Search results

Cost-benefit (C/B) analysis helps to determine the economic feasibility of business software investments. Research literature and published practices do not recognize substantial software maintenance costs in C/B analysis. Current analyses emphasize the benefits of an initial investment but do not consider the recurring benefits of each enhancement during the software lifecycle. Such analyses could lead to incorrect investment decisions and lost business opportunities. This article aims to review current research on software lifecycle costs and develop a theoretically sound C/B analysis.

This article reviews current C/B analyses and discusses their shortcomings in treating the significant recurring maintenance costs. It analyzes the findings of various studies on software maintenance and synthesizes these findings to identify the nature of various maintenance costs and their benefits. Based on the synthesis, it theorizes various cost and benefit elements for inclusion in a revised C/B analysis.

This article identifies each recurring maintenance cost relevant to C/B analysis. It also identifies recurring benefits from each enhancement that hitherto have been omitted. Finally, this article discusses how these costs and benefits should be treated in the revised C/Bs analysis.

This is a conceptual paper proposing a new C/B analysis and requires an empirical validation.

This article provides a revision of the C/B analysis that is long overdue. It will help to justify a software investment correctly, rank software projects that compete for limited funds and help create a sound software project portfolio. Since 20% of software products may incur 80% of software investment, this analysis will help to make correct software investments and avoid lost business opportunities. This article also describes a practical method to use the revised C/B analysis.

This article provides a revision of the C/B analysis that is long overdue. It will help to justify a software investment correctly, rank software projects that compete for limited funds and help create a sound software project portfolio. Since 20% of software products may incur 80% of software investment, this analysis will help to make correct software investments and avoid lost business opportunities. This article also describes a practical method to use the revised C/B analysis.

The purpose of this study is to enhance the functional properties of Hessian fabric through resin finishing. Hessian bags made of lignocellulosic jute fiber are commonly used to pack, store and transport agro-commodities, including horticultural crops such as rice, potato, onion and wheat. However, because of high water affinity, these bags undergo degradation in properties due to moisture release by the stored commodities themselves. Exposure to natural elements, e.g. rain and dew, also causes moisture absorption in hessian bags. Once the bag gets moistened, degradation of jute bags starts due to microbial attack, leading to loss in tensile strength and change in extensibility, leading to ultimate breakage in warp and weft directions of the fabric.

To overcome the degradation in the functional properties of hessian fabric due to exposure to moisture and microbial attack, the application of semi-synthetic polymeric materials was carried out.

Tenacity, bursting strength, puncture resistance, tear strength and breaking load, as well as life cycle of resin-treated jute fabric was found to be better than control jute.

To the best of the authors’ knowledge, no recent reports of resin finishing on jute (hessian) fabric with semi-synthetic resins are presently available, other than coating with rubber.

The aim of this review is to present together the studies on textile-based moisture sensors developed using innovative technologies in recent years.

The integration levels of the sensors studied with the textile materials are changing. Some research teams have used a combination of printing and textile technologies to produce sensors, while a group of researchers have used traditional technologies such as weaving and embroidery. Others have taken advantage of new technologies such as electro-spinning, polymerization and other techniques. In this way, they tried to combine the good working efficiency of the sensors and the flexibility of the textile. All these approaches are presented in this article.

The presentation of the latest technologies used to develop textile sensors together will give researchers an idea about new studies that can be done on highly sensitive and efficient textile-based moisture sensor systems.

In this paper humidity sensors have been explained in terms of measuring principle as capacitive and resistive. Then, studies conducted in the last 20 years on the textile-based humidity sensors have been presented in detail. This is a comprehensive review study that presents the latest developments together in this area for researchers.

The paper is built upon the conceptual framework of ability, motivation and opportunity (AMO) to identify the effect of the high performance work system (HPWS) on the voice behaviour of the organisation.

The human resource department of the steel plants was approached to facilitate the data collection. A standardised questionnaire was used to collect responses from 169 full-time employees working at different levels and departments in the steel plant in India. Partial least squares structural equation modeling (PLS-SEM) was used to validate and examine the model identifying the relationship of AMO enhancing practices with the voice behaviour in the organisation.

AMO was found to affect voice behaviour in the organisation. The positive and significant effect of ability enhancement practices was examined on the acquiescent voice and the opportunity enhancing practices on the acquiescent and defensive voice in the organisation.

Even though the organisation has tried to improve the employee's ability through proper training and development efforts, the organisation still fails to develop confidence in the employee for giving the suggestion or opinions without hesitation. The research papers try to provide valuable suggestions to the human resource management (HRM) and other managers for improving the voice behaviour of the employees based on the current study that identifies the effect of AMO practices on the voice behaviour of the employees.

Factors affecting voice behaviour are not yet extensively studied in the Indian context. The researcher examined the effect of HPWS, considering the AMO framework on the organisation's acquiescent voice, defensive voice, and prosocial voice behaviour.

This paper aims to investigate the preparation of AlN and Al₂O₃, as well as the effect of nano-AlN and nano-Al₂O₃, on friction and wear properties of copper-steel clad plate immersed in the lubricants.

Nano-AlN or nano-Al₂O₃ (0.1, 0.2, 0.3, 0.4 and 0.5 Wt.%) functional fluids were prepared. Their tribological properties were tested by an MRS-10A four-ball friction tester and a ball-on-plate configuration, and scanning electron microscope observed the worn surface of the plate.

An increase in nano-AlN and Al₂O₃ content enhances the extreme pressure and anti-wear performance of the lubricant. The best performance is achieved at 0.5 Wt.% of nano-AlN and 0.3 Wt.% of nano-Al₂O₃ with PB of 834 N and 883 N, a coefficient of friction (COF) of approximately 0.07 and 0.06, respectively. Furthermore, the inclusion of nano-AlN and nano-Al₂O₃ particles in the lubricant enhances its extreme pressure performance and reduces wear, leading to decreased wear spot depth. The lubricating effect of the nano-Al₂O₃ lubricant on the surface of the copper-steel composite plate is slightly superior to that of the nano-AlN lubricant, with a COF reaching 0.07. Both lubricants effectively fill and lubricate the holes on the surface of the copper-steel composite plate.

AlN and Al₂O₃ as water-based lubricants have excellent lubrication performance and can reduce the COF. It can provide some reference for the practical application of nano-water-based lubricants.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-08-2023-0255/

This study provides an up-to-date review of additive manufacturing (AM) technologies and guidance for selecting the most appropriate ones for specific applications, taking into account the main features, strengths, and limitations of the existing options.

A literature review on AM technologies was conducted to assess the current state-of-the-art. This was followed by a closer examination of different AM machines to gain a deeper insight into their main features and operational characteristics. The conclusions and data gathered were used to formulate a classification and decision-support framework.

The findings indicate the building blocks of the selection process for AM technologies. Furthermore, this work shows the suitability of the existing AM technologies for specific cases and points to opportunities for technological and decision-support improvements. Lastly, more standardization in AM would be beneficial for future research.

The proposed framework offers valuable support for decision-makers to select the most suitable AM technologies, as demonstrated through practical examples of its utilization. In addition, it can help researchers identify the limitations of AM by pinpointing applications where existing technologies fail to meet the requirements.

The study offers a novel classification and decision-support framework for selecting AM technologies, incorporating machine characteristics, process features, physical properties of printed parts, and costs as key features to evaluate the potential of AM. Additionally, it provides a deeper understanding of these features as well as the potential opportunities for AM and its impact on various industries.

Glass material is largely used for load-bearing components in buildings. For this reason, standardized calculation methods can be used in support of safe structural design in common loading and boundary conditions. Differing from earlier literature efforts, the present study elaborates on the load-bearing capacity, failure time and fire endurance of ordinary glass elements under fire exposure and sustained mechanical loads, with evidence of major trends in terms of loading condition and cross-sectional layout. Traditional verification approaches for glass in cold conditions (i.e. stress peak check) and fire endurance of load-bearing members (i.e. deflection and deflection rate limits) are assessed based on parametric numerical simulations.

The mechanical performance of structural glass elements in fire still represents an open challenge for design and vulnerability assessment. Often, special fire-resisting glass solutions are used for limited practical applications only, and ordinary soda-lime silica glass prevails in design applications for load-bearing members. Moreover, conventional recommendations and testing protocols in use for load-bearing members composed of traditional constructional materials are not already addressed for glass members. This paper elaborates on the fire endurance and failure detection methods for structural glass beams that are subjected to standard ISO time–temperature for fire exposure and in-plane bending mechanical loads. Fire endurance assessment methods are discussed with the support of Finite Element (FE) numerical analyses.

Based on extended parametric FE analyses, multiple loading, geometrical and thermo-mechanical configurations are taken into account for the analysis of simple glass elements under in-plane bending setup and fire exposure. The comparative results show that – in most of cases – thermal effects due to fire exposure have major effects on the actual load-bearing capacity of these members. Moreover, the conventional stress peak verification approach needs specific elaborations, compared to traditional calculations carried out in cold conditions.

The presented numerical results confirm that the fire endurance analysis of ordinary structural glass elements is a rather complex issue, due to combination of multiple aspects and influencing parameters. Besides, FE simulations can provide useful support for a local and global analysis of major degradation and damage phenomena, and thus support the definition of simple and realistic verification procedures for fire exposed glass members.