Search results

This study aimed to characterize the concentrations of indoor pollutants (such as carbon dioxide (CO₂), ozone (O₃), nitrogen dioxide (NO₂) and sulfur dioxide (SO₂), as well as particulate matter (PM) (PM₁, PM_2.5 and PM₁₀) in Akure, Nigeria, as well as the relationship between the parameters’ concentrations.

The evaluation, which lasted four months, used a low-cost air sensor that was positioned two meters above the ground. All sensor procedures were correctly carried out.

CO₂ (430.34 ppm), NO₂ (93.31 ppb), O₃ (19.94 ppb), SO₂ (40.87 ppb), PM₁ (29.31 µg/m3), PM_2.5 (43.56 µg/m³), PM₁₀ (50.70 µg/m³), temperature (32.4°C) and relative humidity (50.53%) were the average values obtained. The Pearson correlation depicted the relationships between the pollutants and weather factors. With the exception of April, which had significant SO₂ (18%) and low PM₁₀ (49%) contributions, NO₂ and PM₁₀ were the most common pollutants in all of the months. The mean air quality index (AQI) for NO₂ indicated that the AQI was “moderate” (51–100). In contrast to SO₂, whose AQI ranged from “moderate” to “very unhealthy,” O₃'s AQI ranged from “good” (50) to “unhealthy” (151–200). Since PM₁, PM_2.5 and PM₁₀ made up the majority of PC1’s contribution, both PM_2.5 and PM₁₀ were deemed “hazardous.”

The practical implication of indoor air pollution is long-term health effects, including heart disease, lung cancer and respiratory diseases such as emphysema. Indoor air pollution can also cause long-term damage to people’s nerves, brain, kidneys, liver and other organs.

Lack of literature in terms of indoor air quality (IAQ) in Akure, Ondo State. With this work, the information obtained will assist all stakeholders in policy formulation and implementation. Again, the low-cost sensor used is new to this part of the world.

The main purpose of this study resides essentially in the development of a new tool to quantify the biomass in the bioreactor operating under steady state conditions.

Modeling is the most relevant tool for understanding the functioning of some complex processes such as biological wastewater treatment. A steady state model equation of activated sludge model 1 (ASM1) was developed, especially for autotrophic biomass (XBA) and for oxygen uptake rate (OUR). Furthermore, a respirometric measurement, under steady state and endogenous conditions, was used as a new tool for quantifying the viable biomass concentration in the bioreactor.

The developed steady state equations simplified the sensitivity analysis and allowed the autotrophic biomass (XBA) quantification. Indeed, the XBA concentration was approximately 212 mg COD/L and 454 mgCOD/L for SRT, equal to 20 and 40 d, respectively. Under the steady state condition, monitoring of endogenous OUR permitted biomass quantification in the bioreactor. Comparing XBA obtained by the steady state equation and respirometric tool indicated a percentage deviation of about 3 to 13%. Modeling bioreactor using GPS-X showed an excellent agreement between simulation and experimental measurements concerning the XBA evolution.

These results confirmed the importance of respirometric measurements as a simple and available tool for quantifying biomass.

The purpose of this systematic review is to critically analyze pharmaceutical industry case studies on the implementation of Lean 4.0 methodologies to synthesize key lessons, benefits and best practices. The goal is to inform decisions and guide investments in related technologies for enhancing quality, compliance, efficiency and responsiveness across production and supply chain processes.

The article utilized a systematic literature review (SLR) methodology following five phases: formulating research questions, locating relevant articles, selecting and evaluating articles, analyzing and synthesizing findings and reporting results. The SLR aimed to critically analyze pharmaceutical industry case studies on Lean 4.0 implementation to synthesize key lessons, benefits and best practices.

Key findings reveal recurrent efficiency gains, obstacles around legacy system integration and data governance as well as necessary operator training investments alongside technological upgrades. On average, quality assurance reliability improved by over 50%, while inventory waste declined by 57% based on quantified metrics across documented initiatives synthesizing robotics, sensors and analytics.

As a comprehensive literature review, findings depend on available documented implementations within the search period rather than direct case evaluations. Reporting bias may also skew toward more successful accounts.

Synthesized implementation patterns, performance outcomes and concealed pitfalls provide pharmaceutical leaders with an evidence-based reference guide aiding adoption strategy development, resource planning and workforce transitioning crucial for Lean 4.0 assimilation.

This systematic assessment of pharmaceutical Lean 4.0 adoption offers an unprecedented perspective into the real-world issues, dependencies and modifications necessary for successful integration, absent from conceptual projections or isolated case studies alone until now.

This study aims to evaluate the efficiency of various techniques for enhancing indoor air quality (IAQ) in construction. It analyzed the alterations in the concentration of indoor air pollutants over time for each product employed in controlling pollution sources and removing it, which included eco-friendly substances and adsorbents. The study will provide more precise and dependable data on the effectiveness of these control methods, ultimately supporting the creation of more efficient and sustainable approaches for managing indoor air pollution in buildings.

The research investigates the impact of eco-friendly materials and adsorbents on improving indoor air quality (IAQ) in Dubai's tall apartment buildings. Field experiments were conducted in six units of The Gate Tower, comparing the IAQ of three units built with “excellent” grade eco-friendly materials with three built with “good” grade materials. Another experiment evaluated two adsorbent products (H and Z) in the Majestic Tower over six months. Results indicate that “excellent” grade materials significantly reduced toluene emissions. Adsorbent product Z showed promising results in pollutant reduction, but there is concern about the long-term behavior of adsorbed chemicals. The study emphasizes further research on household pollutant management.

The research studied the effects of eco-friendly materials and adsorbents on indoor air quality in Dubai's new apartments. It found that apartments using “excellent” eco-friendly materials had significantly better air quality, particularly reduced toluene concentrations, compared to those using “good” materials. However, high formaldehyde (HCHO) emissions were observed from wood products. While certain construction materials led to increased ethylbenzene and xylene levels, adsorbent product Z showed promise in reducing pollutants. Yet, there is a potential concern about the long-term rerelease of these trapped chemicals. The study emphasizes the need for ongoing research in indoor pollutant management.

The research, while extensive, faced limitations in assessing the long-term behavior of adsorbed chemicals, particularly the potential for rereleasing trapped pollutants over time. Despite the study spanning a considerable period, indoor air pollutant concentrations in target households did not stabilize, making it challenging to determine definitive improvement effects and reduction rates among products. Comparisons were primarily relative between target units, and the rapid rise in pollutants during furniture introduction warrants further examination. Consequently, while the research provides essential insights, it underscores the need for more prolonged and comprehensive evaluations to fully understand the materials' and adsorbents' impacts on indoor air quality.

The research underscores the importance of choosing eco-friendly materials in new apartment constructions for better IAQ. Specifically, using “excellent” graded materials can significantly reduce harmful pollutants like toluene. However, the study also highlights that certain construction activities, such as introducing furniture, can rapidly elevate pollutant levels. Moreover, while adsorbents like product Z showed promise in reducing pollutants, there is potential for adsorbed chemicals to be rereleased over time. For practical implementation, prioritizing higher-grade eco-friendly materials and further investigation into furniture emissions and long-term behavior of adsorbents can lead to healthier indoor environments in newly built apartments.

The research offers a unique empirical assessment of eco-friendly materials' impact on indoor air quality within Dubai's rapidly constructed apartment buildings. Through field experiments, it directly compares different material grades, providing concrete data on pollutant levels in newly built environments. Additionally, it explores the efficacy of specific adsorbents, which is of high value to the construction and public health sectors. The findings shed light on how construction choices can influence indoor air pollution, offering valuable insights to builders, policymakers and residents aiming to promote public health and safety in urban living spaces.

This paper seeks to assess the performance levels of BA-GS-LSSVM compared to popular standalone algorithms used to build NO₂ prediction models. The purpose of this paper is to pre-process a relatively large data of NO₂ from Internet of Thing (IoT) sensors with time-corresponding weather and traffic data and to use the data to develop NO₂ prediction models using BA-GS-LSSVM and popular standalone algorithms to allow for a fair comparison.

This research installed and used data from 14 IoT emission sensors to develop machine learning predictive models for NO₂ pollution concentration. The authors used big data analytics infrastructure to retrieve the large volume of data collected in tens of seconds for over 5 months. Weather data from the UK meteorology department and traffic data from the department for transport were collected and merged for the corresponding time and location where the pollution sensors exist.

The results show that the hybrid BA-GS-LSSVM outperforms all other standalone machine learning predictive Model for NO₂ pollution.

This paper's hybrid model provides a basis for giving an informed decision on the NO₂ pollutant avoidance system.

This research installed and used data from 14 IoT emission sensors to develop machine learning predictive models for NO₂ pollution concentration.

In this study, the author intend to investigate the impacts of renewable energy use and environmental taxation on sustainable development measured by the adjusted net savings (ANS).

This study employs the quantile regression (QR) for a set of 24 Organization for Cooperation and Economic Development (OECD) countries over the period 1994–2018.

The main empirical findings of estimates show that access to renewable energy and environmental taxation generate positive and significant effects in increasing the ANS for most quantiles. Hence, they are practical tools for achieving sustainable development goals (SDGs).

This study has important implications for governments and policymakers of the OECD countries. Therefore, governments can use subsidies and incentives to promote the adoption of renewable energy sources, energy-efficient technologies and sustainable practices. Similarly, by imposing taxes on pollution and resource use, governments can encourage the adoption of cleaner technologies and practices toward more sustainable behavior.

This paper is based on a novel measure of sustainable development (ANS) and a novel econometric method (QR).