Search results

Prior research has emphasised the importance of the early phases of construction projects, as well as the difficulties of procuring engineering services – especially due to the uncertainties. Despite that, studies on the public procurement of engineering services are scarce. Although scholars have shown that uncertainty may affect the choice of control modes, the level of uncertainty that characterises services is not addressed by the two task characteristics: knowledge of the transformation process and output measurability. The purpose is to investigate organisational control in public procurement of engineering services.

The existing control model was adjusted in this study by conceptually adding uncertainty as a third aspect to the two task characteristics. A single case study of the Swedish Transport Administration was used. The empirical data, comprising 14 interviews with managers from the client and engineering consulting companies, were analysed using flexible pattern matching and visual mapping approaches and then illustrated using the model.

The public client did not base its choice of control modes on uncertainty, but rather on the other two task characteristics. Consequently, the service providers argued that the chosen control modes reduced their creativity, increased their financial risks and caused unclear responsibilities. This study therefore shows that uncertainty is an important factor to consider in the choice of control modes, both from a theoretical perspective and from the service providers' point of view. The developed model may therefore be useful for researchers as well as practitioners.

This study is the first attempt to add uncertainty as a task characteristic when choosing control modes. The results contribute to the scarce control literature regarding the procurement of engineering services for construction projects and the procurement of other services with high uncertainty.

This paper aims to study the issues of adaptive fuzzy control for a category of switched under-actuated systems with input nonlinearities and external disturbances.

A control scheme based on sliding mode surface with a hierarchical structure is introduced to enhance the responsiveness and robustness of the studied systems. An equivalent control and switching control rules are co-designed in a hierarchical sliding mode control (HSMC) framework to ensure that the system state reaches a given sliding surface and remains sliding on the surface, finally stabilizing at the equilibrium point. Besides, the input nonlinearities consist of non-symmetric saturation and dead-zone, which are estimated by an unknown bounded function and a known affine function.

Based on fuzzy logic systems and the hierarchical sliding mode control method, an adaptive fuzzy control method for uncertain switched under-actuated systems is put forward.

The “cause and effect” problems often existing in conventional backstepping designs can be prevented. Furthermore, the presented adaptive laws can eliminate the influence of external disturbances and approximation errors. Besides, in contrast to arbitrary switching strategies, the authors consider a switching rule with average dwell time, which resolves control problems that cannot be resolved with arbitrary switching signals and reduces conservatism.

This paper aims to present a sliding mode control method based on disturbance observer (DO) for improving the reaching law of permanent magnet synchronous motor (PMSM).

Aiming at the insufficiency of the traditional exponential reaching law used in sliding mode variable structure control, an exponential reaching law related to the speed error is proposed. The improved exponential reaching law can adaptively adjust the size of the constant velocity term in the reaching law according to the size of the speed error, so as to adaptively adjust the speed of the system approaching the sliding mode surface to overcome the control deviation and improve the dynamic and steady state performance. To improve the anti-interference ability of the system, a DO is proposed to observe the external disturbance of the system, and the observed value is used to compensate the system. The stability of the system is analyzed by Lyapunov theorem. The effectiveness of this method is proved by simulation and experiment.

Simulation and experiment show that the proposed method has the advantages of fast response and strong anti-interference ability.

The proposed method cannot observe the disturbance caused by the change of internal parameters of the system.

A sliding mode control method for PMSM is proposed, which has good control performance. The proposed method can effectively suppress chattering, ensure fast response speed and have strong anti-interference ability. The effectiveness of the algorithm is verified by simulation and experiment.

This paper aims to clarify voltage sourced converter’s (VSC’s) influence rules on the alternating current (AC) short-circuit current and identify the key factors, so as to propose the short-circuit current suppression strategy.

This paper investigates the key factors which impact the short-circuit current supplied by the VSC based on the equivalent current source model. This study shows that the phase of the VSC equivalent current source is mainly affected by the type of fault, whereas the amplitude is mainly decided by the control mode, the amplitude limiter and the electrical distance. Based on the above influence mechanism, the dynamic limiter with short-circuit current limiting function is designed. The theoretical analysis is verified by simulations on PSCAD.

The short-circuit current feeding from VSC is closely related to the control mode and control parameters of the VSC, fault type at AC side and the electrical distance of the fault point. The proposed dynamic limiter can make VSC absorb more reactive power to suppress the short-circuit current.

The dynamic limiter proposed in this paper is limited to suppress three-phase short-circuit fault current. The future work will focus more on improving and extending the dynamic limiter to the fault current suppression application in other fault scenarios.

The research results provide a reference for the design of protection system.

The key influence factors are conducive to put forward the measures to suppress the fault current, eliminate the risk of short-circuit current exceeding the standard and reduce the difficulty of protection design.

Five-level rectifiers have received widespread attention because of their excellent performance in high-voltage and high-power applications. Taking a five-level rectifier with only four-IGBT for this study, a sliding mode predictive control (SMPC) algorithm is proposed to solve the problem of poor dynamic performance and poor anti-disturbance ability under the traditional model predictive control with the PI outer loop.

First, mathematical models under the two-phase stationary coordinate system and two-phase synchronous rotating coordinate system are established. Then, the design of the outer-loop sliding mode controller is completed by establishing the sliding mode surface and design approach rate. The design of the inner-loop model predictive controller was completed by discretizing the mathematical model equations. The modulation part uses a space vector modulation technique to generate the PWM wave.

The sliding mode predictive control strategy is compared with the control strategy with a PI outer loop and a model predictive inner loop. The proposed control strategy has a faster dynamic response and stronger anti-interference ability.

For the five-level rectifier, the advantages of fast dynamic influence and parameter insensitivity of sliding mode control are used in the voltage outer loop to replace the traditional PI control, and which is integrated with the model predictive control used in the current inner loop to form a novel control strategy with a faster dynamic response and stronger immunity to disturbances. This novel strategy is called sliding mode predictive control (SMC).

The purpose of this paper is to propose a novel event-triggered aperiodic intermittent sliding-mode control (ETAI-SMC) algorithm for master–slave bilateral teleoperation robotic systems to further save communication resources while maintaining synchronization precision.

By using the Lyapunov theory, a new event-triggered aperiodic intermittent sliding-mode controller is designed to synchronize master–slave robots in a discontinuous method. Unlike traditional periodic time-triggered continuous control strategy, a new ETAI condition is discussed for less communication pressure. Then, the exponential reaching law is adopted to accelerate sliding-mode variables convergence, which has a significant effect on synchronization performance. In addition, the authors use quantizers to make their algorithm have obvious progress in saving communication resources.

The proposed control algorithm performance is validated by an experiment developed on a practical bilateral teleoperation system with two PHANToM Omni robotic devices. As a result, the synchronization error is limited within a small range and the control frequency is evidently reduced. Compared with a conventional control algorithm, the experimental results illustrate that the proposed control algorithm is more sensitive to system states changes and it can further save communication resources while guaranteeing the system synchronization accuracy, which is more practical for real bilateral teleoperation robotic systems.

A novel ETAI-SMC for bilateral teleoperation robotic systems is proposed to find a balance between reducing the control frequency and synchronization control precision. Combining the traditional sliding-mode control algorithm with the periodic intermittent control strategy and the event-triggered control strategy has produced obvious effect on our control performance. The proposed ETAI-SMC algorithm helps the controller be more sensitive to system states changes, which makes it possible to achieve precise control with lower control frequency. Moreover, we design an environment contact force feedback algorithm for operators to improve the perception of the slave robot working environment. In addition, quantizers and the exponential convergence law are adopted to help the proposed algorithm perform better in saving communication resources and improving synchronization precision.

In times of open and distributed innovation, many innovation activities that are important for firms' products and services take place beyond the boundaries of the firm and thus beyond firms' direct control. A prime example for this phenomenon is open source software (OSS) development, where multiple actors contribute to a public good, which is also integrated into company-owned software products. Despite the importance of aligning community work on the public good with own in-house development efforts, firms have limited options to directly control the OSS project or the project's outcome. This research reflects on resource deployment control, a control mode in which firms assign own developers to work for an OSS project to influence the OSS project, and tests hypotheses on individual developer levels.

This research tests the effect of perceived resource deployment control on opinion leadership by analyzing employed Linux kernel developers.

The findings show that developers who perceive being assigned to an OSS project to enact control also exhibit opinion leadership. This research also investigates boundary conditions such as the OSS business model a firm operates and the reputation developers assign to the developers' employer.

This research is the first that is devoted to resource deployment control, and the research closes with a discussion of implications for control theory and the management of innovation beyond firm boundaries.

Accurate glide path tracking is vital to the automatic carrier landing task of unmanned aerial vehicle (UAV). The purpose of this paper is to develop a reliable flight controller that can simultaneously deal with external disturbance, structure fault and actuator fault.

The automatic carrier landing task is resolved into the glide path tracking problem and attitude tracking problem. The disturbance observer-based adaptive sliding mode control scheme is proposed for system stabilization, disturbance rejection and fault tolerance.

Both the Lyapunov method and exemplary simulations can prove that the disturbance estimation error and the attitude tracking error converge in finite time in the presence of external disturbances and various faults.

The presented algorithm is testified by a UAV automatic carrier landing simulation, which shows the potential of practical usage.

The barrier function is introduced to adaptively update both the sliding mode observer gain and sliding mode controller gain, so that the sliding mode surface could converge to a predefined region without overestimation. The proposed flight controller ensures a secure carrier landing task.

The purpose of this paper is to implement a closed loop regulated bidirectional DC to DC converter for an application in the electric power system of more electric aircraft. To provide a consistent power supply to all of the electronic loads in an aircraft at the desired voltage level, good efficiency and desired transient and steady-state response, a smart and affordable DC to DC converter architecture in closed loop mode is being designed and implemented.

The aircraft electric power system (EPS) uses a bidirectional half-bridge DC to DC converter to facilitate the electric power flow from the primary power source – an AC generator installed on the aircraft engine’s shaft – to the load as well as from the secondary power source – a lithium ion battery – to the load. Rechargeable lithium ion batteries are used because they allow the primary power source to continue recharging them whenever the aircraft engine is running smoothly and because, in the event that the aircraft engine becomes overloaded during takeoff or turbulence, the charged secondary power source can step in and supply the load.

A novel nonsingular terminal sliding mode voltage controller based on exponential reaching law is used to keep the load voltage constant under any of the aforementioned circumstances, and its performance is contrasted with a tuned PI controller on the basis of their respective transient and steady-state responses. The former gives a faster and better transient and steady-state response as compared to the latter.

This research gives a novel control scheme for incorporating an auxiliary power source, i.e. rechargeable battery, in more electric aircraft EPS. The battery is so implemented that it can get regeneratively charged when primary power supply is capable of handling an additional load, i.e. the battery. The charging and discharging of the battery is carried out in closed loop mode to ensure constant battery terminal voltage, constant battery current and constant load voltage as per the requirement. A novel sliding mode controller is used to improve transient and steady-state response of the system.

This paper aims to propose a novel system design and control algorithm of lower limb exoskeleton, which provides walking assistance and load sharing for the wearer.

In this paper, the valve-controlled asymmetrical hydraulic cylinder is selected for driving the hip and knee joint of exoskeleton. Pressure shoe is developed that purpose on detecting changes in plantar force, and a fuzzy recognition algorithm using plantar pressure is proposed. Dynamic model of the exoskeleton is established, and the sliding mode control is developed to implement the position tracking of exoskeleton. A series of prototype experiments including benchtop test, full assistance, partial assistance and loaded walking experiments are set up to verify the tracking performance and power-assisted effect of the proposed exoskeleton.

The control performance of PID control and sliding mode control are compared. The experimental data shows the tracking trajectories and tracking errors of sliding mode control and demonstrate its good robustness to nonlinearities. sEMG of the gastrocnemius muscle tends to be significantly weakened during assisted walking.

In this paper, a structure that the knee joint and hip joint driven by the valve-controlled asymmetrical cylinder is used to provide walking assistance for the wearer. The sliding mode control is proposed to deal with the nonlinearities during joint rotation and fluids. It shows great robustness and frequency adaptability through experiments under different motion frequencies and assistance modes. The design and control method of exoskeleton is a good attempt, which takes positive impacts on the productivity or quality of the life of wearers.