Search results
1 – 10 of over 1000Mohamed Arif Raj Mohamed, Rajesh Yadav and Ugur Guven
This paper aims to achieve an optimum flow separation control over the airfoil using a passive flow control method by introducing a bio-inspired nose near the leading edge of the…
Abstract
Purpose
This paper aims to achieve an optimum flow separation control over the airfoil using a passive flow control method by introducing a bio-inspired nose near the leading edge of the National Advisory Committee for Aeronautics (NACA) 4 and 6 series airfoil. In addition, to find the optimised leading edge nose design for NACA 4 and 6 series airfoils for flow separation control.
Design/methodology/approach
Different bio-inspired noses that are inspired by the cetacean species have been analysed for different NACA 4 and 6 series airfoils. Bio-inspired nose with different nose length, nose depth and nose circle diameter have been analysed on airfoils with different thicknesses, camber and camber locations to understand the aerodynamic flow properties such as vortex formation, flow separation, aerodynamic efficiency and moment.
Findings
The porpoise nose design that has a leading edge with depth = 2.25% of chord, length = 0.75% of chord and nose diameter = 2% of chord, delays the flow separation and improves the aerodynamic efficiency. Average increments of 5.5% to 6° in the lift values and decrements in parasitic drag (without affecting the pitching moment) for all the NACA 4 and 6 series airfoils were observed irrespective of airfoil geometry such as different thicknesses, camber and camber location.
Research limitations/implications
The two-dimensional computational analysis is done for different NACA 4 and 6 series airfoils at low subsonic speed.
Practical implications
This design improves aerodynamic performance and increases the structural strength of the aircraft wing compared to other conventional high lift devices and flow control devices. This universal leading edge flow control device can be adapted to aircraft wings incorporated with any NACA 4 and 6 series airfoil.
Social implications
The results would be of significant interest in the fields of aircraft design and wind turbine design, lowering the cost of energy and air travel for social benefits.
Originality/value
Different bio-inspired nose designs that are inspired by the cetacean species have been analysed for NACA 4 and 6 series airfoils and universal optimum nose design (porpoise airfoil) is found for NACA 4 and 6 series airfoils.
Details
Keywords
Mohamed Arif Raj Mohamed, Ugur Guven and Rajesh Yadav
The purpose of this paper is to achieve an optimum flow separation control over the airfoil using passive flow control method by introducing bio-inspired nose near the leading…
Abstract
Purpose
The purpose of this paper is to achieve an optimum flow separation control over the airfoil using passive flow control method by introducing bio-inspired nose near the leading edge of the NACA 2412 airfoil.
Design/methodology/approach
Two distinguished methods have been implemented on the leading edge of the airfoil: forward facing step, which induces multiple accelerations at low angle of attack, and cavity/backward facing step, which creates recirculating region (axial vortices) at high angle of attack.
Findings
The porpoise airfoil (optimum bio-inspired nose airfoil) delays the flow separation and improves the aerodynamic efficiency by increasing the lift and decreasing the parasitic drag. The maximum increase in aerodynamic efficiency is 22.4 per cent, with an average increase of 8.6 per cent at all angles of attack.
Research limitations/implications
The computational analysis has been done for NACA 2412 airfoil at low subsonic speed.
Practical implications
This design improves the aerodynamic performance and increases structural strength of the aircraft wing compared to other conventional high-lift devices and flow-control devices.
Originality/value
Different bio-inspired nose designs which are inspired by the cetacean species have been analysed for NACA 2412 airfoil, and optimum nose design (porpoise airfoil) has been found.
Details
Keywords
Xiang Shen, Kai Zeng, Liming Yang, Chengyong Zhu and Laurent Dala
This paper aims to study passive control techniques for transonic flow over a backward-facing step (BFS) using square-lobed trailing edges. The study investigates the efficacy of…
Abstract
Purpose
This paper aims to study passive control techniques for transonic flow over a backward-facing step (BFS) using square-lobed trailing edges. The study investigates the efficacy of upward and downward lobe patterns, different lobe widths and deflection angles on flow separation, aiming for a deeper understanding of the flow physics behind the passive flow control system.
Design/methodology/approach
Large Eddy Simulation and Reynolds-averaged Navier–Stokes were used to evaluate the results of the study. The research explores the impact of upward and downward patterns of lobes on flow separation through the effects of different lobe widths and deflection angles. Numerical methods are used to analyse the behaviour of transonic flow over BFS and compared it to existing experimental results.
Findings
The square-lobed trailing edges significantly enhance the reduction of mean reattachment length by up to 80%. At Ma = 0.8, the up-downward configuration demonstrates increased effectiveness in reducing the root mean square of pressure fluctuations at a proximity of 5-step height in the wake region, with a reduction of 50%, while the flat-downward configuration proves to be more efficient in reducing the root mean square of pressure fluctuations at a proximity of 1-step height in the near wake region, achieving a reduction of 71%. Furthermore, the study shows that the up-downward configuration triggers early spanwise velocity fluctuations, whereas the standalone flat-downward configuration displays less intense crosswise velocity fluctuations within the wake region.
Practical implications
The findings demonstrate the effectiveness of square-lobed trailing edges as passive control techniques, showing significant implications for improving efficiency, performance and safety of the design in aerospace and industrial systems.
Originality/value
This paper demonstrates that the square-lobed trailing edges are effective in reducing the mean reattachment length and pressure fluctuations in transonic conditions. The study evaluates the efficacy of different configurations, deflection angles and lobe widths on flow and provides insights into the flow physics of passive flow control systems.
Details
Keywords
Oskar Szulc, Piotr Doerffer, Pawel Flaszynski and Marianna Braza
This paper aims to describe a proposal for an innovative method of normal shock wave–turbulent boundary layer interaction (SBLI) and shock-induced separation control.
Abstract
Purpose
This paper aims to describe a proposal for an innovative method of normal shock wave–turbulent boundary layer interaction (SBLI) and shock-induced separation control.
Design/methodology/approach
The concept is based on the introduction of a tangentially moving wall upstream of the shock wave and in the interaction region. The SBLI control mechanism may be implemented as a closed belt floating on an air cushion, sliding over two cylinders and forming the outer skin of the suction side of the airfoil. The presented exploratory numerical study is conducted with SPARC solver (steady 2D RANS). The effect of the moving wall is presented for the NACA 0012 airfoil operating in transonic conditions.
Findings
To assess the accuracy of obtained solutions, validation of the computational model is demonstrated against the experimental data of Harris, Ladson & Hill and Mineck & Hartwich (NASA Langley). The comparison is conducted not only for the reference (impermeable) but also for the perforated (permeable) surface NACA 0012 airfoils. Subsequent numerical analysis of SBLI control by moving wall confirms that for the selected velocity ratios, the method is able to improve the shock-upstream boundary layer and counteract flow separation, significantly increasing the airfoil aerodynamic performance.
Originality/value
The moving wall concept as a means of normal shock wave–turbulent boundary layer interaction and shock-induced separation control has been investigated in detail for the first time. The study quantified the necessary operational requirements of such a system and practicable aerodynamic efficiency gains and simultaneously revealed the considerable potential of this promising idea, stimulating a new direction for future investigations regarding SBLI control.
Details
Keywords
Aerodynamics drives the aircraft performance and, thus, influences fuel consumption and environmental compatibility. Further, optimization of aerodynamic shapes is an ongoing…
Abstract
Purpose
Aerodynamics drives the aircraft performance and, thus, influences fuel consumption and environmental compatibility. Further, optimization of aerodynamic shapes is an ongoing design activity in industrial offices; this will lead to incremental improvements. More significant step changes in performance are not expected from pure passive shape design. However, active flow control is a key technology, which has the potential to realize a drastic step change in performance. Flow control targets two major goals: low speed performance enhancements mainly for start and landing phase via control of separation and drag reduction at high speed conditions via skin friction and shock wave control.
Design/methodology/approach
This paper highlights flow control concepts and Airbus involvements for both items. To mature flow control systematically, local applications of separation control technology are of major importance for Airbus. In parallel, but at lower maturity level, investigations are ongoing to reduce the turbulent skin friction at cruise. A popular concept to delay separation at low speed conditions is the implementation of jet actuation control systems flush mounted to the wall of aerodynamic components.
Findings
In 2006, DLR (in collaboration with universities Berlin, Braunschweig and industrial partner Airbus) started to study active flow control for separation delay towards application. Based on basic proof of concepts (achieved in national projects), further flow control hardware developments and wind tunnel and lab testing took place in European funded projects.
Originality/value
Significant lift enhancements were realized via flow control applied to the wing leading edge and the flap.
Details
Keywords
Gautam Gupta, Akshay Ashok Kumar, R. Sivakumar and Jayaraman Kandasamy
This study aims to investigate the prevalence of shock boundary layer interaction (SBLI) in air-breathing intake system is highly undesirable since this leads to high pressure…
Abstract
Purpose
This study aims to investigate the prevalence of shock boundary layer interaction (SBLI) in air-breathing intake system is highly undesirable since this leads to high pressure gradients, typical stream mutilation and pressure drop. A novel flow control mechanism is incorporated in this research holding an array configuration of passive flow control device (micro ramps [MR]) that is adapted to improve the boundary layer stability.
Design/methodology/approach
Two geometric variants of the MR, namely, MR40 and MR80 is considered which reduce the pressure drop during SBLI. The incidence oblique shock wave angle of 34° is considered for the modelling. Large eddy simulation (LES) turbulence model was used with subgrid models of Wall modelled LES, Smagorinsky–Lilly to compute the unsteady effects of SBLI control using micro vortex generators. The unsteady results are compared with steady Reynold’s average Naviers–Stoke’s equation for calibrating the turbulence models.
Findings
The array configuration of MR80 reduces the pressure drop by 22% as compared with no ramp configuration and also reduces the flow distortion in hypersonic inlet. The most affected region of the MR is in the vicinity of center-line. Quantitative results prove that the upstream influence of the shock waves has been largely reduces by MR80 array configuration as compared to single MR80 pattern configuration. Different vortex structures found in the experiments was exclusively predicted using LES.
Originality/value
This paper substantiates the requirement of MR array configuration for transferring the momentum from free stream to the boundary layer and thereby energizing the boundary layer. This process of energization delays the flow separation in hypersonic flow.
Details
Keywords
Fernando Tejero Embuena, Piotr Doerffer, Pawel Flaszynski and Oskar Szulc
Helicopter rotor blades are usually aerodynamically limited by the severe conditions present in every revolution: strong shock wave boundary layer interaction on the advancing…
Abstract
Purpose
Helicopter rotor blades are usually aerodynamically limited by the severe conditions present in every revolution: strong shock wave boundary layer interaction on the advancing side and dynamic stall on the retreating side. Therefore, different flow control strategies might be applied to improve the aerodynamic performance.
Design/methodology/approach
The present research is focussed on the application of passive rod vortex generators (RVGs) to control the flow separation induced by strong shock waves on helicopter rotor blades. The formation and development in time of the streamwise vortices are also investigated for a channel flow.
Findings
The proposed RVGs are able to generate streamwise vortices as strong as the well-known air-jet vortex generators. It has been demonstrated a faster vortex formation for the rod type. Therefore, this flow control device is preferred for applications in which a quick vortex formation is required. Besides, RVGs were implemented on helicopters rotor blades improving their aerodynamic performance (ratio thrust/power consumption).
Originality/value
A new type of vortex generator (rod) has been investigated in several configurations (channel flow and rotor blades).
Details
Keywords
Jeena Joseph, Sathyabhama A. and Surya Sridhar
With aims to increase the aerodynamic efficiency of aerodynamic surfaces, study on flow control over these surfaces has gained importance. With the addition of flow control…
Abstract
Purpose
With aims to increase the aerodynamic efficiency of aerodynamic surfaces, study on flow control over these surfaces has gained importance. With the addition of flow control devices such as synthetic jets and vortex generators, the flow characteristics can be modified over the surface and, at the same time, enhance the performance of the body. One such flow control device is the tubercle. Inspired by the humpback whale’s flippers, these leading-edge serrations have improved the aerodynamic efficiency and the lift characteristics of airfoils and wings. This paper aims to discusses in detail the flow physics associated with tubercles and their effect on swept wings.
Design/methodology/approach
This study involves a series of experimental and numerical analyses that have been performed on four different wing configurations, with four different sweep angles corresponding to 0°, 10°, 20° and 30° at a low Reynolds number corresponding to Rec=100,000.
Findings
Results indicate that the effect of tubercles diminishes with an increase in wing sweep. A significant performance enhancement was observed in the stall and post-stall regions. The addition of tubercles led to a smooth post-stall lift characteristic compared to the sudden loss in the lift with regular wings. Among the four different wings under observation, it was found that tubercles were most effective on the 0° configuration (no sweep), showing a 10.8% increment in maximum lift and a 38.5% increase in the average lift generated in the post-stall region. Tubercles were least effective on 30° configuration. Furthermore, with an increase in wing sweep, co-rotating vortices were distinctly observed rather than counter-rotating vortices.
Originality/value
While extensive numerical and experimental studies have been performed on straight wings with tubercles, studies on the tubercle effect on swept wings at low Reynolds number are minimal and mainly experimental in nature. This study uses numerical methods to explore the complex flow physics associated with tubercles and their implementation on swept wings. This study can be used as an introductory study to implement passive flow control devices in the low Reynolds number regime.
Details
Keywords
Wei Wang, Spiridon Siouris and Ning Qin
The purpose of this article is to present numerical investigations of flow control with piezoelectric actuators on a backward facing step (BFS) and fluidic vortex generators on a…
Abstract
Purpose
The purpose of this article is to present numerical investigations of flow control with piezoelectric actuators on a backward facing step (BFS) and fluidic vortex generators on a NACA0015 aerofoil for the reattachment and separation control through the manipulation of the Reynolds stresses.
Design/methodology/approach
The unsteady flow phenomena associated with both devices are simulated using Spalart–Allmaras-based hybrid Reynolds averaged Navier-Stokes (RANS)/large eddy simulation (LES) models (detached eddy simulation (DES), delayed detached eddy simulation (DDES) and improved delayed detached eddy simulation (IDDES)), using an in-house computational fluid dynamics (CFD) solver. Results from these computations are compared with experimental observations, enabling their reliable assessment through the detailed investigation of the Reynolds stresses and also the separation and reattachment.
Findings
All the hybrid RANS/LES methods investigated in this article predict reasonable results for the BFS case, while only IDDES captures the separation point as measured in the experiments. The oscillating surface flow control method by piezoelectric actuators applied to the BFS case demonstrates that the Reynolds stresses in the controlled case decrease, and that a slightly nearer reattachment is achieved for the given actuation. The fluidic vortex generators on the surface of the NACA0015 case force the separated flow to fully reattach on the wing. Although skin friction is increased, there is a significant decrease in Reynolds stresses and an increase in lift to drag ratio.
Originality/value
The value of this article lies in the assessment of the hybrid RANS/LES models in terms of separation and reattachment for the cases of the backward-facing step and NACA0015 wing, and their further application in active flow control.
Details
Keywords
Hamed Ghandi, Reza Aghaei Togh and Abolghasem Mesgarpoor Tousi
The blade profile and its geometrical features play an important role in the separation of the boundary layer on the blade. Modifying the blade geometry, which might lead to the…
Abstract
Purpose
The blade profile and its geometrical features play an important role in the separation of the boundary layer on the blade. Modifying the blade geometry, which might lead to the delay or elimination of the flow separation, can be considered as a passive flow control methodology. This study aims to find a novel and inexpensive way to reduce loss with appropriate modifications on the leading edge of the turbine blade.
Design/methodology/approach
Three types of wave leading edges were designed with different wavelengths and amplitudes. The selected numbers for the wave characteristics were based on the best results of previous studies. Models with appropriate and independent meshing have been simulated and studied by a commercial software. The distribution of the loss at different planes and mid-plane velocity vectors were shown. The mass flow average of loss at different incidence angles was calculated for the reference blade and modified ones for the sake of comparison.
Findings
The results show that in all three types of modified blades compared to the reference blade, the elimination of flow separation is observed and therefore the reduction of loss at the critical incidence angle of I = –15°. As the amplitude of the wave increased, the amount of loss growing up, while the increase in wavelength caused the loss to decrease.
Originality/value
The results of the present numerical analysis were validated by the laboratory results of the reference blade. The experimental study of modified blades can be used to quantify numerical solutions.
Details