Search results

This paper aims to systematically analyze the weaknesses of public procurement in Malaysia as reported in the Auditor General’s Reports from 2011 until 2018. Specifically, the study examines the types of weaknesses, the modes of public procurement involved with the weaknesses, the procurement categories involved with the weaknesses and the key recommendations to mitigate the weaknesses in public procurement.

A document analysis was adopted in achieving the objective. The Auditor General’s reports and the reports of activities of federal ministries/departments published by the National Audit Department, Malaysia from the year 2011 until 2018 are the main documents used in this study. The data gathered were analyzed using frequency distribution and displayed with descriptive statistics and relevant graphs.

The findings of the study revealed that the top five reported are non-compliance to scope, specifications and terms of contracts; delayed completion/non-completion of project; poor documentation; low quality of products, service and work; and little or no prior planning. It is also found that direct negotiation mode was reported with the highest issues of public procurement, while the procurement mode with the least public procurement weaknesses is direct purchase. Moreover, it was found that work category is the highest with public procurement issues reported compared to supplies and services. The top recommendations given by the Auditor General were to improve internal control, to enhance monitoring, to establish planning in details, to improve assets management and to take appropriate actions toward contractors and procurement officers when needed.

This is among a few studies that attempted to systematically examine the main issues regarding the public procurement activities in Malaysia. This study highlighted pertinent aspects of the public procurement activities, which need close attention by the relevant authorities to ensure efficient and effective public procurement.

The authors explore the under-researched area of post-decision evaluation in PPPs (public–private partnerships), focusing upon how and whether Post-decision Project Evaluation (PdPE) is considered and provided for in United Kingdom (UK) public infrastructure projects.

The authors’ research design sought insights from overviewing UK PPP planning and more focused exploration of PPP operational practice. The authors combine the extensive analysis of planning documents for operational UK PPP projects with interviews of different stakeholders in PPP projects in one city. Mobilising an open critical perspective, documents were analysed using ethnographic content analysis (ECA) and interviews were analysed using thematic analysis consistent therewith. The authors theorise the absence and ambiguities of PdPE drawing on the sociology of ignorance.

The authors find a long-standing absence and lack of PdPE in PPP projects throughout planning and operational practice, reflecting a dynamic, multi-faceted ignorance. Concerning planning practice, the authors’ documentary analysis evidences a trend in PdPE from its absence in the early years (which may indicate some natural or genuine ignorance) to different levels or forms of weak inclusion later. Regarding this inclusion, the authors find strategic ignorance played a substantive role, involving “deliberate engineering” by both public sector and private partners. Interview findings indicate lack of clarity over PdPE and its under-development in PPP practice, deficiencies again suggestive of natural and strategic ignorance.

The authors draw from the sociology of ignorance vis-à-vis accounting's absence and ambiguity in the context of PPP, contributing to an under-researched area.

The present article aims to determine the factors that explain the intention to adopt electronic commerce among women traders in a developing country like Democratic Republic of Congo (DRC) during a health crisis period.

This study was conducted in the DRC, in Bukavu Town. A convenience sample of 282 respondents consisting of solely women entrepreneurs (importing traders) in Bukavu Town was selected and the structural equation model was used to test the research hypotheses resulted from Ajzen's theory of planned behaviour.

The finding results showed that only the factors attitude towards electronic commerce adoption and subjective norms which predict women traders' intention to adopt electronic commerce. The analysis shows that about 38.9% of the variation in the dependent variable is explained by the above variables.

Few studies have presented technology and electronic commerce adoption as resilience of women entrepreneurs in a time of crisis, despite the abundance of the review literature on adoption. This study provides a new approach to assist women entrepreneurs as well as researchers in understanding the drivers of electronic commerce adoption factors in the DRC.

Promoting technological innovation is important to address the complexity of major engineering challenges. Technological innovations include short-term innovations at the project level and long-term innovations that can enhance competitive advantages. The purpose of this study is to develop an incentive mechanism for the public sector that considers short-term and long-term efforts from the private sector, aiming to promote technological innovation in major engineering projects.

This study constructs an incentive model considering the differences in short-term and long-term innovation efforts from the private sector. This model emphasizes the spillover effect of long-term efforts on current projects and the cost synergy effect between short-term and long-term efforts. It also explores the factors influencing the optimal incentive strategies for the public sector and innovation strategies for the private sector.

The results indicate that increasing the output coefficient of short-term and long-term efforts and reducing the cost coefficient not only enhance the innovation efforts of the private sector but also prompt the public sector to increase the incentive coefficient. The spillover effect of long-term innovation efforts and the synergy effect of the two efforts are positively related to the incentive coefficient for the public sector.

This research addresses the existing gap in understanding how the public sector should devise incentive mechanisms for technological innovation when contractors acting as the private sector are responsible for construction within a public-private partnership (PPP) model. In constructing the incentive mechanism model, this study incorporates the private sector's short-term efforts at the project level and their long-term efforts for sustained corporate development, thus adding considerable practical significance.

Prior research has emphasised the importance of the early phases of construction projects, as well as the difficulties of procuring engineering services – especially due to the uncertainties. Despite that, studies on the public procurement of engineering services are scarce. Although scholars have shown that uncertainty may affect the choice of control modes, the level of uncertainty that characterises services is not addressed by the two task characteristics: knowledge of the transformation process and output measurability. The purpose is to investigate organisational control in public procurement of engineering services.

The existing control model was adjusted in this study by conceptually adding uncertainty as a third aspect to the two task characteristics. A single case study of the Swedish Transport Administration was used. The empirical data, comprising 14 interviews with managers from the client and engineering consulting companies, were analysed using flexible pattern matching and visual mapping approaches and then illustrated using the model.

The public client did not base its choice of control modes on uncertainty, but rather on the other two task characteristics. Consequently, the service providers argued that the chosen control modes reduced their creativity, increased their financial risks and caused unclear responsibilities. This study therefore shows that uncertainty is an important factor to consider in the choice of control modes, both from a theoretical perspective and from the service providers' point of view. The developed model may therefore be useful for researchers as well as practitioners.

This study is the first attempt to add uncertainty as a task characteristic when choosing control modes. The results contribute to the scarce control literature regarding the procurement of engineering services for construction projects and the procurement of other services with high uncertainty.

This study aims to analyze the effects of cultural orientations (performance and sociality) on the trajectories of innovation inputs and their results in different countries worldwide between 2011 and 2021.

As a technique for data analysis, one of the spatial Bayesian models and Gray forecasting methods is used. This technique is adequate to achieve the objectives of the investigation because it allows analyzing how the variables move in time ranges and allow the generation of forecasts. This model also allows knowing if there are spills, which investing in a country can positively affect countries with geographical proximity. The databases used were the Global Innovation Index with data from 131 nations and the Globe Project with data from 157 countries between 2011 and 2021. The variables analyzed are institutions, human capital, research infrastructure, market sophistication and business sophistication. On the other hand, regarding moderations of cultural orientations, The Globe Project developed two factors: performance orientation (high degree of masculinity, avoidance of ambiguity, power distance and future orientation) and humane orientation (high-level of femininity, institutional and societal collectivism).

The results reveal that all inputs grow at different rates over time. In the case of institutions, it is the most difficult to generate changes over time. However, human capital, market sophistication and business sophistication are the ones that have grown the most over time, regardless of the country’s cultural orientation.

Among the main limitations is the set of data used because it only considers one approach to culture, especially the one considered by Hofstede. However, other approaches could help evaluate the results of this research. Considering the results obtained, the study attempts to provide a different view of the effects of cultural variables on companies’ innovation performance in different countries in the world. In the same way, evaluating these effects allows firms to consider variables associated with the country that will affect the strategies and performance of the firm.

The results achieved make it possible to strengthen the analysis of the countries’ strategies when it comes to innovation, especially in the permanent evaluation of the results that allow to encourage changes in the execution of innovative activities to maintain their performance over time.

The contributions allow us to understand the dynamics of innovation in the knowledge and creative outputs of countries over time.

The trajectory analysis used in the data analysis is perhaps one of the most robust techniques that makes a time series analysis. This allows identifying trajectories for the independent variables of the study and their influence on the innovation of the country.

This paper investigates the effect of state-society relations on the industrially-related growth paths of developed countries.

It introduces a novel theoretical framework, the state-business-labor relations (SBLR) framework, where four main actors are identified: the state, big businesspersons or tycoons, owners and managers of small and medium enterprises (SMEs) or Entrepreneurs and labor. Different SBLR categories or modes are introduced depending on levels of coordination and power relations between the studied actors. The paper then investigates how these SBLR modes, through adopting various policies targeting the industrial sector, lead to different growth paths. Rather than focusing only on economic growth, this research regards a growth path as a matrix of the performance in long-run growth and equality of distribution.

Using regression analysis and statistical data, the results suggest that the Co-Balanced mode, having higher levels of coordination and lower favoritism, leads to the best growth path among the four introduced modes, especially with its emphasis on high levels of venture capital availability and easiness of starting business. while the Lib-Capture mode, characterized by lower coordination and higher favoritism, seems to have the worst growth path and the best implemented policy for this mode is suggested to be high profit taxes that seem to counter the negative impact of the existing high levels of favoritism.

Despite the important findings that this research has reached, this paper is mainly meant to open a further investigation into this topic and open this dimension that the research on VoC and political economy have under-researched. A deeper investigation of SBLR typologies that could only be possible by having richer datasets with more data on coordination for the whole world, rather than only the advanced economies, would further our understanding of the dynamics that shape the growth paths of different countries of the world.

To realize the best industrial growth path, fighting favoritism should be an important objective. The negative impact of favoritism on innovation could not be disregarded in the eve of the fourth industrial revolution, where innovation is increasingly pivotal to future industrial development. Actively engaging societal groups in the policymaking process is important in addressing their concerns and balancing them at the same time. This should lead to the double benefit of formulating better policies that should foster growth as well as provide better distribution of this growth. High levels of coordination should help in realizing this objective. Yet, this could only be possible if societal groups are free to associate and aggregate their power and when there are means of preventing one actor from gaining more favorite treatment and exclusive influence over policymakers. The presence of both powerful and broadly represented business associations and labor unions and the existence of a government interested in coordinating their efforts-rather than letting itself be controlled by one group at the expense of the others-should help in the realization of the best growth path. Thus, institutional reform that empowers societal groups and enables them to defend their interests as well as fights all forms of corruption should lead to the realization of a more prosperous and equitable industrial development, with the “re-industrialization” of the developed world being no exception. The technological and social challenges of intensive automation and digitalization accompanying the fourth industrial revolution make the envisaged institutional reform more urgent.

This paper is introducing a novel theoretical framework for studying the effect of state-society relations, particularly SBLR, on the industrial growth paths of developed countries. It integrates three important bodies of literature in order to build a more comprehensive understanding of the dynamics of state-society relations and their economic consequences. These are the Varieties of Capitalism (VoC), State-Business Relations (SBR) and Industrial Relations. The SBLR framework differentiates between tycoons and entrepreneurs, an important distinction that often goes unnoticed. Different SBLR categories or modes are introduced, depending on levels of coordination and power relations between the actors. It is proposed in this research that the effect on growth paths goes beyond the simple dichotomy between CMEs and LMEs usually present in the literature of VoC and that power relations provide an essential complementary dimension in explaining this causality.

Motivated by the wide application of procurement strategies in retailing, this paper aims to examine the effect of procurement strategies on decisions and profits and strategic inventory (SI) is considered.

The game-theoretic models are developed under a two-period fresh product supply chain (FSC), and consist of the mode of purchasing products only in the first period without SI (Scenario S), the mode of purchasing products in every period without SI (Scenario T) and the mode of purchasing products in every period with SI (Scenario TS).

Conducting the calculating and comparing, some major findings can be concluded. In general, two-period purchasing strategies (Scenarios T and TS) promote a higher freshness-keeping effort than the single buying strategy (Scenario S). Regarding the pricing strategy, SI and Scenario S can both contribute to obtaining a lower wholesale price, the retailer's pricing is relatively complicated and hinges on the consumer's sensitivity to freshness-keeping effort and the holding cost. Besides, comparing the sales quantity and the profit, the authors find that Scenario TS stimulates more demands and brings more profits for the manufacturer. However, Scenario TS is not the optimal selection for the reason that SI sometimes hurts the retailer and even the whole supply chain. Whereas, when the holding cost is in a certain range, Scenario TS will lead to a win-win situation.

The main findings of this study can give the enterprises some advice on the procurement strategies of fresh products and the decisions of pricing and the freshness-keeping effort.

A deteriorating security situation and an increased need for defence equipment calls for new forms of collaboration between Armed Forces and the defence industry. This paper aims to investigate the ways in which the accelerating demand for increased security of supply of equipment and supplies to the Armed Forces requires adaptability in the procurement process that is governed by laws on public procurement (PP).

This paper is based on a review of current literature as well as empirical data obtained through interviews with representatives from the Swedish Defence Materiel Administration and the Swedish defence industry.

Collaboration with the globalized defence industry requires new approaches, where the PP rules make procurement of a safe supply of defence equipment difficult.

The study's empirical data and findings are based on the Swedish context. In order to draw more general conclusions in a defence context, the study should be expanded to cover more nations.

The findings will enable the defence industry and the procurement authorizations to better understand the requirements of Armed Forces, and how to cooperate under applicable legal and regulatory requirements.

The paper extends the extant body of academic knowledge of the security of supply into the defence sector. It serves as a first step towards articulating a call for new approaches to collaboration in defence supply chains.

Public–Private Partnerships (PPPs) are crucial to the procurement of global infrastructure projects. Moreover, a price mode based on a cluster of core concessionary items is key to the delivery of value-for-money and successful project outcomes. However, existing research has yet to fully identify PPP concessionary items, nor yet described the range of practical price modes. This study provides taxonomy of core concessionary items impacting PPP projects, systematically classifies price modes, and assesses the applicability and risk impacts of those price modes on PPP projects.

This study adopts a comparative case study method in analyzing core concessionary items and alternative price modes. China is taken as the context, as it is one of the world’s largest PPP markets. In ensuring research validity and reliability, diverse data sources are utilized, with a graphic content analysis tool developed to capture the structure of price modes.

Eight PPP price modes are identified. These are: (1) UP (Unit Price) mode, (2) ALS (Annual Lump Sum) mode, (3) IRR (Internal Rate of Return) mode, (4) RP (Return for Investing Capital (RIC) - Profit Rate of O&M (PROM)) mode, (5) RFP (RIC - Financing Interest Rate (FR) - PROM) mode, (6) RFPL (RIC - FR - PROM - Lower Limit of User Charge (LLoUC)) mode, (7) RFL (RIC - FR - Lump Sum/Fixed Unit Price O&M Contract (LSOM/FUP)) mode, and (8) RFLL (RIC - FR - LSOM/FUP - LLoUC) mode. Other main findings are as follows: (1) Five risk allocation configurations can be achieved via these price modes. Yet while different price modes enable the allocation of specific risks, these do not always align with contracting parties’ original intentions. (2) IRR and RP modes may be less applicable in general because of their vulnerability in allocating critical risks and capacity for spurring opportunistic behavior.

By depicting the paths by which concessionary items in price modes affect cash flow, a systematic analysis of price modes was conducted exposing structural characteristics, along with risk allocation choice implications. The study is unique in: (1) Providing a systematic classification of PPP price modes used in PPP projects, (2) Presenting a comprehensive identification and streamlining of concessionary items in PPP practice, and (3) Analyzing the risk effects of different price modes. Together, these outcomes offer a hitherto unavailable perspective on PPP project risk management. The value of the study lies in the following: (1) Existing studies employ diverse concessionary items, but their applicability varies. This study offers an overarching framework facilitating decision-making in selecting appropriate PPP price modes and in determining concessionary items. (2) This study adds to the understanding of PPP price modes in significant ways that will aid local governments and potential sponsors in crafting and administrating more workable contract designs.