Search results

This paper aims to improve calibration and force measurement accuracy of multi-sensors’ piezoelectric dynamometer used in thrust measurement of rocket/air vehicle engine.

This paper presents a mapping solution method of sensors’ outputs based on the Kirchhoff thin plate theory, builds force-deformation differential equations with specific boundary conditions, uses finite difference (FD) method to solve the equations and analyzes outputs in offset loading forces in four-sensor square layout in main direction. The resultant force deviations calculated by the Kirchhoff theory are optimized with sequence quadratic program (SQP) method, and a calibration method of multiple loading points (MLP) based on the Kirchhoff theory is presented. Experiments of static calibration and verification are complemented to contrast the novel and single loading point (SLP) calibration method.

Experiments of static calibration and its verification show that at a loading force of 5,000N, the average resultant force deviations with MLP is 17.87N (0.35% FS) compared with single loading point method 26.45N (0.53% FS), improving calibration and measurement precision.

A novel calibration method with MLP is presented. Force distributions of multiple sensors of main direction in piezoelectric dynamometer with offset loading force are solved with the Kirchhoff theory. The resultant force deviations calculated by Kirchhoff theory are optimized with the SQP method.

The purpose of this paper is to solve the problem that the relationship between loading forces, which were applied at different positions on a plane, and output values of load-sharing dynamometer is non-linear.

First, the analytical model of ISPM (isodynamic surface proportional mapping method) method, which is used to calibrate dynamometer, was established. Then, a series of axial force calibration tests were performed on a load-sharing dynamometer at different loading positions. Finally, according to output values, calibration forces at different loading positions were calculated by ISPM method, and corresponding distribution histogram of calibration force error was generated.

The largest error between calculated force and standard force is 2.92 per cent, and the probability of calculated force error within 1 per cent is 91.03 per cent, which verify that the ISPM method is reliable for non-linear calibration of dynamometers.

The proposed ISPM method can achieve non-linear calibration between measured force and output signal of load-sharing dynamometer at different positions. In addition, ISPM method can also solve some complex non-linear problems, such as prediction of plane cutting force under the influence of multiple parameters, the force measurement of multi-degree-of-freedom platform and so on.

Torque is one of the main loads acting on the aircraft wing, the horizontal tail and the vertical tail. In flight load measurement, due to the significant influence of the bending moment and the shear force on the strain gauge, the accuracy of torque measurement is usually low. Therefore, aircraft torque measurement is difficult. Based on the characteristics of a certain type of horizontal tail, a measurement method for the torque with high accuracy was proposed in this paper.

A new simplified torque measurement method for the all-moving horizontal tail was proposed based on the spiral driver. The feasibility of the method and key points of the tests were analyzed and studied through a virtual load calibration test.

Based on the results of the real load calibration test, the torque load equation with high accuracy was established, and the torque measurement was achieved in load flight tests.

However, the proposed method is based on the structure of the spiral driver. If there is generally no spiral driver at the aircraft wings and vertical tails, then the appropriate torque measurement method needs to be derived according to the specific object.

The research in this paper provides a new idea for the torque measurement of aircraft structures, which can be used for the torque measurement of subsequent aircraft types.

Examines the many innovative smart card applications covering areas such as telecommunications, transport, banking, healthcare and employee/membership schemes. Looks at how the banks, financial services firms, information companies and card issuers are gradually reconceptualizing their delivery strategy as well as their businesses to meet the growing need for remote delivery, brand equity and differentiation. Says that smart cards could act as payment vehicles, access keys, information managers, marketing tools and customized delivery systems. Explores possibilities of an electronic purse range from a disposable stored value card to a re‐loadable stored value card which could literally replace low‐value cash transactions. Smart cards would then become integral to the banks’ concept of remote delivery systems in the future, because smart cards are not just a product, they are a new delivery system. Focuses on some of the issues that might be of deeper concern to banks. Suggests a collaboration between banks and providers in the mass introduction of smart cards.

The aim of this paper is to develop a new method for finding multiple bifurcation points in structures.

A brief review of nonlinear analysis is presented. A powerful method (called arc‐length) for tracing nonlinear equilibrium path is described. Techniques for monitoring critical points are discussed to find the rank deficiency of the stiffness matrix. Finally, by using eigenvalue perturbation of tangent stiffness matrix, load parameter associated with multiple bifurcation points is obtained.

Since other methods of finding simple bifurcation points diverge in the neighborhood of critical points, this paper introduces a new method to find multiple bifurcation points. It should be remembered that a simple bifurcation point is a multiple bifurcation point with rank deficiency equal to one. Therefore, the method is applicable to simple critical points as well.

Global buckling of the structures should be considered in design. Many structures (specially symmetric space structures) have multiple bifurcation points, therefore, analyst and designer should be aware of these points and should control them (for example, by changing the geometry or other related factors) for obtaining a safe and optimum design.

In this paper a robust method to find multiple bifurcation points is introduced. By using this method, engineers can be aware of critical load of multiple bifurcation points to control global buckling of related structures.

The structural design problem can be viewed as an iterative design loop with each iteration involving two stages for topology and shape designs with genetic algorithm (GA) as the optimization tool for both.

The topology optimization problem, which is ill posed, is regularized using a constraint on perimeter and solved using GA. The problem is formulated as one of compliance minimization subject to volume constraint for the single loading case. A dual formulation of this has been used for the multiple loading cases resulting in as many behavioral constraints as there are loading cases. The tentative topology given by the topology optimization module is taken and the domain boundary is approximated using straight lines, B‐splines and cubic spline curves and design variables are selected among the boundary defining points. Optimum boundary shape of the problem has been obtained using GA in two different ways: without stress constraints; and with stress constraints.

The proposed two stage strategy has been tested on benchmark structural optimization problems and its performance is found to be extremely good.

The strategy appears to be eminently suitable for implementation in a general purpose FE software as an add‐on module for structural design optimization.

It has been observed that the integrated topology and shape design method is robust and easy to implement in comparison with other techniques. The computing time requirements for the GA does not appear daunting in the present scenario of high performance parallel computing and improved GA techniques.

The aim of this paper is to present a novel multifactor structural optimisation method incorporating reliability performance.

This research addresses structural optimisation problems in which the design is required to satisfy multiple performance criteria, such as strength, stiffness, mass and reliability under multiple loading cases simultaneously. A MOST technique is extended to accommodate the reliability‐related optimisation. Structural responses and geometrical sensitivities are analysed by a FE method, and reliability performance is calculated by a reliability loading‐case index (RLI). The evaluation indices of performances and loading cases are formulated, and an overall performance index is presented to quantitatively evaluate a design.

The proposed method is applicable to multi‐objective, multi‐loading‐case, multi‐disciplinary and reliability‐related optimisation problems. The applications to a star‐like truss structure and a raised‐access floor panel structure confirmed that the method is highly effective and efficient in terms of structural optimisation.

A systematic method is proposed. The optimisation method combines the MOST technique with a RLI (a new alternative route to calculate the reliability index at multiple loading cases) using a parametric FE model.

Information and communications technology (ICT) offers enormous opportunities for individuals, businesses and society. The application of ICT is equally important to economic and non-economic activities. Researchers have increasingly focused on the adoption and use of ICT by small and medium enterprises (SMEs) as the economic development of a country is largely dependent on them. Following the success of ICT utilisation in SMEs in developed countries, many developing countries are looking to utilise the potential of the technology to develop SMEs. Past studies have shown that the contribution of ICT to the performance of SMEs is not clear and certain. Thus, it is crucial to determine the effectiveness of ICT in generating firm performance since this has implications for SMEs’ expenditure on the technology. This research examines the diffusion of ICT among SMEs with respect to the typical stages from innovation adoption to post-adoption, by analysing the actual usage of ICT and value creation. The mediating effects of integration and utilisation on SME performance are also studied. Grounded in the innovation diffusion literature, institutional theory and resource-based theory, this study has developed a comprehensive integrated research model focused on the research objectives. Following a positivist research paradigm, this study employs a mixed-method research approach. A preliminary conceptual framework is developed through an extensive literature review and is refined by results from an in-depth field study. During the field study, a total of 11 SME owners or decision-makers were interviewed. The recorded interviews were transcribed and analysed using NVivo 10 to refine the model to develop the research hypotheses. The final research model is composed of 30 first-order and five higher-order constructs which involve both reflective and formative measures. Partial least squares-based structural equation modelling (PLS-SEM) is employed to test the theoretical model with a cross-sectional data set of 282 SMEs in Bangladesh. Survey data were collected using a structured questionnaire issued to SMEs selected by applying a stratified random sampling technique. The structural equation modelling utilises a two-step procedure of data analysis. Prior to estimating the structural model, the measurement model is examined for construct validity of the study variables (i.e. convergent and discriminant validity).

The estimates show cognitive evaluation as an important antecedent for expectation which is shaped primarily by the entrepreneurs’ beliefs (perception) and also influenced by the owners’ innovativeness and culture. Culture further influences expectation. The study finds that facilitating condition, environmental pressure and country readiness are important antecedents of expectation and ICT use. The results also reveal that integration and the degree of ICT utilisation significantly affect SMEs’ performance. Surprisingly, the findings do not reveal any significant impact of ICT usage on performance which apparently suggests the possibility of the ICT productivity paradox. However, the analysis finally proves the non-existence of the paradox by demonstrating the mediating role of ICT integration and degree of utilisation explain the influence of information technology (IT) usage on firm performance which is consistent with the resource-based theory. The results suggest that the use of ICT can enhance SMEs’ performance if the technology is integrated and properly utilised. SME owners or managers, interested stakeholders and policy makers may follow the study’s outcomes and focus on ICT integration and degree of utilisation with a view to attaining superior organisational performance.

This study urges concerned business enterprises and government to look at the environmental and cultural factors with a view to achieving ICT usage success in terms of enhanced firm performance. In particular, improving organisational practices and procedures by eliminating the traditional power distance inside organisations and implementing necessary rules and regulations are important actions for managing environmental and cultural uncertainties. The application of a Bengali user interface may help to ensure the productivity of ICT use by SMEs in Bangladesh. Establishing a favourable national technology infrastructure and legal environment may contribute positively to improving the overall situation. This study also suggests some changes and modifications in the country’s existing policies and strategies. The government and policy makers should undertake mass promotional programs to disseminate information about the various uses of computers and their contribution in developing better organisational performance. Organising specialised training programs for SME capacity building may succeed in attaining the motivation for SMEs to use ICT. Ensuring easy access to the technology by providing loans, grants and subsidies is important. Various stakeholders, partners and related organisations should come forward to support government policies and priorities in order to ensure the productive use of ICT among SMEs which finally will help to foster Bangladesh’s economic development.

This study proposes targeted modernization of the Department of Defense (DoD's) Joint Forces Ammunition Logistics information system by implementing the optimized innovative information technology open architecture design and integrating Radio Frequency Identification Device data technologies and real-time optimization and control mechanisms as the critical technology components of the solution. The innovative information technology, which pursues the focused logistics, will be deployed in 36 months at the estimated cost of $568 million in constant dollars. We estimate that the Systems, Applications, Products (SAP)-based enterprise integration solution that the Army currently pursues will cost another $1.5 billion through the year 2014; however, it is unlikely to deliver the intended technical capabilities.

The purpose of this paper is to determine optimal pooling strategies from the perspective of an insurer's shareholders underlying a default probability driven premium loading and convex price-demand functions.

The authors use an option pricing framework for normally distributed claims to analyze the net present value for different pooling strategies and contrast multiple risk pools structured as a single legal entity with the case of multiple legal entities. To achieve the net present value maximizing default probability, the insurer adjusts the underlying equity capital.

The authors show with the theoretical considerations and numerical examples that multiple risk pools with multiple legal entities are optimal if the equity capital must be decreased. An equity capital increase implies that multiple risk pools in a single legal entity are generally optimal. Moreover, a single risk pool for multiple risk classes improves in relation to multiple risk pools with multiple legal entities whenever the standard deviation of the underlying claims increases.

The authors extend previous research on risk pooling by introducing a default probability driven premium loading and a relation between the premium level and demand through a convex price-demand function.