Search results

A brief review of earlier studies on the productivity scenario of Indian industry shows that most of the studies analysed are confined to either parametric approach or growth accounting approach of measuring productivity. At the same time, the few studies based on the non-parametric [namely, Malmquist productivity index (MPI)] overlook the returns to scale conditions as well as the bias involved in the estimation of distance functions. Given this backdrop, this study aims to provide a robust measure of productivity, which considers the returns to scale assumptions and correct for the bias involved in the estimation of productivity.

This study empirically tests for the returns to scale that exists in the chemical and chemical products industry in India. The test result suggests that Ray and Desli (1997) approach of MPI is the appropriate one for the present context. Initially, the conventional Ray and Desli (1997) estimation and decomposition of MPI for the period 2001 to 2017 is being used. Subsequently, to correct for the bias in the estimation of efficiency scores used for the estimation of MPI, the bootstrapping algorithm of Simar and Wilson (2007) has been extended into the context of MPI estimation.

The results from the conventional Malmquist productivity estimates testifies to an improvement of total factor productivity (TFP) in seven out of 16 years under consideration. On the contrary, TFP growth is recorded only in the four years throughout the period after the bias correction. A greater discrepancy between the two measures has been found in the case of scale change factor component of MPI.

The technical change (TC) component positively influences TFP, whereas scale change factor (SCF) deteriorates the TFP condition of this industry. It will be appropriate for these firms to identify and operate under an optimal scale of operation, along with reaping the benefits of technological change. From a methodological perspective, researchers should consider the potential bias that arise in estimation of TFP and use a larger sample whenever possible.

This paper brings in a new perspective to the existing literature on industrial productivity. As against earlier studies, this study empirically tests the returns to scale of the sector under consideration and uses the most appropriate approach to measure productivity. The effect of sampling bias on TFP and its components is analysed.

This paper explores the impact of international acquisitions on the efficiency and productivity of the cement industry in an emerging economy.

The data envelopment analysis (DEA) and Malmquist index (MI) are used to calculate the partial efficiency and productivity of individual inputs (materials, labour and fixed assets), as well as the total factor efficiency and productivity during the period 2000–2018. DEA and MI are combined with bootstrapping to perform succinct statistical inferences for determining the accuracy of results. In this paper we apply the input-oriented CCR DEA Window model. With respect to the level of analysis, data was collected from individual companies and then aggregated data at the industry level.

The research results show that international acquisitions positively affect efficiency of the cement industry in the long term. Efficiency of capital is lower in the short period after acquisitions. Additionally, international acquisitions positively affect partial productivity, as well as total factor productivity of the cement industry.

The results of the study may be significant for managers and policy makers to design appropriate strategies for the improvement of the cement industry performance over time.

Research in emerging economies related to subject matter is limited, and this is one of the earliest research studies which explore change in efficiency and productivity at the level of Serbian cement industry.

The current paper's goal is to examine the productivity of the closed banking sector evidenced from Ethiopia. In addition, the inclusion of intangibles on productivity was examined in the current paper.

First, the standard Malmquist Productivity Index (MPI) was employed for 13 commercial banks for both stages. Second, by excluding the state-owned commercial bank, the analysis employed a bootstrapped MPI for the robust and comprehensive conclusion. Furthermore, from 2010 to 2019, the fixed effect Ordinary Least Square (OLS) regression with balanced panel data was used.

The standard MPI in both stages shows that the productivity of Ethiopian commercial banks is declining. The technological shock was the main reason for the loss. The catch-up in both stages scored above unity, mainly due to the pure efficiency change. Besides, when combined with tangible resources, the inclusion of resource-based view (RBV) proxy variables reduces technological shock regress and ultimately improves productivity change. The bootstrapped MPI also reveals that technological shock is the primary source of the productivity decline. However, efficiency change also contributes to the productivity decline based on this estimation.

Future research could examine the more extensive productivity analysis by considering the primary sources of data collections for resource-based variables.

According to the study's results, banking regulatory authorities and bank management, including the shareholders, should continue to invest in cutting-edge technology to improve the productivity of the banking sector.

This is the first comprehensive study of productivity for Ethiopian commercial banks based on the standard MPI, bootstrapped MPI, and OLS by incorporating all resources into the analysis.

This study attempts to comprehensively analyze the cost Malmquist productivity index of conventional and Islamic banks in Saudi Arabia, the largest dual banking sector in the world, during the COVID-19 pandemic.

This study employs the novel approach of cost Malmquist productivity index, which focuses on production costs, to measure the change in cost productivity so that the actual impact of the COVID-19 pandemic could be captured.

The Saudi Central Bank has successfully mitigated the impact of the COVID-19 epidemic on the Saudi banking sector by implementing several policies and services. This success is reflected in the large positive shift in the production frontier of Saudi banks. Moreover, it was found that Islamic Saudi banks were by far more productive than conventional Saudi banks during the COVID-19 pandemic. However, the total cost productivity index (CMPCH) of Islamic Saudi banks starts to decline sharply in the last quarter of 2022 compared to conventional Saudi banks, indicating that Islamic banks in Saudi Arabia are suffering the most from the tighter monetary policy recently implemented by the Saudi Central Bank.

The results provide insights for policymakers and investors on how different types of banks respond differently to economic crises and monetary policy changes. Targeted support measures may be needed to ensure all banks remain productive and efficient.

To the author’s knowledge, this is the first study to use this innovative methodology to assess the impact of COVID-19 on bank performance in a dual banking sector.

The aim of this article is to research on forestry green total factor productivity and explore the impact of financial support on forestry green total factor productivity.

The methods used in this study are super efficiency SBM model of undesired output and empirical model. SBM model is a kind of Data Envelopment Analysis (DEA). The SBM model with non-expected outputs (slacks-based measure) can be used to deal with the problem of efficiency measurement with multiple input and output variables and can be used to analyze the efficiency of green development of forestry economy.

First, the overall green total factor productivity of the authors’ country's forestry has shown a trend of first decline and then an increase from 2008 to 2018, and there are significant spatiotemporal differences; second, financial support has a significant positive impact on forestry green total factor productivity; third, environmental regulation has a significant threshold effect in the process of financial support on forestry green total factor productivity, and the role of financial support shows a trend of first increasing and then decreasing.

Secondly, taking the data of 30 provinces and cities in the authors’ country from 2008 to 2018 as the research object, using the super-efficiency SBM-Malmquist index to measure the country's forestry green total factor productivity and analyze its temporal and spatial changes; finally, a dynamic panel model was established to explore the impact of financial support on forestry green total factors quantitative impact on productivity, and adding environmental regulation as a threshold variable to establish a dynamic threshold regression, and found that financial support has a nonlinear impact on forestry green total factor productivity.

Taiwan’s hotel industry was adversely impacted by the COVID-19 pandemic. This study aims to examine the effect of strategic choices by Taiwanese international tourist hotels before and during the pandemic environments.

A data envelopment analysis (DEA)-based Malmquist methodology is used in this study to provide a mechanism to assess Taiwanese hotel strategy performance. Changes in the productivity and performance of Taiwanese international tourist hotels were analyzed in the periods before and during the pandemic to uncover insights useful should a similar crisis occur in the future. Panel data were obtained from the annual report of international tourist hotels published by the Taiwan Tourism Bureau from 2017–2020. Two groups of hotels were analyzed in this study: city hotels and scenic hotels.

The findings of this study reveal that chain hotels tended to perform better than independent hotels in both city and scenic areas during the global pandemic. Specifically, the crisis caused a substantial decline in productivity and profitability for international tourist hotels in Taipei City during the COVID-19 period. Compared to city hotels, findings also indicate that most international tourist hotels in scenic areas were able to maintain better productivity, including larger-sized scenic hotels.

The DEA-based analysis provides unique and valuable insights for hotel firm leaders on how to better identify and make strategic choices when responding to future crises.

The forest products processing industry is a key component of the forestry economy, and the level of companies’ operating efficiency directly affects its profitability and market competitiveness.

In order to deeply study the operation status of forest product processing industry, this paper takes the panel data of 70 listed forest product processing companies from 2015 to 2022 as the basis, and adopts BBC, CCR and DEA-Malmquist models to measure the operating efficiency of these companies. Meanwhile, the Tobit model is applied to deeply explore the impact of innovation input on operating efficiency.

The results of the paper show that: (1) the overall operating efficiency of listed forest product processing companies performs well, and the improvement of technology level promotes the growth of total factor productivity; (2) innovation input plays a significant positive role in listed forest product processing companies, which positively affects the operating efficiency.

A scientific and reasonable evaluation of the operating efficiency of listed forest product companies is of great practical significance to the development of the forestry industry The study of forest product processing industry is of key significance to the social economy.

This paper explores the improvement of production and operation efficiency of forest products processing enterprises for the purpose of in-depth analysis of the current situation of China's forest products processing enterprises, which is conducive to improving the innovation and operation efficiency of China's forest products processing enterprises, and realizing the high-quality development of China's forest products processing industry.

Decree Law No. 663 introduced a decentralized organizational structure and administration pertaining to Turkish public hospitals in November 2011. This study aims to explore the effects of the public hospital unions (PHUs), which were a result of Decree Law No. 663, on the efficiency and productivity of public hospitals.

Data envelopment analysis (DEA) and DEA-based Malmquist total factor productivity (TFP) index were used from 2011 to 2016. Raw materials and supply expenses, salaries and fringe benefits, other service costs, general administrative expenses, total number of beds, number of specialists, number of residents, number of general practitioners, number of nurses and midwives and other medical officials were used as input variables. Working capital turnover, number of inpatients, number of outpatients and number of surgical operations for Groups A, B and C were used as output variables.

According to the DEA scores, the percentage of efficient hospitals showed a declining trend from 2011 to 2016. The TFP results also showed a decreasing trend from 2011 to 2016.

Providing administrative and financial autonomy to public hospital managers may cause efficiency and productivity losses, which is contrary to expectations.

This study is the first to reveal the impact of decentralization of public healthcare providers on their performance levels in Turkey.

This paper aims to investigate the impact of acquisition and organic growth on the operating efficiency and total factor productivity change of retailing networks.

The assessment uses low-frequency data of newly opened stores and acquired stores of a large supermarket (S/M) network in Athens, for a period (financial year 2014) where the network began to refocus on its organic growth after a two-year period of deep recession (financial years 2012–2013). To evaluate the performance effects of both strategies, the authors employ the innovative benchmarking tool of bootstrap data envelopment analysis (DEA) for measuring operational efficiency and the Malmquist productivity index DEA approach for measuring productivity change over time.

The short-run evidence indicates that compared to organic growth, acquisitions lead to lower operating efficiency. However, this difference gradually converges over time as acquired stores show a higher rate of productivity compared to newly opened stores. The authors interpret this as a result of the smooth integration of the acquired chain store into the organizational structure of the existing store network given their significant similarities in terms of products and customers.

The authors inform managers of store chains that during the process of organic growth, a general improvement in efficiency takes place while in the case of acquisitions, the required post-acquisition streamlining actions cause a short delay on the realization of efficiency gains. Therefore, managers should not take it for granted that acquisitions cause a long-term decrease in efficiency.

The study contributes to the literature on growth strategies and retailing performance in general, by offering new evidence regarding the comparative effect of the horizontal growth modes on the efficiency of store chains.

This study aims to propose a refined dynamic network slacks-based measure (DNSBM) to evaluate the efficiency of China's regional green innovation system which consists of basic research, applied research and commercialization stages and explore the influencing factors of the stage efficiency.

A two-step procedure is employed. The first step proposes an improved DNSBM model with flexible settings of stages' input or output efficiency and uses second order cone programming (SOCP) to solve the non-linear problem. In the second step, least absolute shrinkage and selection operator (LASSO) and Tobit models are used to explore the influencing factors of the stage efficiency. Global Dynamic Malmquist Productivity Index (GDMPI) and Dagum Gini coefficient decomposition method are introduced for further discussion of the productivity change and regional differences.

On average, Chinese provincial green innovation efficiency should be improved by 24.11% to become efficient. The commercialization stage outperforms the stages of basic research and applied research. Comparisons between the proposed model and input-oriented, output-oriented and non-oriented DNSBM models show that the proposed model is more advanced because it allows some stages to have output-oriented model characteristics while the other stages have input-oriented model characteristics. The examination of the influencing factors reveals that the three stages of the green innovation system have quite diverse influencing factors. Further discussion reveals that Chinese green innovation productivity has increased by 39.85%, which is driven mainly by technology progress, and the increasing tendency of regional differences between northern and southern China should be paid attention to.

This study proposes an improved dynamic three-stage slacks-based measure (SBM) model that allows calculating output efficiency in some stages and input efficiency in the other stages with the application of SOCP approach. In order to capture productivity change, this study develops a GDMPI based on the DNSBM model. In practice, the efficiency of regional green innovation in China and the factors that influence each stage are examined.