Search results

This study aims to provide a review for scour in complex rivers and streams with coarser bed material, steep longitudinal bed slopes and dynamic environments, in the interest of the safety and the economy of hydraulic structures. The knowledge of scour in such geographical complexities is very crucial for a comprehensive understanding of scour failures and for establishing definitive criteria to bridge this major research gap.

The existing available literature shows significant work done in case of silt, sand and small sized coarser bed material but any substantial work for bed material of gravel size or above is lacking, resulting in a wide gap. Though some researchers have attempted to explore possibilities of refining the existing models by adding pier size, shape, sediment non-uniformity and armouring effects, which otherwise have been given a miss by the various researchers, including the pioneer in the field Lacey–Inglis (1930). But still, a rational model for scour estimation in such complex conditions for global use is yet to come. This is because all the parameters governing the scour have not been studied properly till date as is evident from the globally available literature and is witnessed in the field too, in recurrent failure of hydraulic structures especially bridges.

The researchers presume that the finer materials move only as a result of erosion. However, in actual field conditions, it has been observed that the large-sized stones also roll down and cause huge erosion along the river bed and damage the hydraulic structures, especially in the steep river/stream beds along hilly slopes. This fact has been overlooked in the models available globally and has been highlighted only in the current work in an attempt to recognize this major research gap. A study carried out on a number of streams globally and in Jammu and Kashmir, India also, has shown that in steep river and stream beds with bed material consisting of gravel size or greater than gravel, large scour holes ranging from 1 m to 5 m were created by furious floods, and due to other unknown forces along the channel path and near foundations of hydraulic structures.

To the best of the authors’ knowledge, this work is purely original.

The purpose of this paper is to propose a new combined finite-discrete element method (FDEM) to analyze the mechanical properties, failure behavior and slope stability of soil rock mixtures (SRM), in which the rocks within the SRM model have shape randomness, size randomness and spatial distribution randomness.

Based on the modeling method of heterogeneous rocks, the SRM numerical model can be built and by adjusting the boundary between soil and rock, an SRM numerical model with any rock content can be obtained. The reliability and robustness of the new modeling method can be verified by uniaxial compression simulation. In addition, this paper investigates the effects of rock topology, rock content, slope height and slope inclination on the stability of SRM slopes.

Investigations of the influences of rock content, slope height and slope inclination of SRM slopes showed that the slope height had little effect on the failure mode. The influences of rock content and slope inclination on the slope failure mode were significant. With increasing rock content and slope dip angle, SRM slopes gradually transitioned from a single shear failure mode to a multi-shear fracture failure mode, and shear fractures showed irregular and bifurcated characteristics in which the cut-off values of rock content and slope inclination were 20% and 80°, respectively.

This paper proposed a new modeling method for SRMs based on FDEM, with rocks having random shapes, sizes and spatial distributions.

This study aims to develop cause-and-effect relationships among the critical success factors (CSFs) of fintech adoption and rank these CSFs based on their importance in the model.

To achieve the objectives of the study, the Fuzzy Decision-Making Trial and Evaluation Laboratory (FDEMATEL) approach was used. The data was collected from 16 experts using a questionnaire.

The findings demonstrated the interrelationships among the CSFs. In total, 16 critical factors were recognized as causal factors, and the remaining eight were considered effect factors. The CSFs were ranked based on their importance in fintech adoption.

This study is novel as it investigates CSFs of fintech adoption using FDEMATEL, and it contributes to understanding the nature of these factors and how they affect fintech adoption. The findings propose a significant basis to deepen fintech adoption and deliver a clue to design a practical framework for fintech adoption.

Despite the opportunities of digital twins (DTs) for smart buildings, limited research has been conducted regarding the facility management stage, and this is explained by the high complexity of accurately representing and modelling the physics behind the DTs process. This study thus organises and consolidates the fragmented literature on DTs implementation for smart buildings at the facility management stage by exploring the enablers, applications and challenges and examining the interrelationships amongst them.

A systematic literature review approach is adopted to analyse and synthesise the existing literature relating to the subject topic.

The study revealed six main categories of enablers of DTs for smart building at the facility management stage, namely perception technologies, network technologies, storage technologies, application technologies, knowledge-building and design processes. Three substantial categories of DTs application for smart buildings were revealed at the facility management stage: efficient operation and service monitoring, efficient building energy management and effective smart building maintenance. Subsequently, the top four major challenges were identified as being “lack of a systematic and comprehensive reference model”, “real-time data integration”, “the complexity and uncertainty nature of real-time data” and “real-time data visualisation”. An integrative framework is finally proposed by examining the interactive relationship amongst the enablers, the applications and the challenges.

The findings could guide facility managers/engineers to fairly understand the enablers, applications and challenges when DTs are being implemented to improve smart building performance and achieve user satisfaction at the facility management stage.

This study contributes to the knowledge body on DTs by extending the scope of the existing studies to identify the enablers and applications of DTs for smart buildings at the facility management stage and the specific challenges.

The authors aim to develop a conceptual framework for longitudinal estimation of stress-related states in the wild (IW), based on the machine learning (ML) algorithms that use physiological and non-physiological bio-sensor data.

The authors propose a conceptual framework for longitudinal estimation of stress-related states consisting of four blocks: (1) identification; (2) validation; (3) measurement and (4) visualization. The authors implement each step of the proposed conceptual framework, using the example of Gaussian mixture model (GMM) and K-means algorithm. These ML algorithms are trained on the data of 18 workers from the public administration sector who wore biometric devices for about two months.

The authors confirm the convergent validity of a proposed conceptual framework IW. Empirical data analysis suggests that two-cluster models achieve five-fold cross-validation accuracy exceeding 70% in identifying stress. Coefficient of accuracy decreases for three-cluster models achieving around 45%. The authors conclude that identification models may serve to derive longitudinal stress-related measures.

Proposed conceptual framework may guide researchers in creating validated stress-related indicators. At the same time, physiological sensing of stress through identification models is limited because of subject-specific reactions to stressors.

Longitudinal indicators on stress allow estimation of long-term impact coming from external environment on stress-related states. Such stress-related indicators can become an integral part of mobile/web/computer applications supporting stress management programs.

Timely identification of excessive stress may improve individual well-being and prevent development stress-related diseases.

The study develops a novel conceptual framework for longitudinal estimation of stress-related states using physiological and non-physiological bio-sensor data, given that scientific knowledge on validated longitudinal indicators of stress is in emergent state.

This study aims to investigate the behavior of different types of stone columns, including the short and floating columns, as well as the ordinary and the geosynthetic encased stone columns (OSC and GESC). The effectiveness of the geosynthetic encasement and the impact of the installation using the lateral expansion method on the column performance is evaluated through a three-dimensional (3D) unit cell numerical analysis.

A full 3D numerical analysis is carried out using the explicit finite element code PLAXIS 3D to examine the installation influence on settlement reduction (ß), lateral displacement (U_x) and vertical displacement (U_z) relative to different values of lateral expansion of the column (0% to 15%).

The findings demonstrate the superior performance of GESC, particularly short columns outperforming floating counterparts. This enhanced performance is attributed to the combined effects of geosynthetic encasement and increased lateral expansion. Notably, these strategies contribute significantly to decreasing lateral displacement (U_x) at the column’s edge and reducing vertical displacement (U_z) under the rigid footing.

In contrast to previous studies that examined the installation effect of OSC contexts, this paper presents a comprehensive investigation into the effect of geosynthetic encasement and the installation effects using the lateral expansion method in very soft soil, using 3D numerical simulation. The study emphasizes the significance of the consideration of geosynthetic encasement and lateral expansion of the column during the design process to enhance column performance.

Many waste-to-energy (WTE) plants are constructed and operated using the public-private partnership (PPP) mode in China. However, risk events of PPP WTE incineration projects sometimes occur. This study aims to clarify the relationship of risks in China's PPP WTE incineration projects and identify the key risks accordingly and risk transmission paths.

A risk list of PPP WTE incineration projects was obtained based on literature analysis. Moreover, a hybrid approach combining fuzzy sets, decision-making trial and evaluation laboratory (DEMATEL) and interpretive structural modeling (ISM) was developed to analyze the causality of risks, explore critical risks and reveal the risk transmission paths. The quantitative analysis process was implemented in MATLAB.

The results show that government decision-making risk, government credit risk, government supervision behavior risk, legal and policy risk, revenue and cost risk and management capacity risk are the critical risks of PPP WTE incineration projects in China. These critical risks are at different levels in the risk hierarchy and often trigger other risks.

Currently, there is a lack of exploration on the interaction between the risks of PPP WTE incineration projects. This study fills this gap by examining the key risks and risk transfer pathways of PPP WTE incineration projects from the perspective of risk interactions. The findings can help the public and private sectors to systematically understand the risks in PPP WTE incineration projects, thus enabling them to identify the risks that need to be focused on when making decisions and to optimize risk prevention strategies. The proposed hybrid approach can offer methodological ideas for risk analysis of other types of PPP projects.

This study aims to conduct a bibliometric analysis on “intertemporal choice” behavior of individuals from journals in the Scopus database between 1957 and 2023. The research covered the data on the said topic since it first originated in the Scopus database and carried out performance analysis and content analysis of papers in the business management and finance disciplines.

Bibliometric analysis, including science mapping and performance analysis, followed by content analysis of the papers of identified clusters, was conducted. Three clusters based on cocitation analysis and six themes (three major and three minor) were identified using the bibliometrix package in R studio. The content analysis of the papers in these clusters and themes have been discussed in this study, along with the thematic evolution of intertemporal choice research over the period of time, paving a way for future research studies.

The review unpacks publication and citation trends of intertemporal choice behavior, the most significant authors, journals and papers along with the major clusters and themes of research based on cocitation and degree of centrality and relevance, respectively, i.e. discounting experiments and intertemporal choice, impulsivity, risk preference, time-inconsistent preference, etc.

Over the past years, the research on “intertemporal choice” has flourished because of the increasing interest of researchers and scholars from different fields and the dynamic and pervasive nature of this topic. The well-developed and scattered body of knowledge on intertemporal choice has led to the need of applying a bibliometric analysis in the intertemporal choice literature.

Higher productivity in the potato value chain in Rwanda requires good quality seed potatoes. The article analyzes how innovations were introduced in the framework of a development project resulting in a partnership between a firm and two educational institutions to produce better seed potatoes, using the Triple Helix approach.

In the Triple Helix model government, academia and the private sector work together to develop and introduce innovations. This led to producing and introducing improved seed potatoes at an affordable price through a public private partnership (PPP). Interviews with experts and a survey of local producers were carried out to identify factors influencing the success of the partnership.

A Service, Training and Innovation Center (STIC) has been created to produce the first clean potato seeds in Africa on a commercial scale, based on cultivation of in vitro potato plantlets and aeroponics to produce mini-tubers. It is called Seed Potato Advancement Centre, an education–enterprise partnership, using these plantlets to produce mini-tubers through aeroponics. Seed multipliers are responsible for the next three stages of seed multiplication. The final product is the certified potato, sold to ware potato farmers. The availability of disease-free seed potatoes in Rwanda gives a boost to the potato value chains and contributes to food security. The partnership was successful because of the support from the government and donors, with the private sector and the extension services helping to implement the innovations effectively.

The limitation is that the number of experts interviewed is limited and the survey did not only deal with potato-related activities. The focus is on one region only, but the most important potato growing area in Rwanda.

STICs function as a tool for cooperation between government, private sector and the knowledge sector to achieve commercial and development goals. They function as a channel for technology transfer. They allow applied research, including agronomic research; information collection; and dissemination, networking, training, organization of outreach activities. The model can be repeated in other sectors and countries.

The paper looks at a PPP in agriculture with educational institutions. Second, the Triple Helix and value chain literature is used to study the introduction and implementation of appropriate innovations, while factors determining the success of the partnership were identified. This concerns the first production of clean seed potatoes in Africa on a commercial scale.

The purpose of this paper is to investigate user satisfaction with digital health solutions by identifying and prioritizing different service attributes on the basis of their impact on improving user satisfaction.

Through a literature review and interviews with health professionals and patients, 20 attributes of digital health services provided in Italy have been identified. User satisfaction with these attributes has been evaluated by adopting the Kano model’s continuous and discrete analyses.

The findings reveal the essential attributes of digital health services that meet users' expectations, identify the attributes that users appreciate or dislike having and highlight unexpected attributes that lead to a significant boost in satisfaction when provided.

This study demonstrates the efficacy of the Kano model in assessing the nonlinear correlation between user satisfaction and the quality of digital health services, thus contributing to fill a gap in the literature in this area. The main limitation of this work is the use of a non-probabilistic sampling method.

This research suggests healthcare institutions and organizations consider user preferences when designing digital health solutions to increase their satisfaction. The results indicate different effects on user satisfaction and dissatisfaction for different categories of attributes in the Italian context.

Previous works studied customer satisfaction with digital health, assuming a linear relationship with service quality, or investigated consumer adoption intentions focusing on the technological factors. This work advances available knowledge by analyzing the nonlinear relationship between digital health attributes and users’ satisfaction and dissatisfaction.