Search results
1 – 10 of 67Abstract
Purpose
The purpose of this paper is to assess the orbital perturbation caused by the gravitational orbit–attitude coupling of spacecraft in the proximity of asteroids.
Design/methodology/approach
The gravitational orbit–attitude coupling perturbation (GOACP), which has been neglected before in the close-proximity orbital dynamics about asteroids, is investigated and compared with other orbital perturbations. The GOACP has its origin in the fact that the gravity acting on a non-spherical extended body is actually different from that acting on a point mass located at the body’s center of mass, which is the approximated model in the orbital dynamics. Besides, a case study of a tethered satellite system is given by numerical simulations.
Findings
It is found that the ratio of GOACP to the asteroid’s non-spherical gravity is the order of ρ/ae, where ρ is the spacecraft’s characteristic dimension and ae is the asteroid’s mean radius. It can also be seen that as ρ increases, GOACP will also increase but the solar radiation pressure (SRP) will decrease due to the decreasing area-to-mass ratio. The GOACP will be more significant than SRP at small orbital radii for a large-sized spacecraft. Based on the results by analyses and simulations, it can be concluded that GOACP needs to be considered in the orbital dynamics for a large-sized spacecraft in the proximity of a small asteroid.
Practical implications
This study is of great importance for the future asteroids missions for scientific explorations and near-Earth objects mitigation.
Originality/value
The GOACP, which has been neglected before, is revealed and studied.
Details
Keywords
J.F. Favier, M.H. Abbaspour‐Fard, M. Kremmer and A.O. Raji
A new method of representing non‐spherical, smooth‐surfaced, axi‐symmetrical particles in discrete element (DE) simulation using model particles comprising overlapping spheres of…
Abstract
A new method of representing non‐spherical, smooth‐surfaced, axi‐symmetrical particles in discrete element (DE) simulation using model particles comprising overlapping spheres of arbitrary size whose centres are fixed in position relative to each other along the major axis of symmetry of the particle is presented. Contact detection and calculation of force‐deformation and particle movement is achieved using standard DE techniques modified to integrate the behaviour of each element sphere with that of the multi‐element particle to which it belongs. The method enables the dynamic behaviour of particles of high aspect ratio and irregular curvature (in two dimensions) to be modelled. The use of spheres to represent a particle takes advantage of the computational speed and accuracy of contact detection for spheres, which should make the method comparable in computational efficiency to alternative schemes for representing non‐spherical particles.
Details
Keywords
The purpose of this paper is to show how particle scale simulation of industrial particle flows using DEM (discrete element method) offers the opportunity for better understanding…
Abstract
Purpose
The purpose of this paper is to show how particle scale simulation of industrial particle flows using DEM (discrete element method) offers the opportunity for better understanding of the flow dynamics leading to improvements in equipment design and operation.
Design/methodology/approach
The paper explores the breadth of industrial applications that are now possible with a series of case studies.
Findings
The paper finds that the inclusion of cohesion, coupling to other physics such fluids, and its use in bubbly and reacting flows are becoming increasingly viable. Challenges remain in developing models that balance the depth of the physics with the computational expense that is affordable and in the development of measurement and characterization processes to provide this expanding array of input data required. Steadily increasing computer power has seen model sizes grow from thousands of particles to many millions over the last decade, which steadily increases the range of applications that can be modelled and the complexity of the physics that can be well represented.
Originality/value
The paper shows how better understanding of the flow dynamics leading to improvements in equipment design and operation can potentially lead to large increases in equipment and process efficiency, throughput and/or product quality. Industrial applications can be characterised as large, involving complex particulate behaviour in typically complex geometries. The critical importance of particle shape on the behaviour of granular systems is demonstrated. Shape needs to be adequately represented in order to obtain quantitative predictive accuracy for these systems.
Details
Keywords
Xiaoyue Wang, Zhanfu Li, Xin Tong and Xiaole Ge
The purpose of this study is to explore how particle shape influences the screening, including screening efficiency per unit time, and the relationship between vibration…
Abstract
Purpose
The purpose of this study is to explore how particle shape influences the screening, including screening efficiency per unit time, and the relationship between vibration parameters and screening efficiency per unit time in discrete element method (DEM) numerical simulations.
Design/methodology/approach
In this paper, a three-dimensional discrete element model of vibrating screen with composite vibration form of swing and translation was proposed to simulate the screening process. In total, 11 kinds of non-spherical particles whose shapes changed in a continuous regularity gradual process were established using a multi-sphere method. In the DEM simulations, vibration parameters, including vibration frequency, vibration amplitude and stroke angle, and swing parameters, including swing frequency and swing angle, were changed to perform parametric studies.
Findings
It shows that the effect of particle shape on screening efficiency is quantitative actually. However, the trends of different shape particles’ screening efficiency per unit time are mainly consistent.
Originality/value
Some simple particle shapes can be expected to be explored to do screening simulation studies reasonably with modification of the simulation data in DEM numerical simulations. That may improve the computational efficiency of numerical simulations and provide guidance to the study of the screening process.
Details
Keywords
The purpose of this paper is to present a full fourth‐order model of the gravity gradient torque of spacecraft around asteroids by taking into consideration of the inertia…
Abstract
Purpose
The purpose of this paper is to present a full fourth‐order model of the gravity gradient torque of spacecraft around asteroids by taking into consideration of the inertia integrals of the spacecraft up to the fourth order, which is an improvement of the previous fourth‐order model of the gravity gradient torque.
Design/methodology/approach
The fourth‐order gravitational potential of the spacecraft is derived based on Taylor expansion. Then the expression of the gravity gradient torque in terms of gravitational potential derivatives is derived. By using the formulation of the gravitational potential, explicit formulations of the full fourth‐order gravity gradient torque are obtained. Then a numerical simulation is carried out to verify the model.
Findings
It is found that the model is more sound and precise than the previous fourth‐order model due to the consideration of higher‐order inertia integrals of the spacecraft. Numerical simulation results show that the motion of the previous fourth‐order model is quite different from the exact motion, while the full fourth‐order model fits the exact motion very well. The full fourth‐order model is precise enough for high‐precision attitude dynamics and control around asteroids.
Practical implications
This high‐precision model is of importance for the future asteroids missions for scientific explorations and near‐Earth objects (NEOs) mitigation.
Originality/value
In comparison with previous models, a gravity gradient torque model around asteroids that is more sound and precise is established. This model is valuable for high‐precision attitude dynamics and control around asteroids.
Details
Keywords
Sowmya G., Gireesha B.J. and Prasannakumara B.C.
The purpose of this paper is to study the thermal behaviour of radial porous fin wetted with nanofluid containing different shaped nanoparticles in the presence of natural…
Abstract
Purpose
The purpose of this paper is to study the thermal behaviour of radial porous fin wetted with nanofluid containing different shaped nanoparticles in the presence of natural convection and radiation. Here, the nanofluid suspended with molybdenum disulfide nanoparticle with base fluid as water is considered. The influence of non-spherical nanoparticles such as platelet, cylinder, brick and blade shapes is also investigated.
Design/methodology/approach
The modeled equations are non-dimensionalized and solved numerically via Runge–Kutta–Fehlberg method combined with shooting scheme.
Findings
The flow natures of the pertinent parameter are represented graphically and discussed their physical significance. From the validation of obtained outcome, it is found that the use nanofluid has significant influence on heat transfer rate. Among platelet, cylinder, brick and blade shapes, brick-shaped nanoparticle shows better heat transfer rate.
Originality/value
The present paper deals with an analysis of the flow of molybdenum disulfide nanoparticles suspended in water over a porous fin of a radial profile. The effect of differently shaped nanoparticles on the heat transfer enhancement through the radial porous fin is investigated for the first time. The natural convection and radiation effects are also considered. The modeled equations are non-dimensionalized and solved numerically via Runge–Kutta–Fehlberg method combined with shooting scheme. The effect of pertinent parameters on temperature field is examined. From the validation of obtained outcome it is found that the use nanofluid has significant influence on heat transfer rate. Among platelet, cylinder, brick and blade shapes, brick-shaped nanoparticle shows better heat transfer rate.
Details
Keywords
Andrew Phillip Grima and Peter Wilhelm Wypych
The purpose of this paper is to examine several calibration techniques that have been developed to determine the discrete element method (DEM) parameters for slow and rapid…
Abstract
Purpose
The purpose of this paper is to examine several calibration techniques that have been developed to determine the discrete element method (DEM) parameters for slow and rapid unconfined flow of granular conical pile formation. This paper also aims to discuss some of the methods currently employed to scale particle properties to reduce computational resources and time to solve large DEM models.
Design/methodology/approach
DEM models have been calibrated against simple bench‐scale experimental results to examine the validity of selected parameters for the contact, material and mechanical models to simulate the dynamic and static behaviour of cohesionless polyethylene pellets. Methods to determine quantifiable single particle parameters such as static friction and the coefficient of restitution have been highlighted. Numerical and experimental granular pile formation has been investigated using different slumping and pouring techniques to examine the dependency of the type of flow mechanism on the DEM parameters.
Findings
The proposed methods can provide cost effective and simple techniques to determine suitable input parameters for DEM models. Rolling friction and particle shape representation has shown to have a significant influence on the bulk flow characteristics via a sensitivity analysis and needs to be accessed based on the environmental conditions.
Originality/value
This paper describes several effective known and novel methodologies to characterise granular materials that are needed to accurately model granular flow using the DEM to provide valuable quantitative data. For the DEM to be a viable predictive tool in industrial applications which often contain huge quantities of particles with random particle shapes and irregular properties, quick and validated techniques to “tune” DEM models are necessary.
Details
Keywords
Ahmad Soleymani and Alireza Toloei
– The purpose of this research was to analyze application effects of the stable frozen orbit conditions in the spacecraft Orbital Maintenance Maneuver (OMM) reduction.
Abstract
Purpose
The purpose of this research was to analyze application effects of the stable frozen orbit conditions in the spacecraft Orbital Maintenance Maneuver (OMM) reduction.
Design/methodology/approach
One challenge in implementing these motions is maintaining the relations as it experiences orbital perturbations (zonal harmonics), most notably due to the non-spherical Earth. A natural phenomenon exists called a frozen orbit, for which the orbital elements: argument of perigee (ω) and eccentricity (e) remain virtually fixed over extended periods of time.
Findings
Simulation results show that, using stable frozen orbit condition results in considerable propellant saving, decreased OMM, increase of accuracy position errors and thus performance improvement of the spacecraft for orbiter mission is preferable. So, from among three proposed theories, the Brouwer–Hori theory has provided better accuracy and more stable conditions in the frozen orbit.
Practical implications
Simulation algorithm has been achieved to solve this problem by extracting and combining the equations that govern the frozen conditions with the tangential forces (ΔV) equations for orbit correction.
Originality/value
In all studies with content of harmonic perturbation effects on the spacecraft motion dynamics, main goal is to obtain a solution for optimization of the operation process, so that overshadowed mission costs. The case studies about this aim, mostly to the trajectory parameters optimization by considering the vehicle orbital conditions under various control methods are formed. While in this regards, the intrinsic properties of stable Earth orbits and using them effectively is less than to analyse the problems is considered.
Details
Keywords
Ahmad Soleymani and Alireza Toloei
The purpose of this paper is to analyze the inclusion effects of the linearized time‐varying J2‐perturbed terms for relative accuracy increase significantly over Melton's problem.
Abstract
Purpose
The purpose of this paper is to analyze the inclusion effects of the linearized time‐varying J2‐perturbed terms for relative accuracy increase significantly over Melton's problem.
Design/methodology/approach
The methodology is based on the previous studies provided by Ross's paper. He gives a set of equations based on the C‐W equations which incorporates the J2 gravitational perturbations and states in his introduction that this method can be expanded for the elliptical reference orbits as described by Melton.
Findings
One challenge in implementing the relative motions is maintaining the relations as it experiences gravitational perturbations, most notably due to non‐spherical Earth. Simulation results show that the inclusion of time‐varying J2 perturbation terms in the derived linear equations increased the accuracy of the solution significantly in the out‐of‐orbit‐plane direction, while the accuracy within the orbit plane remained roughly unchanged.
Practical implications
By reason of replacing approximate terms (e, M) in this solution, for continues accuracy increase of time‐varying parameters containing θ(t) and RO(t), this solution could be useful in the element‐errors evaluation and analysis of orbital multiple rendezvous missions, that are involved to the limited orbit periods.
Originality/value
The originality of this paper is to develop Melton's researches. He provided a method for generalizing the linear equations of motion to an elliptical orbit which enabled the determination of a time‐explicit, approximate solution. In this regard, there is no paper which has evaluated the inclusion effects of the linearized time‐varying J2 perturbation terms over Melton's equations with such an approach.
Details
Keywords
Paul W. Cleary, Raymond C.Z. Cohen, Simon M. Harrison, Matthew D. Sinnott, Mahesh Prakash and Stuart Mead
The purpose of this paper is to show how simulation of the flow of particulates and fluids using discrete element modelling (DEM) and smoothed particle dynamics (SPH) particle…
Abstract
Purpose
The purpose of this paper is to show how simulation of the flow of particulates and fluids using discrete element modelling (DEM) and smoothed particle dynamics (SPH) particle methods, offer opportunities for better understanding the dynamics of flow processes.
Design/methodology/approach
DEM and SPH methods are demonstrated in a broad range of computationally‐demanding applications including comminution, biomedical, geophysical extreme flow events (risk/disaster modelling), eating of food by humans and elite water‐based sports.
Findings
DEM is ideally suited to predicting industrial and geophysical applications where collisions between particles are the dominant physics. SPH is highly suited to multi‐physics fluid flow applications in industrial, biophysical and geophysical applications. The advantages and disadvantages of these particle methods are discussed.
Research limitations/implications
Research results are limited by the numerical resolution that can currently be afforded.
Practical implications
The paper demonstrates the use of particle‐based computational methods in a series of high value applications. Enterprises that share interests in these applications will benefit in their product and service development by adopting these methods.
Social implications
The ability to model disasters provides governments and companies with the opportunity and obligation to use these to render knowable disasters which were previously considered unknowable. The ability to predict the breakdown of food during eating opens up opportunities for the design of superior performing foods with lower salt, sugar and fat that can directly contribute to improved health outcomes and can influence government food regulatory policy.
Originality/value
The paper extends the scale and range of modelling of particle methods for demanding leading‐edge problems, of practical interest in engineering and applied sciences.
Details