Search results

The purpose of this study is to optimize and improve conventional welding using EMF assisted technology. Current industrial production has put forward higher requirements for welding technology, so the optimization and improvement of traditional welding methods become urgent needs.

External magnetic field assisted welding is an emerging technology in recent years, acting in a non-contact manner on the welding. The action of electromagnetic forces on the arc plasma leads to significant changes in the arc behavior, which affects the droplet transfer and molten pool formation and ultimately improve the weld seam formation and joint quality.

In this paper, different types of external magnetic fields are analyzed and summarized, which mainly include external transverse magnetic field, external longitudinal magnetic field and external cusp magnetic field. The research progress of welding behavior under the effect of external magnetic field is described, including the effect of external magnetic field on arc morphology, droplet transfer and weld seam formation law.

However, due to the extremely complex physical processes under the action of the external magnetic field, the mechanism of physical fields such as heat, force and electromagnetism in the welding has not been thoroughly analyzed, in-depth theoretical and numerical studies become urgent.

The purpose of this paper is to introduce and analyze a dual-side-permanent-magnet Halbach array vernier (DSPMHV) machine and to propose methods for achieving high torque density.

Flux harmonics and torque characteristics are analyzed by using finite element analysis. First, a suitable pole-slot combination is selected by comparison. Second, field modulation processes of DSPMHV machine are analyzed to identify the reason for high torque density. And it is compared with dual-side-PM (DSPM) machine to analyze flux harmonic and verify the flux concentrating effect of the Halbach array.

The permanent magnet (PM) field of the DSPM machine is approximately equal to the superposition of stator-PM field and rotor-PM field, which is the reason for high torque density. And the Halbach array can reduce flux leakage and increase the amplitude of main flux harmonics, then further improves torque. Improvement of torque can be achieved by choosing right pole-slot combination, adopting DSPM machine structure, reducing flux leakage and adopting field modulation principle.

The DSPMHV machine with split-tooth is proposed in this paper by combining the Halbach array with DSPM structure. This paper analyzes the bidirectional field modulation process, the reason for high torque density of the DSPM machine is obtained. Comparison with the DSPM machine verifies the flux concentrating effect of Halbach array. To alleviate the magnetic saturation in part of stator teeth, this paper proposes an improved DSPMHV machine with shaped auxiliary magnet.

Cilia serves numerous biological functions in the human body. Malfunctioning of nonmotile or motile cilia will have different kinds of consequences for human health. More specifically, the directed and rhythmic beat of motile cilia facilitates the unidirectional flow of fluids that are crucial in both homeostasis and the development of ciliated tissues. In cilia-dependent hydrodynamic flows, tapering geometries look a lot like the structure of biological pathways and vessels, like airways and lymphatic vessels. In this paper, the Carreau fluid model through the cilia-assisted tapered channel (asymmetric) under the influence of induced magnetic field and convective heat transfer is investigated.

Lubrication theory is a key player in the mathematical formulation of momentum, magnetic field and energy equations. The formulated nonlinear and coupled differential equations are solved with the aid of the homotopy perturbation method (HPM). The graphical results are illustrated with the help of the computational software “Mathematica.”

The impact of diverse emerging physical parameters on velocity, induced magnetic field, pressure rise, current density and temperature profiles is presented graphically. It is observed that the cilia length parameter supported the velocity and current density profiles, while the Hartman number and Weissenberg number were opposed. A promising effect of emerging parameters on streamlines is also perceived.

The study provides novel aspects of cilia-driven induced magnetohydrodynamics flow of Carreau fluid under the influence of induced magnetic field and convective heat transfer through the asymmetric tapered channel.

The purpose objective of this study is to identify the friction coefficient and friction effect in electromagnetic upsetting (EMU) high-speed forming process.

Based on numerical simulation and upsetting experiment of 2A10 aluminum alloy bar, the friction coefficient between contact surfaces is obtained by combining the fitting displacement distribution function and the electromagnetic-mechanical coupling numerical model, and the influence of friction effect is analyzed.

The maximum impact velocity and acceleration during EMU are 13.9 m/s and −3.3 × 106 m/s², respectively, and the maximum strain rate is 7700 s⁻¹. The functional distribution relationship between friction coefficient combination (FS, FD) and characteristic parameters [upper diameter (D1) and middle diameter (D2)] is established. The values of FS and FD are 0.1402 and 0.0931, respectively, and the maximum relative error is 2.39%. By analyzing the distribution of equivalent stress and strain, it is found that plastic deformation has obvious zoning characteristics and there is serious failure concentration in the strong shear zone.

Friction coefficient significantly affects stress or strain distributions in material forming process, but it is difficult to obtain friction coefficients through experimental tests in the high-speed forming process. In this paper, a multi-field coupling numerical model is proposed to determine friction coefficients and applied to the electromagnetic impact loading process (a high-speed forming process).

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-05-2024-0154/

The purpose of this study is to model the global dynamic hysteresis properties with an improved Jiles–Atherton (J-A) model through a unified set of parameters.

First, the waveform scaling parameters β, λ_k and λ_c are used to improve the calculation accuracy of hysteresis loops at low magnetic flux density. Second, the Riemann–Liouville (R-L) type fractional derivatives technique is applied to modified static inverse J-A model to compute the dynamic magnetic field considering the skin effect in wideband frequency magnetization conditions.

The proposed model is identified and verified by modeling the hysteresis loops whose maximum magnetic flux densities vary from 0.3 to 1.4 T up to 800 Hz using B30P105 electrical steel. Compared with the conventional J-A model, the global simulation ability of the proposed dynamic model is much improved.

Accurate modeling of the hysteresis properties of electrical steels is essential for analyzing the loss behavior of electrical equipment in finite element analysis (FEA). Nevertheless, the existing inverse Jiles–Atherton (J-A) model can only guarantee the simulation accuracy with higher magnetic flux densities, which cannot guarantee the analysis requirements of considering both low magnetic flux density and high magnetic flux density in FEA. This paper modifies the dynamic J-A model by introducing waveform scaling parameters and the R-L fractional derivative to improve the hysteresis loops’ simulation accuracy from low to high magnetic flux densities with the same set of parameters in a wide frequency range.

This study aims to examine the plane wave reflection problem in micropolar orthotropic magneto-thermoelastic half space, considering the influence of impedance as a boundary in a nonlocal elasticity.

This study presents the novel formulation of governing partial differential equations for micropolar orthotropic medium with impact of nonlocal thermo-elasticity under magnetic field.

This study provides the numerical results validation for a particular numerical data and expression for the amplitude ratios of reflected waves and identifies the existence of four different waves, namely, quasi longitudinal displacement qCLD-wave, quasi thermal wave qCT-wave, quasi transverse displacement qCTD-wave and quasi-transverse micro-rotational qCTM-wave. The study derives the velocity equation giving the speed and phase velocity of these waves. The study also shows that the small-scale size effect gives significant impact on phase velocity.

The graphical analysis examines the variation of speeds and coefficients of attenuation of these waves due to frequency, magnetic field and nonlocal parameters. Also, significant conclusions on the variation of reflection coefficient against nonlocal parameter, frequency, impedance parameter and angle of incidence are provided graphically.

The creation of more effective micropolar orthotropic anisotropic materials which are very useful in the daily life and their applications in earth science are greatly impacted by the findings of this study.

The authors of the submitted document initiated and produced it collectively, with equal contributions from all members.

This paper aims to present a numerical investigation into heat transfer and entropy generation resulting from magnetohydrodynamic laminar flow through a microchannel under asymmetric boundary conditions. Furthermore, the authors consider the effects of viscous dissipation and Joule heating.

The finite difference method is used to obtain the numerical solution. Simulations are conducted across a broad range of Hartmann (Ha = 0 ∼ 40) and Brinkman (Br = 0.01 ∼ 1) numbers, along with various asymmetric isothermal boundaries characterized by a heating ratio denoted as ϕ.

The findings indicate a significant increase in the Nusselt number with increasing Hartmann number, regardless of whether Br equals zero or not. In addition, it is demonstrated that temperature differences between the microchannel walls can lead to substantial distortions in fluid temperature distribution and heat transfer. The results reveal that the maximum entropy generation occurs at the highest values of Ha and η (a dimensionless parameter emerging from the formulation) obtained for ϕ = −1. Moreover, it is observed that local entropy generation rates are highest near the channel wall at the entrance region.

The study provides valuable insights into the complex interactions between magnetic fields, viscous dissipation and Joule heating in microchannel flows, particularly under asymmetric heating conditions. This contributes to a better understanding of heat transfer and entropy generation in advanced microfluidic systems, which is essential for optimizing their design and performance.

To improve the output torque density of the machine and to be better suited for automation applications, this paper aims to propose a double-permanent-magnet enhanced hybrid stepping machine (DPMEHSM) with tangential and radial magnetization.

First, the structure of DPMEHSM is introduced and its operation principle is analyzed by describing the variation in stator poles versus time. Second, based on the similar electrical load and amount of PM, the size equations of the DPMEHSM are designed and the main parameters are presented. Third, the electromagnetic performances including the PM flux linkage distribution, magnetic density distribution, air-gap field, back electromotive force (back-EMF), detent torque, holding torque and output torque of DPMEHSM and stator-PM hybrid stepping machine (SPMHSM) are analyzed based on the finite element method.

The results show that the DPMEHSM has superiority in back-EMF, holding torque and output torque.

This paper proposes a DPMEHSM with tangential and radial magnetization to improve the output torque density.

This paper aims to explore the numerical study of the steady two-dimensional MHD hybrid Cu-Fe₃O₄/EG nanofluid flows over an inclined porous plate with an inclined magnetic effect. Iron oxide (Fe₃O₄) and copper (Cu) are hybrid nanoparticles, with ethylene glycol as the base fluid. The effects of several physical characteristics, such as the inclination angle, magnetic parameter, thermal radiation, viscous propagation, heat absorption and convective heat transfer, are revealed by this exploration.

Temperature and velocity descriptions, along with the skin friction coefficient and Nusselt number, are studied to see how they change depending on the parameters. Using compatible similarity transformations, the controlling equations, including those describing the momentum and energy descriptions, are turned into a set of non-linear ordinary differential equations. The streamlined mathematical model is then solved numerically by using the shooting approach and the Runge–Kutta method up to the fourth order. The numerical findings of skin friction and Nusselt number are compared and discussed with prior published data by Nur Syahirah Wahid.

The graphical representation of the velocity and temperature profiles within the frontier is exhibited and discussed. The various output values related to skin friction and the Nusselt number are shown in the table.

The new results are compared to past research and discovered to agree significantly with those authors’ published works.

(1) A mathematical model for the Hybrid nanofluids flow is used as carriers for delivering drugs. (2) The flow conditions are controlled to enable drug-loaded nanofluids to flow through the smaller gap between the two tubes. (3) Hybrid nanofluids (HNFs) made from silver (Ag) and titanium dioxide (TiO₂) nanoparticles are analyzed for applications of drug delivery. (Ag) and (TiO₂) (NPs) are suitable candidates for cancer treatment due to their excellent biocompatibility, high photoactivity, and low toxicity. (4) The new strategy of artificial neural networks (ANN) is used which is machine-based and more prominent in validation, and comparison with other techniques.

The two Tubes are settled in such a manner that the gap between them is uniform. The Control Volume Finite Element Method; Rk-4 and Artificial Neural Network (ANN).

(1) From the obtained results it is observed that the dispersion and distribution of drug-loaded nanoparticles within the body will be improved by the convective motion caused by hybrid nanofluids. The effectiveness and uniformity of drug delivery to target tissues or organs is improved based on the uniform flow and uniform gap. (2) The targeting efficiency of nanofluids is further improved with the addition of the magnetic field. (3) The size of the cylinders, and flow rate, are considered uniform to optimize the drug delivery.

(1)The flow phenomena is considered laminar, one can use the same idea through a turbulent flow case. (2) The gap is considered uniform and will be interesting if someone extends the idea as non-uniform.

(1) To deliver drugs to the targeted area, a suitable mathematical model is required. (2) The analysis of hybrid nanofluids (HNFs) derived from silver (Ag) and titanium dioxide (TiO₂) nanoparticles is conducted for the purpose of drug delivery. The biocompatibility, high photoactivity, and low toxicity of (Ag) and (TiO₂) (NPs) make them ideal candidates for cancer treatment. (3) Machine-based artificial neural networks (ANN) have a new strategy that is more prominent in validation compared to other techniques.

The drug delivery model is a useful strategy for new researchers. (1) They can extend this idea using a non-uniform gap. (2) The flow is considered uniform, the new researchers can extend the idea using a turbulent case. (3) Other hybrid nanofluids flow, in the same model for other industrial usages are possible.

All the obtained results are new. The experimental thermophysical results are used from the existing literature and references are provided.