Search results

The purpose of this study is to investigate the coupling effects of the velocity slip, rarefaction effect and effective viscosity of the gas film on the performance of the aerostatic guideway in micro-scale and improve the analysis precision of the static performance of aerostatic guideway.

The corresponding model of the gas film flow with consideration of the velocity slip, rarefaction effect and effective viscosity of the gas film in micro-scale is proposed. By solving the corresponding model, the bearing capacity and the stiffness of the aerostatic guideway are obtained through the pressure distributions of the air cavity. Through comparing the bearing capacity and the stiffness in different situations, the couple effects of the three factors are analyzed. Finally, the experimental results about the stiffness are obtained and the contrast between the simulation stiffness and the tested stiffness is achieved.

Through comparing the coupling effects of the micro scale factors under different conditions on the performance of the aerostatic guideway, it was found that when comparing the effects of a single factor, the effect of the first-order slip is the largest. When two factors are randomly combined, velocity slip and viscosity of the gas film is the largest, but these coupling effects are less than the effect of considering three factors simultaneously.

It is essential to consider the first-order velocity slip, the flow factor Q and the effective viscosity when analyzing the static performance of the aerostatic guideway in micro-scale. This makes studying the performance of the aerostatic guideway in micro-scale feasible and improves the machine’s accuracy.

The purpose of this paper is to apply a new modified homotopy perturbation method, which is effective to solve multi-order fractional equations with non-polynomial initial and boundary conditions.

The proposed algorithm is tested on multi-order fractional advection-dispersion equations. The fractional derivatives described in this paper are in the Caputo sense.

Approximate results explicitly reveal the complete reliability, efficiency and accuracy of the new modified technique.

It is observed that the approach may be implemented to other multi-fractional models with non-polynomial initial and boundary conditions.

Grey modeling technique is an important element of grey system theory, and academic articles applied to agricultural science research have been published since 1985, proving the broad applicability and effectiveness of the technique from different aspects and providing a new means to solve agricultural science problems. The analysis of the connotation and trend of the application of grey modeling technique in agricultural science research contributes to the enrichment of grey technique and the development of agricultural science in multiple dimensions.

Based on the relevant literature selected from China National Knowledge Infrastructure, the Web of Science, SpiScholar and other databases in the past 37 years (1985–2021), this paper firstly applied the bibliometric method to quantitatively visualize and systematically analyze the trend of publication, productive author, productive institution, and highly cited literature. Then, the literature is combed by the application of different grey modeling techniques in agricultural science research, and the literature research progress is systematically analyzed.

The results show that grey model technology has broad prospects in the field of agricultural science research. Agricultural universities and research institutes are the main research forces in the application of grey model technology in agricultural science research, and have certain inheritance. The application of grey model technology in agricultural science research has wide applicability and precise practicability.

By analyzing and summarizing the application trend of grey model technology in agricultural science research, the research hotspot, research frontier and valuable research directions of grey model technology in agricultural science research can be more clearly grasped.

Flexible mechanical gripper has better safety and adaptability than a rigid mechanical hand. At present, there are few soft grippers for small objects on a millimeter scale. Therefore, the purpose of this paper is to design a soft pneumatic gripper for grasping millimeter-scale small and fragile objects such as jewelry and electronic components.

By simulating the clamping action of the bird’s mouth and combining the high flexibility of the soft material, the bird’s beak soft pneumatic gripper is designed. First, the internal cavity of the gripping end of the gripper is determined by bending deformation calculation, and the brief manufacturing process of the gripper is outlined. Then, the single finger of the soft gripper is modeled mechanically, and the relationship between air pressure and bending deformation of the single finger is obtained. Finally, the experimental platform of the soft mechanical gripper is built, and the gripping performance of silicone rubber material is tested by comparison test, bending deformation test, stability test, adaptability test and gripping accuracy test.

The designed gripper has the advantages of simple structure, convenient operation, easy grasping of different small objects of millimeter-scale and good adaptability. It can grasp the precise dispensing needle with a minimum diameter of 0.19 mm, and its accuracy meets daily use.

A new type of soft pneumatic, the mechanical gripper is proposed and manufactured. According to the shape of the bird’s beak and the calculation of bending performance, a hollow finger gripper with better bending performance is designed. Various test results show that the gripper has a significant clamping effect on millimeter small objects, which supplements the research field of millimeter small object gripper.

The purpose of this paper is to examine the relationship between logistics park platforms, logistics location and operational performance. Relationship analysis helps managers respond to the changes that today’s logistics companies face, which include limited resources and facilities, market uncertainties and financial instabilities.

A structured questionnaire is developed based on the resource-based view. Qualitative data collected from 273 companies in China are used in a structural equation model to test the conceptual model.

In logistics parks, logistics park platforms and location positively influence companies’ resource integration, which is positively related to operational performance. While logistics park platforms can improve operational performance directly, logistics location cannot. Resource integration is thus a full mediator between logistics location and operational performance, while it is a partial mediator between logistics park platforms and operational performance.

This study fills a gap in the literature on logistics parks, particularly on the relationships among operational performance, resource integration, logistics park platforms and the location of logistics parks in China. The authors provide guidelines for logistics park managers to organize their resources and develop capabilities for improving the operational performance of companies in logistics parks.

As a new type of spinning machine, the jet spinning machine absorbs the carding system of the rotating cup spinning series and the nozzle part of the jet spinning. This paper aims to intends to introduce the double carding structure currently studied by the rotating cup spinning into the jet spinning machine, and analyze the influence of the nozzle characteristic number on the flow field in the double carding structure to verify the advantages of the double carding structure.

The simulation is used to evaluate the performance of single/double split jet spinning and nozzle feature number, verify the technical advantages of double split jet spinning and evaluate the influence of nozzle feature number on flow field. The influence of the nozzle characteristic number on the flow pattern in the four models is compared. The advantages and disadvantages of a conventional single comb and a double comb with a bypass channel on the longer side of the transport channel as an additional air supply channel are also evaluated.

At present, the double comb technology of rotary cup spinning is being studied at home and abroad to improve the spinning quality and improve the difficult problem of mixed yarn with large difference in processing fiber properties. At present, the jet spinning machine combines the advantages of rotary cup spinning and jet spinning, absorbing the comb system of rotary cup spinning series and the nozzle part of jet spinning. Therefore, it is found that the introduction of the double-split structure into the wool jet spinning has research value to improve the spinning quality.

The purpose of this paper is to refer to the previous research on the double comb structure in rotary spinning, and to apply the double comb structure in the new jet spinning machine to improve the spinning quality. The simulation is used to evaluate the performance of single/double split jet spinning and nozzle feature number, verify the technical advantages of double split jet spinning and evaluate the influence of nozzle feature number on flow field.

This paper comes to the point from the tax competition of local government in investment promotion and capital introduction. This paper aims to empirically examine the internal mechanism of enterprises obtaining land resources from local government and its resulting equity investment increase and economic consequences of overinvestment.

The data of China’s A-share listed companies from 2007 to 2014 were used to test the relationship between the increase in enterprise equity investment and the acquisition of land resources and overinvestment. The descriptive statistics, correlation analysis and least squares linear regression were used to solve the above question.

One of the reasons for the enterprise equity increase is to obtain scarce land resources. The enterprise acquisition for land resources leads to overinvestment. The equity investment increase from obtaining land resources will further stimulate enterprise group to overinvest.

The authors could not get the actual data of land that subsidiaries have obtained directly. In this research, the authors get the data using consolidated statements and subsidiary statements indirectly.

The results make contributions to the influencing factors and economic consequence of the enterprise investment structural deviation.

It provides reference to optimize the “interaction” relationship between government and enterprises.

It identified the “dual-channel” conduction mechanism between land resource acquisition and enterprise overinvestment.

The aim of this study was to analyze the effects of carbon reduction efforts and preservation efforts on system benefits in the cold chain industry of fresh products.

This study develops an optimal decision game model for the fresh products in the cold chain, incorporating the retailer's preservation effort and the supplier's carbon emission reduction effort. It quantifies the relationship between carbon emission reduction effort, preservation effort and system profit. The model considers parameters like carbon trading price, consumer low-carbon preference and consumer freshness preference, reflecting real-world conditions and market trends. Numerical simulations are conducted by varying these parameters to observe their impact on system profit.

Under the carbon cap-and-trade policy, the profit of the fresh cold chain system is higher than that of the fresh cold chain system without carbon constraints, and the profit of the supplier under decentralized decision-making is increased by nine times in the simulation results. The increase in carbon trading prices can effectively improve the freshness level of fresh products cold chain, carbon emission reduction level and system profit.

This study comprehensively considers the factors of freshness and carbon emission reduction, provides the optimal low-carbon production decision-making reference for the fresh food cold chain and promotes the sustainable development of the fresh food cold chain.

The purpose of this paper is to provide a comprehensive review and critique of what we already know about pay systems in Chinese state‐owned enterprises, to identify the gaps in the literature and to stimulate more research in this area.

The paper first describes the policy issues at the macro‐level (government policies) in order to put micro‐level pay practices in a pertinent context. Then the paper provides a detailed review and critique on current empirical studies on pay practices in Chinese enterprises, their antecedents and consequences. Finally, the paper identifies potential research questions and provides some directions for future research.

The paper concludes from the extensive review of the current literature that the following research areas merit attention: Why do some firms pay their employees more than other firms? Why do we observe different types of internal pay structures among firms? What are the consequences of these different structures? Why is the link between pay and performance weak in some firms but strong in others? Under what conditions pay‐for‐performance enhances firm performance?

The paper is one of the most comprehensive reviews of the literature on compensation practices of Chinese companies.

The purpose of this paper is to investigate the effect of welding procedure on the corrosion behaviors of weathering steel 09CuPCrNi in marine atmospheric environment. The corrosion processes of weathering steel 09CuPCrNi and its welded joints in marine atmospheric environment were simulated by a salt spray dry-wet test.

The corrosion behaviors of the base metal and the welded joints at corrosion times of 2, 4, 8, 12, 24 weeks were investigated by weight loss test, electrochemical techniques, scanning electron microscope (SEM) and electron probe micro-analyzer (EPMA). The corrosion rates, as well as the morphologies and electrochemical characteristics of corrosion products, the distribution of major alloying elements in rust layer were obtained. The influence of welding on the atmospheric corrosion of 09CuPCrNi was studied.

The results indicate that the corrosion rate of the 09CuPCrNi welded joints decreases gradually with the corrosion time, and the major alloying elements are enriched in the inner rust layer, which are similar to that of the base metal. In the early stage during the corrosion process, the welded joints with inhomogeneous structure show the poorer corrosion resistance than that of the base metal. However, it looks the opposite way around in the late corrosion stage, when the uniform corrosion products with even thickness of the base metal tend to detach from the substrate easier and earlier and resulting in cracks, which increase the corrosion rate comparatively with that of the welded joints.

09CuPCrNi low alloy steel is a kind of typical weathering steel developed in China which is similar to Corten A developed by USA. Nowadays, 09CuPCrNi low alloy steel is widely adopted in many fields which require welding processes. In the past years, the research of weathering steel welded joints was mainly concentrated on the strength, toughness and weldability. Less work has been done to investigate the difference of corrosion evolution and characteristics between the base metal and its welded joints. Thus, the main objective of the present work was to analyze the influence of welding on the atmospheric corrosion.