Search results

The purpose of this paper is to improve the degradation efficiency of Rhodamine B (RhB) by new photocatalytic materials.

Binary Z-scheme g-C₃N₄/Bi₂WO₆ photocatalytic material was synthesized by the one-step hydrothermal reaction. The construction of Z-scheme heterojunction led to the rapid separation of photogenerated electrons and holes, which would degrade RhB into small molecular substances to achieve the purpose of degradation.

It was found that Bi₂WO₆/25%g-C₃N₄ displayed the highest photocatalytic activity, which was about 1.44 and 1.34 times higher than that of pure Bi₂WO₆ and g-C₃N₄, respectively. According to the trapping experiments, the superoxide radical (·O²⁻) was the major active species of the RhB decomposition in Bi₂WO₆/g-C₃N₄ catalysts.

The successful synthesis of Z-scheme Bi₂WO₆/g-C₃N₄ provides new ideas and references for the design of catalysts with high photocatalytic activity, which should have wide applications in the future.

The purpose of this paper is to present a novel nitrile butadiene rubber (NBR) packaging structure, which can solve the problems of the low sensitivity, narrow frequency band and fluctuating frequency response curve of the MEMS bionic vector hydrophone.

A 0.05-mm-thick NBR sound-transparent cap was designed by theoretical analysis and simulation to reduce the signal attenuation caused by the packaging structure, and the frequency band of the hydrophone has been extended to 4 kHz. In this work, the vector hydrophone was fabricated by the MEMS technology and packaged with the NBR sound-transparent cap. The performance indicators were calibrated in the National Defence Underwater Acoustics Calibration Laboratory of China.

The results show that the sensitivity of NBR-packaged hydrophone reaches −170 dB (±2 dB), and the difference is less than 1 dB compared to bare chip. And the frequency band is 50 Hz-4 kHz. The hydrophone also has good directional pattern in the form of an 8-shape, and the pressure-resisting ability is more than 2 MPa.

The packaging structure significantly increases the sensitivity of the hydrophone and broadens the frequency band, providing a new method in the packaging design for MEMS hydrophone.

Acoustic signals of the underwater targets are susceptible to noise, reverberation, submarine topography and biology, therefore it is difficult to precisely locate underwater targets. This paper proposes a new underwater Hanbury Brown-Twiss (HBT) interference passive localization method. This study aims to achieve precise location of the underwater acoustic targets.

The principle of HBT interference with ultrasensitive detection characteristics in optical measurements was introduced in the field of hydroacoustics. The coherence of the underwater target signal was analyzed using the HBT interference measurement principle, and the corresponding relationship between the signal coherence and target position was obtained. Consequently, an HBT interference localization model was established, and its validity was verified through simulations and experiments.

The effects of different array structures on the localization performance were obtained by simulation analysis, and the simulations confirmed that the HBT method exhibited a higher positioning accuracy than conventional beamforming. In addition, the experimental analysis demonstrated the excellent positioning performance of the HBT method, which verified the feasibility of the proposed method.

This study provides a new method for the passive localization of underwater targets, which may be widely used in the field of oceanic explorations.