Search results

This study aims to investigate the behavior of different types of stone columns, including the short and floating columns, as well as the ordinary and the geosynthetic encased stone columns (OSC and GESC). The effectiveness of the geosynthetic encasement and the impact of the installation using the lateral expansion method on the column performance is evaluated through a three-dimensional (3D) unit cell numerical analysis.

A full 3D numerical analysis is carried out using the explicit finite element code PLAXIS 3D to examine the installation influence on settlement reduction (ß), lateral displacement (U_x) and vertical displacement (U_z) relative to different values of lateral expansion of the column (0% to 15%).

The findings demonstrate the superior performance of GESC, particularly short columns outperforming floating counterparts. This enhanced performance is attributed to the combined effects of geosynthetic encasement and increased lateral expansion. Notably, these strategies contribute significantly to decreasing lateral displacement (U_x) at the column’s edge and reducing vertical displacement (U_z) under the rigid footing.

In contrast to previous studies that examined the installation effect of OSC contexts, this paper presents a comprehensive investigation into the effect of geosynthetic encasement and the installation effects using the lateral expansion method in very soft soil, using 3D numerical simulation. The study emphasizes the significance of the consideration of geosynthetic encasement and lateral expansion of the column during the design process to enhance column performance.

Intumescent coatings are nowadays a dominant passive system used to protect structural materials in case of fire. Due to their reactive swelling behaviour, intumescent coatings are particularly complex materials to be modelled and predicted, which can be extremely useful especially for performance-based fire safety designs. In addition, many parameters influence their performance, and this challenges the definition and quantification of their material properties. Several approaches and models of various complexities are proposed in the literature, and they are reviewed and analysed in a critical literature review.

Analytical, finite-difference and finite-element methods for modelling intumescent coatings are compared, followed by the definition and quantification of the main physical, thermal, and optical properties of intumescent coatings: swelled thickness, thermal conductivity and resistance, density, specific heat capacity, and emissivity/absorptivity.

The study highlights the scarce consideration of key influencing factors on the material properties, and the tendency to simplify the problem into effective thermo-physical properties, such as effective thermal conductivity. As a conclusion, the literature review underlines the lack of homogenisation of modelling approaches and material properties, as well as the need for a universal modelling method that can generally simulate the performance of intumescent coatings, combine the large amount of published experimental data, and reliably produce fire-safe performance-based designs.

Due to their limited applicability, high complexity and little comparability, the presented literature review does not focus on analysing and comparing different multi-component models, constituted of many model-specific input parameters. On the contrary, the presented literature review compares various approaches, models and thermo-physical properties which primarily focusses on solving the heat transfer problem through swelling intumescent systems.

The presented literature review analyses and discusses the various modelling approaches to describe and predict the behaviour of swelling intumescent coatings as fire protection for structural materials. Due to the vast variety of available commercial products and potential testing conditions, these data are rarely compared and combined to achieve an overall understanding on the response of intumescent coatings as fire protection measure. The study highlights the lack of information and homogenisation of various modelling approaches, and it underlines the research needs about several aspects related to the intumescent coating behaviour modelling, also providing some useful suggestions for future studies.

The purpose of this study is analysis of deformation and vibrations of turbine blades produced by high electrolyte pressure during electrochemical machining.

An experimental setup was designed, experiments were conducted and the obtained results were compared with the finite element results. The deformations were measured according to various flow rates of electrolyte. In finite element calculations, the pressure distribution created by the electrolyte on the blade surface was obtained in the ANSYS® (A finite element analysis software) Fluent software and transferred to the static structural where the deformation analysis was carried out. Three different parameters were examined, namely blade thickness, blade material and electrolyte pressure on blade disk caused by mass flow rate. The deformation results were compared with the gap distances between cathode and anode.

Large deformations were obtained at the free end of the blade and the most curved part of it. The appropriate pressure values for the electrolyte to be used in the production of blisk blades were proposed numerically. It has been determined that high pressure applications are not suitable for gap distance lower than 0.5 mm.

When the literature is examined, it is required that the high speed flow of the electrolyte is desired in order to remove the parts that are separated from the anode from the machining area during electrochemical machining. However, the electrolyte flowing at high speeds causes high pressure in the blisk blades, excessive deformation and vibration of the machined part, and as a result, contact of the anode with the cathode. This study provides important findings for smooth electro chemical machining at high electrolyte flows.

This paper aims to establish a lattice Boltzmann (LB) method for solid-liquid phase transition (SLPT) from the pore scale to the representative elementary volume (REV) scale. By applying this method, detailed information about heat transfer and phase change processes within the pores can be obtained, while also enabling the calculation of larger-scale SLPT problems, such as shell-and-tube phase change heat storage systems.

Three-dimensional (3D) pore-scale enthalpy-based LB model is developed. The computational input parameters at the REV scale are derived from calculations at the pore scale, ensuring consistency between the two scales. The approaches to reconstruct the 3D porous structure and determine the REV of metal foam were discussed. The implementation of conjugate heat transfer between the solid matrix and the solid−liquid phase change material (SLPCM) for the proposed model is developed. A simple REV-scale LB model under the local thermal nonequilibrium condition is presented. The method of bridging the gap between the pore-scale and REV-scale enthalpy-based LB models by the REV is given.

This coupled method facilitates detailed simulations of flow, heat transfer and phase change within pores. The approach holds promise for multiscale calculations in latent heat storage devices with porous structures. The SLPT of the heat sinks for electronic device thermal control was simulated as a case, demonstrating the efficiency of the present models in designing and optimizing SLPT devices.

A coupled pore-scale and REV-scale LB method as a numerical tool for investigating phase change in porous materials was developed. This innovative approach allows for the capture of details within pores while addressing computations over a large domain. The LB method for simulating SLPT from the pore scale to the REV scale was given. The proposed method addresses the conjugate heat transfer between the SLPCM and the solid matrix in the enthalpy-based LB model.

Soft robots are known for their excellent safe interaction ability and promising in surgical applications for their lower risks of damaging the surrounding organs when operating than their rigid counterparts. To explore the potential of soft robots in cardiac surgery, this paper aims to propose an adaptive iterative learning controller for tracking the irregular motion of the beating heart.

In continuous beating heart surgery, providing a relatively stable operating environment for the operator is crucial. It is highly necessary to use position-tracking technology to keep the target and the surgical manipulator as static as possible. To address the position tracking and control challenges associated with dynamic targets, with a focus on tracking the motion of the heart, control design work has been carried out. Considering the lag error introduced by the material properties of the soft surgical robotic arm and system delays, a controller design incorporating iterative learning control with parameter estimation was used for position control. The stability of the controller was analyzed and proven through the construction of a Lyapunov function, taking into account the unique characteristics of the soft robotic system.

The tracking performance of both the proportional-derivative (PD) position controller and the adaptive iterative learning controller are conducted on the simulated heart platform. The results of these two methods are compared and analyzed. The designed adaptive iterative learning control algorithm for position control at the end effector of the soft robotic system has demonstrated improved control precision and stability compared with traditional PD controllers. It exhibits effective compensation for periodic lag caused by system delays and material characteristics.

Tracking the beating heart, which undergoes quasi-periodic and complex motion with varying accelerations, poses a significant challenge even for rigid mechanical arms that can be precisely controlled and makes tracking targets located at the surface of the heart with the soft robot fraught with considerable difficulties. This paper originally proposes an adaptive interactive learning control algorithm to cope with the dynamic object tracking problem. The algorithm has theoretically proved its convergence and experimentally validated its performance at the cable-driven soft robot test bed.

The purpose of this study is to investigate if a firm's exchange complexity profile (that is, the linkages between the firm and its environment) influences investor behavior at the negotiation table where a firm valuation is derived.

The authors utilize Qualitative Comparative Analysis (QCA). Specifically, the authors utilize fuzzy-set Qualitative Comparative Analysis (fsQCA), a QCA variant that allows the researcher to assign graduated membership in sets.

When the authors dichotomize their positions as either higher stakes that favor the seller (high capital, low equity, high valuation) or lower stakes that favor the buyer (low capital, high equity, low valuation), and when the authors focus primarily on the equity outcome, the authors find that investors adopt a reductionist stance that adheres to a transaction cost economics logic under conditions of lower stakes and higher complexity as well as higher stakes and lower complexity conditions. The authors interpret this to mean that equity serves as a counter-balancing lever for a firm's exchange complexity configuration.

On a theoretical level, the authors showcase the exchange complexity framework and differentiate its position within the extant frameworks that address a firm's competitive advantage. More generally, the authors note that this framework brings the discipline of micro-economics and the field of strategic management closer together, providing scholars with a new tool enabling research across industries for the portfolio level of analysis.

Under the background of coexistence of information overload and information fragmentation, it is of great significance to identify influencing factors and reveal the evolution logic of public opinion for public opinion governance.

Taking 24 hot social events as research cases, firstly, the evolution process of public opinion was divided into initial stage and response stage. Secondly, eight antecedent variables were extracted for qualitative comparative analysis of fuzzy sets. Finally, the configuration path of public opinion evolution results was summarized.

The research showed that compared with the initial stage, the influencing factors in the reaction stage played a key role in the continuous evolution of public opinion. The influencing factors in the initial stage and response stage played an indispensable role in promoting the evolution of public opinion to calm down.

This research can provide reference for regulators to timely grasp the initiative, discourse power and leadership of public opinion development.

Research on the two-stage configuration path of public opinion evolution is helpful to clarify the key factors affecting the evolution trend of online public opinion of hot events.

Blockchain’s potential is so significant that business activities across all industries can be drastically altered. Furthermore, the characteristics of blockchain appear to be well-suited to accounting requirements. However, accounting professionals’ attitude and intention toward blockchain adoption are not clear, particularly in India. Thus, this study aims to investigate and evaluate accountants’ intention to adopt blockchain technology in accounting activities.

This study examined and assessed accountants’ intention to use blockchain in accounting. To effectively measure usage intention, this study extended the unified theory of acceptance and use of technology (UTAUT) model by including context-specific constructs. To empirically test and validate the proposed model, data were collected from “369” professional accountants in India.

The findings revealed that facilitating conditions, performance expectancy and initial trust had a significant impact on adoption. Furthermore, the regulatory framework materially moderated the association between usage intention and its predictors.

These findings provide new empirical evidence about the impact of different predictors of usage intention by extending the UTAUT model. Relevant stakeholders can refer to this pioneering study to increase the adoption of blockchain as an efficient and trustworthy system among professional accountants, particularly in developing countries such as India.

This study aims to address the critical need for innovative financing solutions in the global housing sector, focusing specifically on Malaysia’s distinct housing finance system encompassing both conventional and Islamic loans. The primary objective is to develop a transformative housing finance model that addresses affordability challenges and reshapes the Malaysian housing landscape.

The study presents an alternate housing finance model for Malaysia, integrating lower monthly payments and reduced household debt. Key variables include house price appreciation rates, interest rates, initial guarantee fees and loan-to-value ratios. Inspired by the Help to Buy (HTB) scheme, the model aligns with proven global initiatives for enhanced affordability, balancing payment amounts, loan interest rates and acceptable price thresholds.

The study’s findings promise to address affordability disparities and reshape Malaysia’s housing finance landscape. The emphasis is on introducing a structured repayment plan that offers a sustainable path to homeownership, particularly for low-income families. Incorporating the future value adaptation concept, inspired by reverse mortgages and Islamic finance, enhances adaptability, ensuring long-term sustainability despite economic shifts.

The proposed model promotes widespread access to homeownership, offering practical solutions for policymakers to improve affordability, prompting adaptable risk management strategies for financial institutions and empowering potential homebuyers with increased flexibility.

The study introduces a transformative housing finance model for Malaysia, merging elements from reverse mortgages, Islamic finance and the HTB scheme, offering potential applicability to similar systems globally.

For decades, conflict resolution (CR) educators working cross-culturally have struggled with a fundamental dilemma – whether to offer western, evidence-based approaches through a top-down (prescriptive) training process or to use a bottom-up (elicitive) strategy that builds on local cultural knowledge of effective in situ conflict management. This study aims to explore which conditions that prompted experienced CR instructors to use more prescriptive or elicitive approaches to such training in a foreign culture and the implications for training outcomes.

There are two parts to this study. First, the authors conducted a literature review to identify basic conditions that might be conducive to conducting prescriptive or elicitive cross-cultural CR training. The authors then tested the identified conditions in a survey with experienced CR instructors to identify different conditions that afforded prescriptive or elicitive approaches. Exploratory factor analysis and regression were used to assess which conditions determined whether a prescriptive or elicitive approach produced better outcomes.

In general, although prescriptive methods were found to be more efficient, elicitive methods produced more effective, culturally appropriate, sustainable and culturally sensitive training. Results revealed a variety of instructor, participant and contextual factors that influenced whether a prescriptive or elicitive approach was applied and found to be more suitable.

This study used empirical survey data with practicing experts to provide insight and guidance into when to use different approaches to CC-CR training effectively.