts an approach based on constructivist grounded theory, performed through observation and semi-structured interviews to investigate the development of innovation in the Italian CTNA (Italian acronym of National Cluster for Aerospace Technology).

The identification and re-elaboration of the novelties that emerged from the analysis of the Cluster allow the elaboration of a diagram that classifies five different shades of innovation, introduced through some related theoretical propositions: technological; process; business model and data-driven; social and eco-sustainable; and practice-based.

The paper embraces a synthesis view that detects the enabling structural and systems dimensions for innovation (the “what”) and the way in which these can be combined to create new technologies, resources, values and social rules (the “how” dimension). The classification of five different kinds of innovation can contribute to enrich extant research on value co-creation and innovation and can shed light on how given technologies and relational strategies can produce varied innovation outcomes according to the diverse stakeholders engaged.

The implementation of project-based learning (PBL) activities in the curricula of engineering students has become a consolidated method to improve their skills. The purpose of this paper is to share the experience acquired by the authors from a decennial case-study on a student team PBL activity focused on design and development of human-powered vehicles (HPVs). A review of the project evolution, boundary constraints and management choices could provide inspiration and suggestions to faculty staff that would like to set-up similar experiences for engineering students in their universities.

A student team was funded by the authors in 2008 to gather engineering students interested in design and construction of HPVs. In the past decade, the team has grown from 10 up to 60 students enrolled per year and stimulated to develop a range of HPV designs for sports and mobility. The project management evolved as a consequence to com ply with the growing ambitions of the group and complexity of the goals.

A thorough analysis of factors contributing to the success of the project led to identification of the key factors to increase student participation: persistence of the faculty staff is essential, attending competitions and challenges increases students’ recruitment and formal recognition of the activity through credits and the implementation of intermediate assessment steps increase the active participation rate. Bigger teams reduce the negative impact of recruits eventually abandoning the project in an early stage. Ambitious goals keep students motivated for longer periods and enable a virtuous circle by transferring enthusiasm and knowledge to new members.

The activity is analyzed starting from a subjective experience perspective and some of the findings/conclusions may be not applicable in a different context. However, such review can suggest strategies on the long-term period to create similar conditions elsewhere.

In the last part of the paper, it is pointed out how PBL projects can provide a fertile ground for innovation and lead to patents and development of new products aiming at the market.

This study contributes to provide an insight view of how a student team PBL activity can grow over a decade if guided by faculty staff.

The purpose of this research is to develop a generic framework of a digital twin (DT)-based automated construction progress monitoring through reality capture to extended reality (RC-to-XR).

IDEF0 data modeling method has been designed to establish an integration of reality capturing technologies by using BIM, DTs and XR for automated construction progress monitoring. Structural equation modeling (SEM) method has been used to test the proposed hypotheses and develop the skill model to examine the reliability, validity and contribution of the framework to understand the DRX model's effectiveness if implemented in real practice.

The research findings validate the positive impact and importance of utilizing technology integration in a logical framework such as DRX, which provides trustable, real-time, transparent and digital construction progress monitoring.

DRX system captures accurate, real-time and comprehensive data at construction stage, analyses data and information precisely and quickly, visualizes information and reports in a real scale environment, facilitates information flows and communication, learns from itself, historical data and accessible online data to predict future actions, provides semantic and digitalize construction information with analytical capabilities and optimizes decision-making process.

The research presents a framework of an automated construction progress monitoring system that integrates BIM, various reality capturing technologies, DT and XR technologies (VR, AR and MR), arraying the steps on how these technologies work collaboratively to create, capture, generate, analyze, manage and visualize construction progress data, information and reports.

The purpose of this paper is to explore earlier stages of complex products and systems (CoPS) innovations, investigating how technology development can be coordinated.

This paper uses a case study methodology, adopting an abductive logic, characterized by a nonlinear and iterative process of systematic confrontations between theoretical framework, empirical fieldwork and case analysis. Specifically, the authors study the Swedish aerospace network, which distinctly represents the CoPS characteristics of intense technology development with long-term goals and project-based activities with universities, research institutes, small medium enterprises and leading firms.

By adding the network perspective in the CoPS literature, the authors found that technology development can be coordinated within the technological and the business dimensions and according to different strategic nets. Also, the authors found that strategic nets co-evolve when their related projects are connected and advance in maturity, and their actors change their network position.

Current research on CoPS often recognizes that the survival and growth of a firm depend on its ability to coordinate innovative projects that are usually implemented during technology development. The findings contribute to this literature by showing how such projects can be implemented through agenda construction and the simultaneous coordination of strategic nets, leading to the synchronization of resources and activities. As such, this study’s framework offers a novel and integrative view of how the short-run and long-run strategies of leading firms can be aligned, and how other actors can contribute to the direction of the innovation path.

The purpose of this paper is to investigate how certain characteristics of the university–industry–government collaboration facilitate knowledge creation and management, hence innovation focusing on particularities of the Brazilian scenario.

As a conceptual basis, there are correlations between theories of knowledge management and the Triple Helix, a model referenced to university–industry–government cooperation. The research was conducted through a multiple case study at two National Institutes of Science and Technology (INCTs in Portuguese).

The main results show the importance of participation in the INCT program, as it enables the creation of an organizational structure with the coordinator’s leadership, who directs the flow of knowledge among organizations and stimulates innovation.

The choice of the topic is justified by the lack of studies on the identification and analyses of the main aspects of this type of collaboration in an integrated way.

The paper aims to promote the development of intelligent materials and the 4D printing technology by introducing recent advances and applications of additive layered manufacturing (ALM) technology of intelligent materials and the development of the 4D printing technology. Also, an arm-type ALM technology of shape memory polymer (SMP) with thermosetting polyurethane is briefly introduced.

This paper begins with an overview of the development and applications of intelligent materials around the world and the 4D printing technology. Then, the authors provide a brief outline of their research on arm-type ALM technology of SMP with thermosetting polyurethane.

The paper provides the recent developments and applications of intelligent materials and 4D printing technology. Then, it is suggested that intelligent materials mixed with different functional materials will be developed, and these types of materials will be more suitable for 4D printing.

This paper overviews the current developments and applications of intelligent materials and its use in 4D printing technology, and briefly states the authors’ research on arm-type ALM technology of SMP with thermosetting polyurethane.

As an advanced manufacturing method, additive manufacturing (AM) technology provides new possibilities for efficient production and design of parts. However, with the continuous expansion of the application of AM materials, subtractive processing has become one of the necessary steps to improve the accuracy and performance of parts. In this paper, the processing process of AM materials is discussed in depth, and the surface integrity problem caused by it is discussed.

Firstly, we listed and analyzed the characterization parameters of metal surface integrity and its influence on the performance of parts and then introduced the application of integrated processing of metal adding and subtracting materials and the influence of different processing forms on the surface integrity of parts. The surface of the trial-cut material is detected and analyzed, and the surface of the integrated processing of adding and subtracting materials is compared with that of the pure processing of reducing materials, so that the corresponding conclusions are obtained.

In this process, we also found some surface integrity problems, such as knife marks, residual stress and thermal effects. These problems may have a potential negative impact on the performance of the final parts. In processing, we can try to use other integrated processing technologies of adding and subtracting materials, try to combine various integrated processing technologies of adding and subtracting materials, or consider exploring more efficient AM technology to improve processing efficiency. We can also consider adopting production process optimization measures to reduce the processing cost of adding and subtracting materials.

With the gradual improvement of the requirements for the surface quality of parts in the production process and the in-depth implementation of sustainable manufacturing, the demand for integrated processing of metal addition and subtraction materials is likely to continue to grow in the future. By deeply understanding and studying the problems of material reduction and surface integrity of AM materials, we can better meet the challenges in the manufacturing process and improve the quality and performance of parts. This research is very important for promoting the development of manufacturing technology and achieving success in practical application.