Search results

In the Global North, affordable housing has evolved and thrived, and it is now gaining traction in the Global South, where governments have been vocal supporters of the concept. Therefore, this paper aims to investigate the important criteria for selecting affordable housing units in Ghana.

A quantitative research approach was used, and a survey was administered to the residents. The data was analysed using both descriptive and inferential statistics. The relative importance index technique was used to rank the important criteria, and the EFA technique was used to create a taxonomy system for the criteria.

The hierarchical ranking of the most significant criteria for selecting affordable housing includes community safety, waste management and access to good-quality education. Furthermore, the important criteria for selecting affordable housing are classified into two groups, namely, “sustainability criteria” and “housing demand and supply and social service provision”.

This study has implications for the real estate industry and construction stakeholders, as this will inform decision-making in terms of the design of affordable housing and the suitability of the location for the development.

These findings provide a baseline to support potential homeowners and tenants in their quest to select affordable housing. Furthermore, these findings will aid future longitudinal research into the indicators or criteria for selecting suitable locations for the development of low- and middle-income housing.

Though alternative building technologies (ABTs) have been encouraged to address accessible and affordable issues in low-cost housing (LCH) provision, their adoption is still overwhelmed with encumbrances. The encumbrances that hinder ABT adoption require an in-depth study, especially in developing countries like Nigeria. However, studies regarding ABT and its role in improving Nigeria's LCH to achieve Sustainable Development Goal (SDG) 11 are scarce. This research investigates encumbrances to ABT adoption in Nigeria's LCH provision and suggests feasible measures to prevent or reduce the encumbrances, thereby improving achieving SDG 11 (sustainable cities and communities).

This research utilised qualitative research and adopted a face-to-face interview as the primary data collection. The interviewees comprised ABT practitioners and end users in Nigeria who were chosen by a convenient sampling technique. The study's data were analysed manually through a thematic approach.

This study shows that stakeholders should embrace ABT in LCH provision to improve achieving SDG 11 in Nigeria. Also, it clustered the perceived 20 encumbrances to ABT adoption in LCH provision into government/policymaker, housing developers/building contractors, ABT users and ABT manufacturers-related issues in Nigeria's context. This study suggested mechanisms to mitigate encumbrances to ABT adoption in LCH provision, thereby improving achieving SDG 11.

This research adds to the limited literature by analysing ABT adoption encumbrances in Nigeria's LCH provision, which could assist policy formulation for the uptake of ABT in LCH provision and improve achieving Goal 11.

The purpose of this study is to explore the causal relationship between smart transportation technology innovation and green transportation efficiency.

A comprehensive framework is used in this paper to assess the level of green transportation efficiency in China based on the instrumental variable – generalized method of moments model, followed by an examination of the impact of innovation in smart transportation technology on green transportation efficiency. Additionally, their non-linear relationship is explored, as are their important moderating and mediating effects.

The findings indicate that, first, the efficiency of green transportation is significantly enhanced by innovation in smart transportation technology, which means that investing in such technologies contributes to improving green transportation efficiency. Second, in areas where green transportation efficiency is initially low, smart transportation technology innovation exerts a particularly potent influence in driving green transportation efficiency, which underscores the pivotal role of such innovation in bolstering efficiency when it is lacking. Third, the relationship between smart transportation technology innovation and green transportation efficiency is moderated by information and communication technology, and the influence of smart transportation technology innovation on green transportation efficiency is realized through an increase in energy efficiency and carbon emissions efficiency.

Advancing green transportation is essential in establishing a low-carbon trajectory within the transportation sector.

This paper aims to explore the intellectual structure shaping the circular economy (CE) discourse within the built environment in Africa.

The study adopted a bibliometric analysis approach to explore the intellectual structure of CE in the built environment in Africa. The authors collected 31 papers published between 2005 and 2021 from the Scopus database and used VOSviewer for data analysis.

The findings show that there are six clusters shaping the intellectual structure: demolition, material recovery and reuse; waste as a resource; cellulose and agro-based materials; resilience and low-carbon footprint; recycling materials; and the fourth industrial revolution. The two most cited scholars had three publications each, while the top journal was Resources, Conservation and Recycling. The dominant concepts included CE, sustainability, alternative materials, waste management, lifecycle, demolition and climate change. The study concludes that there is low CE research output in Africa, which implies that the concept is either novel or facing resistance.

The data were drawn from one database, Scopus; hence, adoption of alternative databases such as Web of Science, Google Scholar and Dimensions could potentially have yielded a higher number of articles for analysis which potentially would result in different conclusions on the subject understudy.

This study made a significant contribution by articulating the CE intellectual structure in the built environment, identified prominent scholars and academic platforms responsible for promoting circularity in Africa.

This study aims to examine the challenges for green retrofitting implementation in existing residential buildings to lower the running cost and achieve a better energy-efficient system.

This study adopted a qualitative approach by interviewing conveniently selected 16 construction professionals, made up of architects, quantity surveyors and engineers. Data received were analysed using the content analysis method.

The findings revealed that the main barriers to incorporating green retrofitting in the existing residential buildings as the nature of the existing structures, limited knowledge, not being a priority and high costs involved in the process. Moreover, other factors influencing property developers’ decision to apply energy-efficient principles in a residential home include cost (initial capital and maintenance), level of knowledge, nature of the climate in the area, local legislation, more independence and increasing the property’s market value and environmental aspect.

This study is limited to South Africa; thus, the literature available was limited.

People’s perceptions, either wrong or correct, affect their ability to make an informed decision to adopt green retrofitting principles, thereby denying them the opportunity to reap the associated benefits. Therefore, there is an urgent need for the construction industry stakeholders and government to increase educational opportunities for property owners on the importance of green retrofitting.

This study provides the occupants with the possible barriers and problem areas with implementing these principles. They will thus make an informed decision when implementing sustainable design methods.

The Gulf Cooperation Council (GCC) of countries has some of the highest electricity consumptions and carbon dioxide emissions per capita in the world. This poses a direct challenge to the GCC government’s ability to meet their CO₂ reduction targets. In this review paper the current household electricity consumption situation in the GCC is reviewed.

Three scenarios for reducing energy consumption and CO₂ emissions are proposed and evaluated using strengths, weaknesses, opportunities and threats (SWOT) as well as the political, economic, social, technical, legal and environmental (PESTLE) frameworks.

The first scenario found that using solar Photovoltaic (PV) or hybrid solar PV and wind system to power household lighting could save significant amounts of energy, based on lighting making up between 8% to 30% of electricity consumption in GCC households. The second scenario considers replacement of conventional appliances with energy-efficient ones that use around 20% less energy. The third scenario looks at influencing consumer behavior towards sustainable energy consumption.

Pilot trials of these scenarios are recommended for a number of households. Then the results and feedback could be used to launch the schemes GCC-wide.

The proposed scenarios are designed to encourage responsible electricity consumption and production within households (SDG12).

All three proposals are found viable for policymakers to implement. However, to ensure successful implementation GCC Governments are recommended to review all the opportunities and challenges associated with these schemes as laid out in this paper.

Recently, there has been a shift toward the embodied energy assessment of buildings. However, the impact of material service life on the life-cycle embodied energy has received little attention. We aimed to address this knowledge gap, particularly in the context of the UAE and investigated the embodied energy associated with the use of concrete and other materials commonly used in residential buildings in the hot desert climate of the UAE.

Using input–output based hybrid analysis, we quantified the life-cycle embodied energy of a villa in the UAE with over 50 years of building life using the average, minimum, and maximum material service life values. Mathematical calculations were performed using MS Excel, and a detailed bill of quantities with >170 building materials and components of the villa were used for investigation.

For the base case, the initial embodied energy was 57% (7390.5 GJ), whereas the recurrent embodied energy was 43% (5,690 GJ) of the life-cycle embodied energy based on average material service life values. The proportion of the recurrent embodied energy with minimum material service life values was increased to 68% of the life-cycle embodied energy, while it dropped to 15% with maximum material service life values.

The findings provide new data to guide building construction in the UAE and show that recurrent embodied energy contributes significantly to life-cycle energy demand. Further, the study of material service life variations provides deeper insights into future building material specifications and management considerations for building maintenance.

This study investigates the barriers and drivers of using green methods and technologies (GMTs) in supportive educational buildings (SEBs) in South Africa, and assesses their impact on the circular economy (CE) in achieving net-zero carbon goals. While there has been extensive literature on green building technologies, there is limited research on the barriers and drivers of using GMT in SEBs, as well as their impact on the circular economy (CE) in achieving net-zero carbon goals.

This study adopts an interpretivist approach with an ontological basis, using an overarching case study of a SEB at the University of Cape Town (UCT). Semistructured interviews were conducted with executive UCT management, and a field survey of a UCT supportive education building was performed.

At UCT, multiple GMTs have been installed across various buildings to enhance monitoring and management of water and energy consumption. Moreover, initiatives to positively influence student behavior, such as water and energy-saving campaigns around UCT premises, have been introduced. The findings further indicate that UCT has recently emphasized the implementation of GMTs, resulting in improved resource efficiency, CE practices and progress toward achieving net-zero carbon targets for supportive education buildings and the university as a whole.

This research highlights the positive impact of GMTs on a SEB’s CE and net-zero carbon operations. As a result, facility managers should consider incorporating GMTs when planning the development or refurbishment of SEBs.

Environmental degradation resulting from human activities may adversely affect human health in multiple ways. Until now, policies aimed at mitigating environmental problems such as climate change, environmental pollution and damage to biodiversity have failed to clearly identify and drive the potential benefits of these policies on health. The conducted study assesses and demonstrates how specific environmental policies and instruments influence perceived human health in order to ensure input for a data-driven decision process.

The study was conducted for the 2004–2020 period in European Union (EU) countries with the use of dynamic panel data modeling. Verification of specific policies' impact on dependent variables allows to indicate this their effectiveness and importance. As a result of the computed dynamic panel data models, it has been confirmed that a number of significant and meaningful relationships between the self-perceived health index and environmental variables can be identified.

There is a strong positive impact of environmental taxation on the health index, and the strength of this relationship causes effects to be observed in the very short term, even the following year. In addition, the development of renewable energy sources (RES) and the elimination of fossil fuels from the energy mix exert positive, although milder, effects on health. The reduction of ammonia emissions from agriculture and reducing noise pollution are other health-supporting factors that have been shown to be statistically valid. Results allow to identify the most efficient policies in the analyzed area in order to introduce those with the best results or a mix of such measures.

The results of the authors' research clearly indicate the health benefits of measures primarily aimed at improving environmental factors, such as environmental taxes in general. The authors have also discovered an unexpected negative impact of an increase in the share of energy taxes in total taxes on the health index. The presented study opens several possibilities for further investigation, especially in the context of the rapidly changing geopolitical environment and global efforts to respond to environmental and health challenges. The authors believe that the outcome of the authors' study may provide new arguments to policymakers pursuing solutions that are not always easily acceptable by the public.

Polyurethane (PUR) foam parts are traditionally manufactured using metallic molds, an unsuitable approach for prototyping purposes. Thus, rapid tooling of disposable molds using fused filament fabrication (FFF) with polylactic acid (PLA) and glycol-modified polyethylene terephthalate (PETG) is proposed as an economical, simpler and faster solution compared to traditional metallic molds or three-dimensional (3D) printing with other difficult-to-print thermoplastics, which are prone to shrinkage and delamination (acrylonitrile butadiene styrene, polypropilene-PP) or high-cost due to both material and printing equipment expenses (PEEK, polyamides or polycarbonate-PC). The purpose of this study has been to evaluate the ease of release of PUR foam on these materials in combination with release agents to facilitate the mulding/demoulding process.

PETG, PLA and hardenable polylactic acid (PLA 3D870) have been evaluated as mold materials in combination with aqueous and solvent-based release agents within a full design of experiments by three consecutive molding/demolding cycles.

PLA 3D870 has shown the best demoldability. A mold expressly designed to manufacture a foam cushion has been printed and the prototyping has been successfully achieved. The demolding of the part has been easier using a solvent-based release agent, meanwhile the quality has been better when using a water-based one.

The combination of PLA 3D870 and FFF, along with solvent-free water-based release agents, presents a compelling low-cost and eco-friendly alternative to traditional metallic molds and other 3D printing thermoplastics. This innovative approach serves as a viable option for rapid tooling in PUR foam molding.