Search results

Purpose – This study aims at finding out the implementation of English for specific purposes (ESP) course and identifying the challenges faced by English lecturers in designing an ESP course for first-year students in the Engineering Faculty of Malikussaleh University.

Methodology – This study implements qualitative research through interviews as a means of data collection.

Findings – This study addresses the application of an ESP course and identifies the challenges appeared during the stages of designing. The study reveals that an ESP course is not completely implemented. In fact, the course provided little ESP contents. The paper also reveals that, in terms of challenges, each stage of design presents its own challenge. To design an ESP course involves five crucial stages, that is, needs analysis, syllabus, material, teaching, and evaluation. Teachers encounter challenges as the design process takes place.

Research Limitations/Implications – The present study provides an account of how English teachers view challenges in implementing a complete ESP course. However, further research should be conducted to discover the possibility of application of ESP course in national universities in Indonesia.

Practical Implications – This paper offers solutions in order to make the implementation of ESP course feasible in the university.

Originality/Value – There have not been any research in ESP application for engineering students in Malikussaleh University.

BIM education for construction professionals has tended to lag industry developments. This investigation initiates doctoral research into the use of BIM for construction education. The purpose of this study is to gain an understanding of existing examples of BIM education, their characteristics, the challenges faced in their implementation and any clear trends to focus the doctoral research effort.

A systematic search of peer-reviewed BIM education literature was carried out. From the articles captured, 51 specific cases of BIM education were identified and analysed.

Most cases are from the USA with a more global spread from 2013. A tendency towards interdisciplinary collaboration was apparent though single discipline courses remain important. BIM software in education is dominated by Autodesk products. Most cases were found to be BIM-focused with few examples of BIM-enabled education. This was consistent with the most significant BIM education challenges that were found to relate to the skill levels of students, time and the availability of technical support.

This is an initial study. It is based on only 51 cases of BIM education, which were partially described in peer reviewed conference and journal papers available in international databases.

The investigation has shed some light on existing examples of BIM education and these are useful in designing BIM education initiatives as well as directing further research efforts.

The study offers an original perspective on global BIM education. It also represents the commencement of doctoral research.

Building on work that explores the relationship between individual beliefs and ability to recognize discrimination (e.g., Kaiser and Major, 2006), we examine how an adherence to beliefs about gender essentialism, gender egalitarianism, and meritocracy shape one’s interpretation of an illegal act of sexual harassment involving a male supervisor and female subordinate. We also consider whether the role of the gendered culture of engineering (Faulkner, 2009) matters for this relationship. Specifically, we conducted an online survey-experiment asking individuals to report their beliefs about gender and meritocracy and subsequently to evaluate a fictitious but illegal act of sexual harassment in one of two university research settings: an engineering department, a male-dominated setting whose culture is documented as being unwelcoming to women (Hatmaker, 2013; Seron, Silbey, Cech, and Rubineau, 2018), and an ambiguous research setting. We find evidence that the stronger one’s adherence to gender egalitarian beliefs, the greater one’s ability to detect inappropriate behavior and sexual harassment while gender essentialist beliefs play no role in their detection. The stronger one’s adherence to merit beliefs, the less likely they are to view an illegal interaction as either inappropriate or as sexual harassment. We account for respondent knowledge of sexual harassment and their socio-demographic characteristics, finding that the former is more often associated with the detection of inappropriate behavior and sexual harassment at work. We close with a discussion of the transferability of results and policy implications of our findings.

The sustainable transition towards the circular economy requires the effective use of artificial intelligence (AI) and information technology (IT) techniques. As the sustainability targets for 2030–2050 increasingly become a tougher challenge, society, company managers and policymakers require more support from AI and IT in general. How can the AI-based and IT-based smart decision-support tools help implementation of circular economy principles from micro to macro scales?

This chapter provides a conceptual framework about the current status and future development of smart decision-support tools for facilitating the circular transition of smart industry, focussing on the implementation of the industrial symbiosis (IS) practice. IS, which is aimed at replacing production inputs of one company with wastes generated by a different company, is considered as a promising strategy towards closing the material, energy and waste loops. Based on the principles of a circular economy, the utility of such practices to close resource loops is analyzed from a functional and operational perspective. For each life cycle phase of IS businesses – e.g., opportunity identification for symbiotic business, assessment of the symbiotic business and sustainable operations of the business – the role played by decision-support tools is described and embedding smartness in these tools is discussed.

Based on the review of available tools and theoretical contributions in the field of IS, the characteristics, functionalities and utilities of smart decision-support tools are discussed within a circular economy transition framework. Tools based on recommender algorithms, machine learning techniques, multi-agent systems and life cycle analysis are critically assessed. Potential improvements are suggested for the resilience and sustainability of a smart circular transition.

The essay is addressed to practitioners in research management and from academic leadership. It describes which measures can contribute to creating an inclusive climate for research teams and preventing and effectively dealing with discrimination. The practical recommendations consider the policy and organizational levels, as well as the individual perspective of research managers. Following a series of basic recommendations, six lessons learned are formulated, derived from the contributions to the edited collection on “Diversity and Discrimination in Research Organizations.”

This article outlines the theoretical foundations of the research contributions of this edited collection about “Diversity and Discrimination in Research Organizations.” First, the sociological understanding of the basic concepts of diversity and discrimination is described and the current state of research is introduced. Second, national and organizational contextual conditions and risk factors that shape discrimination experiences and the management of diversity in research teams and organizations are presented. Third, the questions and research approaches of the individual contributions to this edited collection are presented.

Cross-docking is a supply chain distribution and logistics strategy for which less-than-truckload shipments are consolidated into full-truckload shipments. Goods are stored up to a maximum of 24 hours in a cross-docking terminal. In this chapter, we build on the literature review by Ladier and Alpan (2016), who reviewed cross-docking research and conducted interviews with cross-docking managers to find research gaps and provide recommendations for future research. We conduct a systematic literature review, following the framework by Ladier and Alpan (2016), on cross-docking literature from 2015 up to 2020. We focus on papers that consider the intersection of research and industry, e.g., case studies or studies presenting real-world data. We investigate whether the research has changed according to the recommendations of Ladier and Alpan (2016). Additionally, we examine the adoption of Industry 4.0 practices in cross-docking research, e.g., related to features of the physical internet, the Internet of Things and cyber-physical systems in cross-docking methodologies or case studies. We conclude that only small adaptations have been done based on the recommendations of Ladier and Alpan (2016), but we see growing attention for Industry 4.0 concepts in cross-docking, especially for physical internet hubs.

This chapter aims to present the context, the approach and the pedagogical tools deployed at École Centrale Marseille (ECM) to promote gender equality in engineering education. The ECM has put several mechanisms in place such as challenging traditional gender stereotypes, social representation of the engineering profession and facing the realities of a professional world that is overwhelmingly masculine, including awareness of the glass ceiling effect on access to positions of responsibility and prevention of sexual harassment. The ECM model combines multidisciplinary studies with a professional grounding with the aim of educating students to be able to transform society. In 1997, the ECM founded the Mediterranean Network of Engineering Schools with the main goal of fostering sustainable development in the Mediterranean basin. The ECM has been part of the community of practice on gender equality initiated by Mediterranean Network of Engineering Schools through its participation in the H2020 TARGET project on gender equality in research and higher education.

Purpose – The purpose of this paper is to develop prototype of the information system of the flood monitoring based internet of things (IoT). This prototype serves to assist users in accessing flood levels through water levels and rainy weather conditions.

Design/Methodology/Approach – This paper presents the design of information system of flood monitoring based internet of things (IoT). This prototype study acquires water level and rainfall data using ultrasonic sensors HC-SR04 and rain sensor. Data of flood height and rain levels detected by sensors are processed using Arduino Uno Microcontroller to produce output data in HTML format. Flood altitude information system and rainy weather from the microcontroller are distributed using ethernet module as web server integrated with Wireless N Router TL-MR3020 as a gateway path to the user.

Findings – This research produces a prototype of web-based flood monitoring information system that has been able to distribute data of flood height and rainy weather in real time.

Research Limitations/Implications – In the implementation of measurement, the information system only accesses one flood detector or one flooded location.

Practical Implications – This research produces a prototype of web-based flood monitoring information system that has been able to distribute data of flood height and rainy weather in real time.

Originality/Value – System prototype is the first development that uses internet of things (IoTs) method in real time web-based flood measurement with information in the form of flood hazard information in the form of water level and rainy weather conditions.

Industry 4.0 or the Fourth Industrial Revolution is characterized by robotic process automation and machine-to-machine communications. Since computers, machines, and robots share information and knowledge more swiftly and effectively than humans, the question is what human beings' role could be in the era of the Internet-of-Thing. The answer would be beneficial to institutions for higher education to anticipate. The literature reveals a gap between the intended learning outcomes in higher education institutions and the needs of employers in Industry 4.0. Evidence is shown that higher education mainly focused on knowledge (know-what) and theory-based (know-why) intended learning outcomes. However, competent professionals require knowledge (know-what), understanding of the theory (know-why), professional (know-how) and interpersonal skills (know-how and know-who), and need intrapersonal traits such as creativeness, persistence, a result-driven attitude et cetera. Therefore, intended learning outcomes in higher education should also develop interpersonal skills and intrapersonal characteristics. Yet, personality development is a personal effort vital for contemporary challenges. The history of the preceding industrial revolutions showed the drawbacks of personality and character education; politicians have abused it to control societies in the 19th and 20th centuries. In the discussion section, the institutions for higher education are alerted that the societal challenges of the twenty-first century could lead to a form of personality education that is not in the student's interest and would violate Isaiah Berlin's philosophical concept of ‘positive freedom’.