Search results

Traditionally, many manufacturers of cost intensive capital goods have largely focused on design, realization and distribution of high‐quality products. Meanwhile, their industrial customers increasingly expect to be provided with diverse services. These services predominantly aim at enhancing the functional and the economical performance of the underlying products. To systematically exploit the potential of services, an appropriate combination of products and services becomes crucial. For achieving desired benefits for both manufacturers and their industrial customers, product‐service systems (PSS) have to be configured systematically. This paper aims to address these issues.

The presented approach considers customer, manufacturer and product life cycle specific aspects within the configuration of PSS. The paper presents a framework which comprises all activities necessary to conduct a systematic configuration of PSS. Throughout the paper, an elementary case study illustrates the activities.

Exemplary use cases indicate that the configuration of PSS using the presented approach is beneficial.

The case study is a success. However, especially the increasing complexity of modern capital goods demands for developing a suitable application software that supports the configuration.

The paper presents a successful application for conducting a customer, manufacturer and product life cycle‐oriented configuration of PSS.

Product-service system (PSS) has been attracting attentions of global manufacturing to providing high-value added services in addition to their traditional product development and manufacturing business. For this reason, it is of great importance to research PSS. The purpose of this paper is to establish a systematic strategy and a system tool for PSS design.

A requirement-driven product-service system (RdPPS) is developed using requirements analysis and knowledge management technologies. A framework is proposed to support RdPPS by providing tools and methods for requirement analysis and processing, formalization of PSS by ontology-based knowledge representation, reasoning method for PSS solution finding, and solution optimizing and assessing. Finally, the design support strategies for RdPPS are investigated to demonstrate the usability and functioning of the developed system.

Many conventional design methods did not consider the influence of customer requirements (CRs) during the planning phase of PSS design. Moreover, a broader range of knowledge is required to PSS design, since both products and services are considered.

This research provides a solid foundation for PSS, and promotes an effective means for PSS design.

A RdPSS is presented. CRs are considered during the design phase of PSS as well as both product and service knowledge.

Configuration systems are used as a means for efficient design of customer tailored product service systems (PSS). In PSS configuration, mapping customer needs with optimal configuration of PSS components have become much more challenging, because more knowledge with personalization aspects has to be considered. However, the extant techniques are hard to be applied to acquire personalized configuration rules. The purpose of this paper is to extract the configuration rule knowledge in symbolism formulation from historical data.

Customer characteristics (CCs) are defined and introduced into the construction of configuration rules. Personalized PSS configuration rules (PCRs) are thereby proposed to collect and represent more knowledge. An approach combining Local Cluster Neural Network and Rulex algorithm is proposed to extract rule knowledge from historical data.

The personalized configuration rules with CCs are able to alleviate the burden of customers in expressing functional requirements. Furthermore, in the long-term relationship with a customer in PSS realization, PSS offerings can be reconfigured according to the changing CCs with the guide of PCRs.

The contribution of this paper lies in introducing the attribute of CCs into the antecedents of PCRs and proposing the neural networks-based approach to extracting the rule knowledge from historical data.

Nowadays manufacturers companies are increasingly compelled to navigate towards servitization. Different methods and approaches were proposed in literature to support them to switch from traditional product-based business model to product service systems (PSSs). However, new knowledge, capabilities and skills were needed to consistently develop PSSs, since they need a joint focus on both customer’s perspective and company’s internal performance and at the same time a proper support for the integration of product and service design. The purpose of this paper is to propose the Product Service System Lean Design Methodology (PSSLDM), a structured methodology to develop PSSs along their entire lifecycle.

Retrieving concepts from interpretative, interactive and system development research traditions, and strongly reminding the design research methodology framework, the adopted research methodology is composed of three main phases (observation and conceptualization, theory building and tool development, validation) and involved three heterogeneous companies.

This paper provides an overview of the PSSLDM, explaining how the different methods supporting its conduction should contribute to properly design an integrated PSS. Moreover, companies highlighted several benefits in the different stages along the PSS lifecycle deriving by the adoption of the PSSLDM.

The development of a platform based on the PSSLDM methodology raises a discussion on the possible changes needed by current Product Lifecycle Management (PLM) models and systems when they have to do with PSSs.

The PSSLDM enriches the already proposed SErvice Engineering Methodology, introducing new several components linked by lean rules in each of its phases (starting from customer analysis, going through solution concept and detailed design, until the offering analysis) and better supprting the deatil design of both prodcut and service components.

Knowledge reuse using electronic repositories, while increasingly important, requires more thorough analysis. Service modularity has been recently applied in services research but has not been integrated into knowledge reuse studies. The purpose of this paper is to draw on both service modularity and knowledge reuse to develop and validate a framework that categorises forms of packaged knowledge in an electronic repository.

Drawing on knowledge reuse and service modularity research, a model is proposed. The model is empirically tested using a case study research design.

This research highlighted the value of including both context and process as key dimensions when packaging service knowledge for reuse. This study identifies knowledge types present in modular solutions and how they were configured and reconfigured in the knowledge repository. This research identified five ways modularised services were leveraged. In addition to the traditional scale and stretch approaches, already present, but conflated, in the service literature, three other configurations were identified; shrink, separate and segment.

The findings are based on a single empirical case study which may limit the generalisability of the findings. There is a need for additional research to further validate the model in additional contexts.

This study provides managers with empirical examples of how a modular repository was used in practice and outlines five ways of recombining contextual and processual elements to enable service codification and reuse. It has implications for how knowledge is decomposed and recombined in repositories, suggesting an explicit separation of context and process knowledge while developing modular elements within both.

To the best of the author’s knowledge, this is the first study that explicitly uses context and process as dimensions and draws on service modularity to understand types of knowledge reuse in electronic repositories. In doing so, it adds value by developing and validating a model that identifies five types of reuse.

The tightening of environmental measures and policies in various countries around the world is forcing manufacturing companies, particularly those that make up the automotive industry, to improve their production processes, through the implementation of approaches such as lean production (LP) and Industry 4.0 (I4.0) technologies, to reduce industrial waste. However, the literature indicates that the implementation of LP and I4.0 does not always lead to an improvement in the level of operational performance (OP). Therefore, this study analyzes the effects of the implementation of LP practices and I4.0 on a green supply chain (GSC) and the operational performance of manufacturing companies in the Mexican automotive industry.

A theoretical research framework consisting of six hypotheses was developed and validated by applying partial least squares structural equation modeling (PLS-SEM) and using a sample of 460 companies from the Mexican automotive industry.

The results show that the level of OP of manufacturing companies increases substantially with the implementation of LP and I4.0 practices, as well as a GSC.

Managers of manufacturing companies will be able to use the results of this study to improve their production systems and to demonstrate the effects of these practices on OP.

This study contributes to the literature on LP and I4.0 by providing robust empirical evidence of the positive effects of implementing these approaches on the GSC and OP of manufacturing companies.

In the present scenario, the demand for additive manufacturing (AM) has increased. Taking into account environmental problems and sustainability, manufacturers are now also considering the environmental and sustainability criteria in their decision-making process. The sustainability concept is known as the triple-bottom line, namely, economic, social and environmental perspectives. Sustainable concept selection in the manufacturing organisation can be considered as the selection of sustainable material, product design, process, method and technology. This study aims to select an appropriate AM process by considering sustainability from various available techniques.

Appropriate sustainable performance indicators for the AM were identified based on literature as well as in discussion with experts and decision-makers. The model addresses all the major dimensions of sustainable concepts of AM such as material/product quality, machine performance, market stability, total cost and ecological values. A hybrid multi-criteria decision-making approach, i.e. stepwise weight assessment ratio analysis and complex proportional assessment methods, have been used to select the best AM technique. While selecting criteria affecting AM machines and processes, criteria based on the sustainable concept are considered.

Among the four selected AM processes, i.e. fused diffusion modelling (FDM), laminated object manufacturing (LOM), stereolithography apparatus (SLA) and selective laser sintering (SLS), the best alternative was found to be FDM.

The present study highlights some limitations in the selection of AM process and methodology used in this research. This study considers only four AM processes, i.e. FDM, LOM, SLA and SLS. Future work may include considering other AM processes and criteria that affect the sustainability of AM.

The present work will help researchers and production managers to decide the best AM alternatives to fabricate desired parts. Hence, AM can help in maximum energy utilisation, optimal consumption of resources, minimum material wastage and reduction of CO₂ emission.

The study considers some important criteria, including energy consumption, eco-friendly and wastage-free production, that help sustainable AM. This study can result in a good economic efficiency of AM industries and, therefore, positively impact customers using green products.

The purpose of this paper is to propose a conceptual framework for product service system (PSS) design for machine tools and discuss the PSS implementation issues focusing on the Indian machine tool business sector.

The paper opted for an exploratory survey conducted in the Indian machine tool sector including 39 in-depth interviews with employees of different organizations representing middle and senior management having decision-making authority. It also involves proposing a framework to address the stakeholder’s requirements for services that offers foundation for PSS designers.

The paper helps get an insights about key issues for PSS implementation by the Indian machine tool sector. The hybrid PSS model proposed in the paper can address the stakeholder’s requirements for flexibility in business models through different business phases.

The paper offers suggestions for the development of PSS for machine tools for designers and identify issues to be considered particularly in Indian machine tools business context.

This paper provides an insight to judge the feasibility of PSS concept for machine tools in Indian context and offers framework for PSS designers.