Search results

This study aims to analyze co-flowing jets (CFJs) with constant velocity ratio (VR) and varying primary nozzle lip thickness (LT) to find a critical LT in CFJs below which mixing enhances and beyond which mixing inhibits.

CFJs were characterized with a constant VR and varying LTs. A single free jet with a diameter equal to that of a primary nozzle of the CFJ was used for characteristic comparison. Numerical simulation is carried out and is validated with the experimental results.

The results show that within a critical limit, the mixing enhanced with an increase in LT. This was signified by a reduction in potential core length (PCL). Beyond this limit, mixing inhibited leading to the elongation of PCL. This limit was controlled by parameters such as LT and constant VR. A new region termed as influential wake zone is identified.

In this study, the VR is maintained constant and bypass ratio (BR) was varied from low value to very high values. Presently, subsonic commercial turbo fan operates under low to ultra-high BR. Hence the present study becomes vital to the current scenario.

To the best of the authors’ knowledge, this is the first effort to find the critical value of LT for a constant VR for compressible co-flow jets. The CFJs with constant VR and varying LT have not been studied in the past. The present study focuses on finding a critical LT below which mixing enhances and above which mixing inhibits.

Subsonic commercial aircraft operate with turbo-fan engines that operate with moderate bypass ratio (BR) co-flowing jets (CFJ). This study aims to analyse CFJ with constant BR 6.3 and varying primary nozzle lip thickness (LT) to find a critical LT in CFJ below which mixing enhances and beyond which mixing inhibits.

CFJ were characterized with a constant BR of 6.3 and varying lip thicknesses. A single free jet with a diameter equal to that of a primary nozzle of the co-flowing jet was also studied for comparison.

The results show that within a critical limit, the mixing enhanced with an increase in LT. This was signified by a reduction in potential core length (PCL). Beyond this limit, mixing inhibited leading to the elongation of PCL. This limit was controlled by parameters such as LT and magnitude of BR.

The BR value of CFJ in the present study was 6.3. This lies under the moderate BR value at which subsonic commercial turbofan operates. Hence, it becomes impervious to study its mixing behavior.

This is the first effort to find the critical value of LT for a constant BR for compressible co-flow jets. The CFJ with moderate BR and varying LT has not been studied in the past. The present study focuses on finding a critical LT below which mixing enhances and above which mixing inhibits.

The purpose of this study is to analyse numerically and experimentally the effects of lip thickness (LT) and bypass ratio on co-flowing nozzle under subsonic and correctly expanded sonic jet decay at different Mach numbers.

Co-flowing jets from co-flowing nozzles of different LTs, 0.2, 1 and 1.5 Dp (where Dp is the primary nozzle exit diameter = 10 mm), with an annular gap of 10 mm at main jet exit Mach numbers 0.6 have been studied experimentally and the other cases have been performed numerically. The co-flowing jet with 2 mm LT was used for comparison.

Co-flowing jet axial pitot pressure decay, axial static pressure decay, axial velocity decay, radial velocity decay and streamline velocity contours were analyzed. The results illustrate that the mixing of the co-flowing jet with profound LT is prevalent to the co-flowing jet with 2 mm LT, at all Mach numbers of the current study. Also, the LT of the co-flowing jet has a strong impact on jet mixing. Co-flowing jets with 10 mm and 15 mm LT with a constant co-flow width of 10 mm experience a considerably advanced mixing than co-flowing jets with 2 mm LT and a co-flow width of 10 mm.

The application of bypassed co-flow jet is in turbofan engine operates efficiently in modern civil aircraft.

All subsonic jets are considered correctly expanded with negligible variation in axial static pressure. However, in the present study, static pressure along the centerline varies sinusoidally up to 9% and 12% above and below atmospheric pressure, respectively, for primary jet exit Mach number 1.0. The sinusoidal variation is less for primary jet exit Mach numbers 0.6 and 0.8 in static pressure decay.

This paper aims to present the jet mixing effectiveness of triangular tabs with semi-circular corrugations to control the subsonic and sonic correctly expanded jets.

Three semi-circular corrugated triangular tabs (Tab A, Tab B and Tab C) of equal blockage 5.11% are used, in which the corrugation locations on the tabs are varied. The offset distance between the semi-circular corrugations at the leaned edges of the triangular tabs are 0.0, 0.75 and 1.5 mm for the Tabs A, B and C, respectively. Two identical semi-circular corrugated tabs has been placed exactly 180° apart at the exit of the convergent nozzle. The pitot pressure measurements were taken to study the jet mixing characteristics of the tabs for the jet exit Mach numbers of 0.6, 0.8 and 1.0, and it is compared with the free jet.

The jet centerline pitot pressure decay reveals that, Tab A is very effective than Tab B and Tab C. For the jet exit Mach numbers of 0.6, 0.8 and 1.0, the potential core reduction for the Tab A is found to be 69.1%, 69.7% and 70.8%, respectively, when compared with the free jet.

The semi-circular corrugated triangular tabs were found to be more effective than the plain triangular tabs of equal blockage ratio for reducing the core length with minimum thrust loss.

The offset distance of the semi-circular corrugations are varied along the leaned sides of the triangular tabs, which is the novelty of this study.

The purpose of this study is to understand experimentally the mixing characteristics of a two-stream exhaust system with a supersonic Mach 1.5 primary jet that exits the rectangular C-D nozzle surrounded by a sonic secondary jet from a convergent rectangular nozzle by varying the aspect ratio (AR = 2 and 3) similar to those that can be available for future high-speed commercial aircraft.

This paper focuses on the experimental results of effects of AR at various expansion levels of jets issued/delivered from a central rectangular convergent-divergent nozzle of AR 2 and 3 surrounded by a coflow from a convergent rectangular sonic nozzle. The lip thickness of the primary nozzle is 2.2 mm. various nozzle pressure ratios (NPRs) ranging from 2, 3, 3.69 and 4 were chosen for pressure measurements.

For all the NPRs, AR 3 had a shorter core than AR 2. Also, AR 3 was found to decay faster in the transition and fully developed zones. The lateral plots show that the AR has an influence on the jet spread.

The structure of waves existing in the potential core of the rectangular coflow jet along with the major and minor axis planes was visualized by the shadowgraph technique.

The purpose of this paper is to offer a reflexive account of the co‐production of a qualitative research project with the aim of illuminating the relationships between research participants.

The paper draws upon personal experience of designing and conducting a research project into management learning, run jointly between an academic and a senior practitioner. The methodological issues involved and the reflexive dynamics of how the work of research collaboration is accomplished are considered.

Engaging with radical reflexivity helps to produce insights about the co‐production process.

This paper contributes to the field of reflexivity and is innovative in its context of academic‐practitioner research.

The term Canterbury Sound emerged in the late 1960s and early 1970s to refer to a signature style within psychedelic and progressive rock developed by bands such as Caravan and Soft Machine as well as key artists including Robert Wyatt and Kevin Ayers. This chapter explores Canterbury as a metaphor and reality, a symbolic space of music inspiration which has produced its distinctive ‘sound’.

Drawing on ethnographic fieldwork, particularly observations and interviews with music artists and cultural intermediates (Bourdieu, 1993), we suggest that the notion of the Canterbury Sound – with its affinity for experimentation, distinctive chord progressions and jazz allusions in a rock music format – is perceived as a continuing artistic and aesthetic influence. We interpret the genealogy of the Canterbury Sound alternativity through discussions focused on the position of the ‘Sound’ within contemporary heritage discourses, the metaphorical and geographical implications of place in relation to popular music, and cultural longevity of the phenomenon.

Control over large-scale coherent structures and stream-wise vortices lead to enhanced entrainment/conservation of the jet which is desirable for most free jet applications such as design of combustion chamber in jet engines and flame length elongation of welding torch used for metal cutting.

A co-flow nozzle with lip thickness of 2 mm, between the primary (inner) and secondary (outer) flow, is selected. Three nozzle combinations are used, i.e. C–C (circle–circle), C–E (circle–ellipse) and C–S (circle–square) for acquiring comparative data. For these nozzle combinations, inner nozzle exit plane is kept as a circle, whereas the outer nozzle exit planes are varied to circle, ellipse and square. The exit plane area of outer nozzle for the nozzle combinations has equivalent diameter, D_e. The nozzles are fabricated in a way that the outer nozzle can be rotated along the longitudinal axis, keeping the inner nozzle intact.

The C–C nozzle combination is effective in low Mach number regime in decaying the jet, when the rotational component is introduced. Around 30% reduction in the jet core length is observed for the C–C nozzle combinations without any lip. The C–E nozzle shows sedative result in decaying or preserving the jet. The C–S nozzle combination shows interesting phenomenon, whereby the low subsonic case tends to conserve the jet by 15% and the higher subsonic case tends to decay the jet by 10%.

The developed nozzle systems show both conservative and destructive effect on the jet, which is desirable for the mentioned applications.