Search results

The purpose of this paper is to find optimal reef parameters to minimize the maximum instantaneous opening load for a reefed parachute with geometry and environmental parameters given in the model.

The dynamic model Drop Test Vehicle Simulation (DTVSim) is used to model the inflation and descent of the reefed parachute system. It is solved by the fourth-order Runge–Kutta method, and the opening load values are thereby obtained. A parallel genetic algorithm (GA) code is developed to optimize the reefed parachute. A penalty scheme is used to have the maximum dynamic pressure restricted within a certain range.

The simulation results from DTVSim fit well with experimental data from drop tests, showing that the simulator has high accuracy. The one-stage and two-stage reefed parachute systems are optimized by GA and their maximum opening loads are decreased by 43 and 25 per cent, respectively. With the optimal reef parameters, two of the peaks in the opening load curve are almost equal. The velocity, loiter time and flight path angle of the parachute system all change, but these changes have no negative effect on the parachute’s operational performance.

An optimization method for reefed parachute design is proposed for the first time. This methodology can be used in the preliminary design phase for a reefed parachute system and significantly improve design efficiency.

Due to economic development, tapered members are commonly applied in steel frames, namely, industrial halls, warehouses, exhibition centres, etc. In the design of cantilever steel beam structures in cities building design, tapering is introduced at the web profile to achieve utmost economy and suit the bending moment distributions. The cross-sectional shape of the beam is varied linearly to the moment gradient to achieve the target of higher efficiency with lower cost.

The shear deformation pattern and efficiency of the tapered steel section with perforation were investigated using finite element analysis. In addition, I-beam with web opening is studied numerically via LUSAS software for different parameters of tapering ratio, perforation shape and perforation size and perforation layout.

The highest contributing parameters for the highest shear buckling capacity and efficiency of the section were due to the small opening size and tapering ratio. Whilst the variation of perforation layout and spacing give a major effect on the shear strength and efficiency of the tapered steel section with perforation. Besides that, the highest efficiency model is found when the section is designed with 0.4 D diamond perforation in Layout 3 under a tapering ratio of 0.3. The critical shear buckling load and efficiency is reduced 14.39% and 13.91%, respectively, when perforations are added onto the tapered steel sections.

The tapered steel section with perforation has lower critical shear buckling load and efficiency compared to the tapered section without perforation but obtains a higher critical shear buckling load and efficiency compared to the uniform section without perforation.

The purpose of this work is to perform the finite element analysis (FEA) for the numerical discretization of sections with different arrangements of Web openings to investigate the torsion behavior. Typical hexagonal and circular Web opening sections are extensively used in steel construction due to economic development in building design. However, the use of sections with different arrangements of Web opening had improved the performance of the section with Web opening in terms of structural behavior which leads to economic design compared to typical I-beam.

The accuracy of FE results allows extensive numerical analysis of stress concentration magnitude for sections with Web openings, concentrating on the sizes and positions of the Web opening. Five shapes and three sizes of Web opening are used in this work. The shapes involved are c-hexagon, hexagon, octagon, circular and square, whereas the sizes of the Web opening involved are 0.67 D, 0.75 D and 0.80 D where D is the height of the Web. Two types of models for 200 × 100 × 8×6 mm steel section involved which is Model 1, where the section with 50 mm edge and 150 mm center-to-center distance and Model 2, where the section with 100 mm edge and 200 mm center-to-center distance.

It was found that these configurations affect the section with various shapes of Web openings sizes (0.67 D, 0.75 D, and 0.80 D). This also includes the spacing distances, with 50 mm edge and 150 mm center-to-center distance and also a section with 100 mm edge and 200 mm center-to-center distance. Through the FEA results of Model 1 and Model 2, it is found that 50% reduction in horizontal member length in hexagon Web opening, from 50 mm to 20 mm, caused increment about 30%–53% stress concentration in Web for c-hexagon. However, for a stress analysis of c-hexagon, geometry resulted in a lower stress concentration in the Web than other Web opening.

Additionally, the work emphasized the efficiency of Web opening shapes by using an appropriate Web opening radius in section with c-hexagon, hexagon, octagon, square and circular shapes. The final results show the contribution of appropriate Web opening radius to increase the section torsional capacity. It is observed that the torsional capacity at certain loading condition and its angle of twist is analysed.

This paper aims to study, the effects of opening shape, size and position as well as the aspect (height-to-length) ratio on the shear capacity, stiffness, ductility and energy dissipation capacity of triple-skin profiled steel-concrete composite shear wall (TSCSW) and investigate and compare them to those of concrete-stiffened steel plate shear walls (CSPSW). Two kinds of opening, circular and square, with different sizes and positions and two aspect ratios of 1:1 and 3:1 are considered in the simulations.

This study presents a novel TSCSW and compares its behavior with the existing CSPSW under the effect of monotonic and cyclic loadings. TSCSW is composed of three corrugated steel plates filled with concrete. The two external side plates are connected to the concrete core by means of several intermediate fasteners and the third one is an inner steel plate embedded within the concrete panel. The internal plate is a buckling restrained plate surrounded by concrete. This is the main superiority of TSCSW over other kinds of existing composite shear walls.

The results show that the shear capacity and the energy dissipation capacity of the proposed composite wall, TSCSW, are respectively about 16 and 12% higher than those of CSPSW when there is no opening. If an opening is considered in the wall, as the size of the opening is increased, the shear capacity, stiffness, ductility and absorbed energy of the two walls are decreased similarly. The destructive effect of square openings on the performance of the walls is more than that of circular openings.

This is an original work.

The purpose of this paper is to obtain an insight into the effects of sliding and/or joint opening at the contraction, perimeter and concrete lift joints on the nonlinear seismic response of arch dams.

The seismic behavior of a typical thin double curvature arch dam is studied by a nonlinear finite element program developed by the authors. Joints are modeled with the use of zero thickness interface elements. Various constitutive relationships are implemented to account for sliding and opening along the joints. Effects of joint sliding parameters and foundation rock flexibility are also considered in the analyses.

The findings provide information about dynamic stress distribution through the dam body and stability of the dam as a whole and also the local stability of the most critical concrete blocks in the dam body.

Useful information for designing new arch dams or seismic evaluation of constructed dams.

This paper takes into account the stability of concrete blocks in the dam body as well as stability of the structure as a whole. Except for contraction joints, perimeter and concrete lift joints are also modeled. Practical as well as detailed models of sliding are provided for the analyses. The paper offers practical help to design and dam engineers.

Due to the enormous increase in economic development, structural steel material gives an advantage for the construction of stadiums, factories, bridges and cities building design. The purpose of this study is to investigate the behaviour of bending, buckling and torsion for I-beam steel section with and without web opening using non-linear finite element analysis.

The control model was simulated via LUSAS software with the four main parameters which included opening size, layout, shape and orientation. The analysis used a constant beam span which is 3.5 m while the edge distance from the centre of the opening to the edge of the beam is kept constant at 250 mm at each end.

The analysis results show that the optimum opening size obtained is 0.65 D while optimum layout of opening is Layout 1 with nine web openings. Under bending behaviour, steel section with octagon shapes of web opening shows the highest yield load, yield moment and thus highest structural efficiency as compared to other shapes of openings. Besides, square shape of web opening has the highest structural efficiency under buckling behaviour. The lower buckling load and buckling moment contribute to the higher structural efficiency.

Further, the square web opening with counter clockwise has the highest structural efficiency under torsion behaviour.

The purpose of this paper is to develop a novel type of full‐size flight control iron bird based on a passive electronic hydraulic servo loading system.

On the basis of mathematical modeling of passive loading system math model, the detailed design process of the flight control iron bird is presented. Subsequently, the system digital simulation and physical verification are also given.

Experimental results show that the proposed approach can reduce the redundant forces and improve the system dynamic and force‐tracking accuracy.

This newly‐developed flight control iron bird system has been successfully applied in the flight control system design of some fighters.

The proposed approach for flight control iron bird is new and significant for the design of fighter flight control systems.

THE opening months of the last war were conducted in a very leisurely fashion because the expected disasters had not befallen us. Not until our armies were rescued from the beaches of Dunkirk did the stark realities of the situation percolate into the public mind. Once the facts were understood the whole country was galvanised into activity.

It is generally known that the perforated section such as the castellated section is good to sustain distributed loads but inadequate to sustain highly concentrated loads. Therefore, it is possible to design the opening in a different arrangement of web opening to achieve section efficiency, thus improving the strength and torsional behaviour of the section with web opening. This study aims to focus on the finite element analysis of I-beam with and without openings in steel section dominated to lateral-torsional buckling behaviour.

In this work, the analysis of different sizes, shapes and arrangements of web opening is performed by using LUSAS application to conduct numerical analysis on lateral-torsional buckling behaviour. This involves three diameter sizes of web opening, five types of opening shapes and two criteria of the model.

The section with c-hexagon web opening was placed about 200-mm centre to centre and 100-mm edge distance, contribute to 7.26% increase of buckling capacity. For the section with 150-mm centre to centre and 50-mm edge distance, the occurrence of local buckling contributes to decrease of lateral buckling section capacity to 19.943 kNm, where pure lateral-torsional buckling mostly occurred because of prevented section. Besides that, the web opening diameter was also analysed. The web crippling was observed because of the increase of opening diameter from 0.67 to 0.80 D.

This contributes to a decrease in buckling capacity as figured in the contour of the deformed shape. For Model 1, an increase of buckling capacity (31.46%) is observed when the opening diameter are changed from 0.67 to 0.80 D.

Steel shear walls have recently received exclusive remark. Respective of most building code requirements, design of shear wall vertical boundary elements (VBEs) and local boundary elements (LBEs) against web yielding triggers exaggerated stiffness. The extent of stiffness reduction effects in boundary elements thus calls for more exhaustive investigation. The paper aims to discuss these issues.

To this end, FEM-based push-over curves demonstrating base shear vs roof displacement, and von Mises plastic strains were scrutinized in half-scale and full-size models. Analyses were in perfect conformity with experimental data.

With reference to the AISC requirement, up to 35 percent decrease in the VBE moments of inertia could be imparted in higher levels without the ultimate load capacity nor displacement to failure being reduced. Also considered was open shear walls with reduced or minimum-design LBEs, the latter being used in continuous or abridged form. LBEs could be used with a moment of inertia 80 percent smaller than required if only used in a continuous form. The effect due to opening geometry was negligible on loading capacity but distinguished on the post-yielding buckling-induced softening.

Light-weight design of low- to medium-level steel structures against earthquake loads.

With respect to continuous walls, the results are more comprehensive than those existing in the literature in that they combine the effects due to scale and orientation (horizontal or vertical) of boundary elements. The results for open shear walls are not only comprehensive but also original in a sense that they account for the influences induced by the opening type (door or window), orientation (horizontal or vertical), and design (full-length or abridged) of boundary elements, in reduced form, on the lateral stiffness of the frame.