Search results

This study aims to investigate the behavior of different types of stone columns, including the short and floating columns, as well as the ordinary and the geosynthetic encased stone columns (OSC and GESC). The effectiveness of the geosynthetic encasement and the impact of the installation using the lateral expansion method on the column performance is evaluated through a three-dimensional (3D) unit cell numerical analysis.

A full 3D numerical analysis is carried out using the explicit finite element code PLAXIS 3D to examine the installation influence on settlement reduction (ß), lateral displacement (U_x) and vertical displacement (U_z) relative to different values of lateral expansion of the column (0% to 15%).

The findings demonstrate the superior performance of GESC, particularly short columns outperforming floating counterparts. This enhanced performance is attributed to the combined effects of geosynthetic encasement and increased lateral expansion. Notably, these strategies contribute significantly to decreasing lateral displacement (U_x) at the column’s edge and reducing vertical displacement (U_z) under the rigid footing.

In contrast to previous studies that examined the installation effect of OSC contexts, this paper presents a comprehensive investigation into the effect of geosynthetic encasement and the installation effects using the lateral expansion method in very soft soil, using 3D numerical simulation. The study emphasizes the significance of the consideration of geosynthetic encasement and lateral expansion of the column during the design process to enhance column performance.

Covering a fiber-reinforced concrete column (fiber reinforced plastic (FRP)) improves the performance of the column primarily. The purpose of this paper is to investigate the behavior of small FRP concrete columns that are subject to axial pressure loading, in order to study the effect of many parameters on the effectiveness of FRP couplings on circular and square concrete columns.

These parameters include the shape of the browser (circular and square), whole core and cavity, square radius of square columns, concrete strength (low strength, normal and high), type of FRP (carbon and glass) and number of FRP (1–3) layers. The effective fibrillation failure strain was investigated and the effect of effective lateral occlusion pressure.

The results of the test showed that the FRP-coated columns improved significantly the final conditions of both the circular and square samples compared to the unrestricted columns; however, improvement of square samples was not as prominent as improvement in circular samples. The results indicated that many parameters significantly affected the behavior of FRP-confined columns. A new model for predicting compressive force and the corresponding strain of FRP is presented. A good relationship is obtained between the proposed equations and the current experimental results.

The average hoop strain in FRP wraps at rupture in FRP-confined concrete specimens can be much lower than that given by tensile coupon tests, meaning the theoretical assumption that the FRP-confined concrete cylinder ruptures when the FRP material tensile strength attained at its maximum is not suitable. Based on this observation, the effective peak strength and corresponding strain formula for FRP concrete confined columns must be based on the effective hoop rupture strain composite materials.

The article discusses phonetic retrieval of written names or words in computer systems. It deals briefly with the two established coding techniques of Davidson and Soundex, and an improved method called Phonix. Phonetic coding is performed on full words, with the ending sounds of words having special significance during the search process which results in likely, less likely, least likely categories of matches. Phonix has been tested, within the URICA library package, on bibliographic databases where it has been used as a secondary method of retrieval after failure of an initial search.

The purpose of this paper is to describe a successful model of shared medical leadership within an academic division of an urban children’s hospital.

Experience and outcomes were tracked over a three-year period during which two physicians shared the role of interim division chief of pediatric endocrinology and diabetes, resulting in a working model of shared leadership.

An evolutionary trajectory occurred over three years in which the strengths of the leaders were combined to optimize decision making in a complex medical division. Improvements in team satisfaction and additional positive outcomes were achieved.

Benefits of and challenges tackled by the strategic approach to shared leadership are identified to inform other medical institutions, particularly those with many team members or combined programs that include strong clinical and research components.

Little has been written within medical literature regarding shared leadership. The shared leadership model described in this paper can be implemented by others in a complex academic setting and will hopefully lead to more robust divisions.

This chapter is part of a larger project that examines recent educational expansion efforts in the Republic of Trinidad and Tobago, a nation that provides a valuable case study of challenges shaping higher educational expansion efforts in developing countries. The initial goal of the project was to identify supply and demand issues in postsecondary training. Though we did not collect data with the intent to examine neo-institutional or status competition dynamics, this theme emerged inductively from a series of interviews conducted with individuals and focus groups, making it an ideal case study for this volume.

Studies on the performance of agribusiness cooperatives in Brazil focus on economic and financial aspects. The purpose of this paper is to further delve into such studies by investigating which commonly measurable structural production factors (horizontal, vertical and lateral diversification; operating area; number of associates; and time in operation) have greater impacts on the financial performance of such cooperatives.

To achieve such a goal, a survey was conducted with a sampling pool divided by size (annual net revenues of US$ 50 million or higher), and the questionnaire was employed as a method of data collection. The sample was concentrated in the southern, south-eastern and mid-western regions of Brazil; classified by size; and deemed adequate after several adequacy tests.

The results were analysed using Spearman’s correlation, which showed that there were no significant correlations between the structural production factors considered in this study and the economic-financial performance of agricultural cooperatives, which leads to questions about the effectiveness of employing diversification strategies with a conjoint approach. Nonetheless, it was possible to identify several relationships not mentioned in the original hypotheses that might be addressed further in future studies.

The data obtained should be interpreted with caution because heteroscedasticity was detected. Although the cause could not be clearly identified, the presence of heteroscedasticity could mean that smaller and similar cooperatives present similar variation in their diversification and production base strategies.

This work sought to generate knowledge regarding operations management, which was achieved by demonstrating that production diversification in a dynamic and relevant economic sector, that is, agricultural cooperatives, is limited in terms of financial return when performed in an isolated mode. Hence, cooperatives’ production managers should take into account the totality of structural production factors during their planning activities.

The present research was envisaged with an aim to optimize the system and the product responses for the development of tomato pomace-incorporated corn-based extrudates employing central composite rotatable design and determine its proximate, lycopene, consumer acceptability and storage studies.

Lycopene-rich extrudates were developed from corn flour blended with different levels of tomato pomace. The independent extrusion variables, namely, feed composition (95:5 to 75:25), feed moisture (12–20%), screw speed (200–600 rpm) and barrel temperature (125–185 °C), were studied to determine their influence on dependent variables, namely, specific mechanical energy, hardness, water solubility index, lateral expansion, water absorption index, bulk density and color.

All of the quality parameters were significantly (p < 0.05) influenced by independent variables. The regression models obtained for all the responses showed high coefficients of determination (R2 = 0.85–0.95). The optimum conditions for the development of tomato pomace-incorporated corn-based extrudates were feed composition (90:10), feed moisture (14%), screw speed (300 rpm) and barrel temperature (170 °C). The moisture, fat and carbohydrate contents of the extrudates were significantly reduced, whereas protein, ash and fiber were significantly (p < 0.05) enhanced after the incorporation of tomato pomace. Aluminum laminates were found to be the suitable packaging materials for extrudates for a period of 120 days in comparison to high-density polyethylene packages.

As far as the authors could possibly know, scanty literature exists wherein the tomato pomace has been utilized for the development of lycopene-rich corn-based extruded snacks. Such extrudates with significantly higher fiber and lycopene contents than corn flour will serve as a suitable alternative for the development of shelf-stable ready-to-eat extruded snacks.

A description of an experimental investigation of a round air jet projected parallel to a wall and the resulting velocity profiles, maximum velocity decay and the rate of jet growth. This paper concerns an experimental investigation of a round air jet projected parallel to a wall. Experiments were carried out to establish the shape of the velocity profiles, the decay of maximum velocity and the rate of growth of the jet. The results are compared with Tollmien's theory for the free jet. All data are presented in a form readily available for design purposes.

The purpose of this paper is to mainly review the state-of-the-art developments in the field of hydrodynamics of offshore pipelines, identifying the key tools for analysis of pipeline free spans, their applications, their qualifying characteristics and capabilities and limitations.

These different analytical, numerical and semi-empirical tools available for predicting such hydrodynamic loads and their effects include VIVANA, PIPESIN, VIVSIM, SIMULATOR, FATFREE, amongst others. Inherent in these models are current effects, wave effects and/ or pipe–soil interactions.

Amongst these models, the most attention was given to the new VIVANA model because this model take into account the vortex-induced effects with respect to free-spanning pipelines (which have dominant effect in the span analysis in deep water) better than other semi-empirical models (such as Shear 7). Recent improvements in VIVANA include its ability to have arbitrary variation in speed and direction of current, as well as the ability for calculation of pure IL and combined IL-CF response. Improvements in fatigue assessments at free spans, i.e. pipe–soil interaction have been achieved through the combined frequency domain and non-linear time domain analysis methodology adopted. Semi-empirical models are still the de facto currently used in the design of free-spanning pipelines. However, there is need for further research on free-span hydrodynamic coefficients and on how in-line and cross-flow vibrations interact. Again, there is still the challenge due to VIV complexity in fully understanding the fluid structure interaction problem, as there is no consolidated procedure for its analysis. It has been observed that there is large scatter between the different codes adopted in the prediction of fatigue damage, as there lacks full-scale test data devoted to determination/validation of the coefficients used in the semi-empirical models. A case study of the preliminary design of a typical 48 in. pipeline has been presented in this study to demonstrate the use of the free-span analysis tool, DNV RP F105. Excel spreadsheet has been applied in the execution of formulas.

This review paper is the first of its kind to study the state-of-the-art development in pipeline free-span analysis models and demonstrate the use of analysis tool, DNV for MAFSL calculation. Hence, information obtained from this paper would be invaluable in assisting designers both in the industry and academia.