Search results

This paper aims to overcome the inability of both comparing loss costs and accounting for production resource losses of Overall Equipment Effectiveness (OEE)-related approaches.

The authors conducted a literature review about the studies focusing on approaches combining OEE with monetary units and/or resource issues. The authors developed an approach based on Overall Equipment Cost Loss (OECL), introducing a component for the production resource consumption of a machine. A real case study about a smart multicenter three-spindle machine is used to test the applicability of the approach.

The paper proposes Resource Overall Equipment Cost Loss (ROECL), i.e. a new KPI expressed in monetary units that represents the total cost of losses (including production resource ones) caused by inefficiencies and deviations of the machine or equipment from its optimal operating status occurring over a specific time period. ROECL enables to quantify the variation of the product cost occurring when a machine or equipment changes its health status and to determine the actual product cost for a given production order. In the analysed case study, the most critical production orders showed an actual production cost about 60% higher than the minimal cost possible under the most efficient operating conditions.

The proposed approach may support both production and cost accounting managers during the identification of areas requiring attention and representing opportunities for improvement in terms of availability, performance, quality, and resource losses.

Increasing incidents of privacy invasion on social networking sites (SNS) are intensifying the concerns among stakeholders about the misuse of personal data. However, there seems to be limited research on exploring the impact of specific privacy concerns on users’ intention to engage in various privacy protection behaviors. This study aims to examine the role of social privacy concerns, institutional privacy concerns and privacy self-efficacy as antecedents of privacy protection–related control activities intention among young adults active on SNS.

Data collected from 284 young adults active on SNS was analyzed through partial least squares structural equation modeling using Smart PLS.

The results indicate that institutional privacy concerns, social privacy concerns and privacy self-efficacy positively influence the control activities intention of SNS users. The extent of privacy self-efficacy and privacy protection-related control activities intention differs among users based on gender.

This study is limited to a population of young adults in the age group of 18–25 years.

The findings of this study form the basis for specific recommendations addressing the different types of privacy concerns experienced by social media users, promoting responsible privacy control behaviors on online platforms and discouraging the possible misuse of information by third parties.

This study validates a theoretical framework that can contribute to future investigations concerning the use of SNS. The study findings form the basis for a set of practical recommendations for policymakers, SNS platforms and users.

Prior research has extensively examined how bringing technology from work into the non-work life domain creates conflict, yet the reverse pathway has rarely been studied. The purpose of this study is to bridge this gap and examine how the non-work use of smartphones in the workplace affects work–life conflict.

Drawing from three literature streams: technostress, work–life conflict and role boundary theory, the authors theorise on how limiting employees' ability to integrate the personal life domain into work, by means of technology use policy, contributes to stress and work–life conflict. To test this model, the authors employ a natural experiment in a company that changed its policy from fully restricting to open smartphone access for non-work purposes in the workplace. The insights gained from the experiment were explored further through qualitative interviews.

Work–life conflict declines when a ban on using smartphones for non-work purposes in the workplace is revoked. This study's results show that the relationship between smartphone use in the workplace and work–life conflict is mediated by sensed stress. Additionally, a post-hoc analysis reveals that work performance was unchanged when the smartphone ban was revoked.

First, this study advances the authors' understanding of how smartphone use policies in the workplace spill over to affect non-work life. Second, this work contributes to the technostress literature by revealing how, in specific situations, engagement with ICT can reduce distress and strain.

This study aims to improve a construction company's overall project delivery by utilising lean six sigma (LSS) methods combined with building information modelling (BIM) to design, modularise and manufacture various building elements in a controlled factory environment off-site.

A case study in a construction company utilised lean six sigma (LSS) methodology and BIM to identify non-value add waste in the construction process and improve sustainability.

An Irish-based construction company manufacturing modular pipe racks for the pharmaceutical industry utilised LSS to optimise and standardise their off-site manufacturing (OSM) partners process and leverage BIM to design skids which could be manufactured offsite and transported easily with minimal on-site installation and rework required. Productivity was improved, waste was reduced, less energy was consumed, defects were reduced and the project schedule for completion was reduced.

The case study was carried out on one construction company and one construction product type. Further case studies would ensure more generalisability. However, the implementation was tested on a modular construction company, and the methods used indicate that the generic framework could be applied and customized to any offsite company.

This is one of the few studies on implementing offsite manufacturing (OSM) utilising LSS and BIM in an Irish construction company. The detailed quantitative benefits and cost savings calculations presented as well as the use of the LSM methods and BIM in designing an OSM process can be leveraged by other construction organisations to understand the benefits of OSM. This study can help demonstrate how LSS and BIM can aid the construction industry to be more environmentally friendly.

Although businesses continue to take up artificial intelligence (AI), concerns remain that companies are not realising the full value of their investments. The study aims to provide insights into how AI creates business value by investigating the mediating role of Business Process Management (BPM) capabilities.

The integrative model of IT Business Value was contextualised, and structural equation modelling was applied to validate the proposed serial multiple mediation model using a sample of 448 organisations based in the EU.

The results validate the proposed serial multiple mediation model according to which AI adoption increases organisational performance through decision-making and business process performance. Process automation, organisational learning and process innovation are significant complementary partial mediators, thereby shedding light on how AI creates business value.

In pursuing a complex nomological framework, multiple perspectives on realising business value from AI investments were incorporated. Several moderators presenting complementary organisational resources (e.g. culture, digital maturity, BPM maturity) could be included to identify behaviour in more complex relationships. The ethical and moral issues surrounding AI and its use could also be examined.

The provided insights can help guide organisations towards the most promising AI activities of process automation with AI-enabled decision-making, organisational learning and process innovation to yield business value.

While previous research assumed a moderated relationship, this study extends the growing literature on AI business value by empirically investigating a comprehensive nomological network that links AI adoption to organisational performance in a BPM setting.

Strategic flexibility (SF) has become increasingly important for firms because of the fast changes in the external environment. In line with the practical importance of SF, an emerging research field has developed around it that has attempted to understand the nature of SF and the key relationships. The aim of this study is to unveil the semantic structure of the recent literature on SF and to suggest new promising areas for future research.

The authors conduct a systematic literature review with a bibliographic analysis technique, which allows authors to identify the main recent streams in the literature, as well as offer reflections and suggestions for future research.

The authors uncover three main emerging areas in the research on SF, namely SF as a dynamic capability, the role of knowledge management for SF and the relationship between a firm SF and the external environment. The authors put forward three avenues for future research on SF: Avenue 1. SF, business model innovation (BMI) and other dynamic capabilities (DC), Avenue 2. Digital technologies and SF/organizational agility and Avenue 3. SF and sustainability. Articles included in the special issue entitled “A strategic perspective on flexibility, agility and adaptability in the digital era” contribute to Avenue 2, thus paving the way for filling some of the identified gaps regarding the relationship between SF and digitalization.

To the best of authors’ knowledge, this is the first literature review on SF that uses a bibliometric approach to draw conclusions on the findings in the literature. The review contributes to the theoretical understanding of SF by illustrating and explicating core topics that have persisted over time, as well as by presenting three main avenues for further developing authors’ knowledge around SF.

This study aims to investigate how configurations of boundary objects (BOs) support innovation teams in developing innovative product concepts. Specifically, it explores the effectiveness of different artefact configurations in facilitating collaboration and bridging knowledge boundaries during the concept development process.

The research is based on data from ten undergraduate innovation teams working with an industry partner in a creative industry. Six categories of BOs are identified, which serve as tools for collaboration. The study applies fsQCA (fuzzy-set qualitative comparative analysis) to analyse the configurations employed by the teams to bridge knowledge boundaries and support the development of innovative product concepts.

The findings of the study reveal two distinct groups of configurations: product envisioning and product design. The configurations within the “product envisioning” group support the activities of visioning and pivoting, enabling teams to innovate the product concept by altering the product vision. On the other hand, the configurations within the “product design” group facilitate experimenting, modelling and prototyping, allowing teams to design the attributes of the innovative product concept while maintaining the product vision.

This research contributes to the field of innovation by providing insights into the role of BOs and their configurations in supporting innovation teams during concept development. The results suggest that configurations of “product envisioning” support bridging semantic knowledge boundaries, while configurations within “product design” bridge pragmatic knowledge boundaries. This understanding contributes to the broader field of knowledge integration and innovation in design contexts.

The construction industry has considerably evolved in the recent two decades due to the emergence of sustainability, lean construction (LC) and building information modelling (BIM). Despite previous research efforts, there is still a gap concerning the multidimensional nature of their integration. Hence, this study aims to fill the mentioned knowledge gap through exploring and comparing the challenges, enablers, techniques as well as benefits of integrating LC with BIM and sustainability in building construction projects.

A systematic literature review was conducted to fulfill the purpose of this study.

The findings reveal and compare the challenges, enablers, techniques and benefits of integrating LC with BIM and sustainability in building construction projects. The results suggest that there are eight common challenges for integrating LC with BIM and sustainability, including high initial cost, lack of collaboration, lack of professionals and lack of compatible contractual framework. The discovered challenges, enablers, techniques and benefits seem to be mostly routed in people. The findings also suggest that the synergistic benefits of integrating LC with BIM and sustainability can overcome the common challenges (safety, reliability, productivity, collaboration and quality) in construction projects.

The findings contribute to the literature and practice concerning the integration of LC with BIM and sustainability by exploring, comparing and discussing the relevant challenges, enablers, techniques as well as benefits. Moreover, the findings reveal the significance of the development of people in construction industry, besides processes and technology, as people are always subject of activities in construction while processes and technology are always objects.

Output from the Irish Dairy Industry has grown rapidly since the abolition of quotas in 2015, with processors investing heavily in capacity expansion to deal with the extra milk volumes. Further capacity gains may be achieved by extending the processing season into the winter, a key enabler for which being the reduction of duration of the winter maintenance overhaul period. This paper aims to investigate if Lean Six Sigma tools and techniques can be used to enhance operational maintenance performance, thereby releasing additional processing capacity.

Combining the Six-Sigma Define, Measure, Analyse, Improve, Control (DMAIC) methodology and the structured approach of Turnaround Maintenance (TAM) widely used in process industries creates a novel hybrid model that promises substantial improvement in maintenance overhaul execution. This paper presents a case study applying the DMAIC/TAM model to Ireland’s largest dairy processing site to optimise the annual maintenance shutdown. The objective was to deliver a 30% reduction in the duration of the overhaul, enabling an extension of the processing season.

Application of the DMAIC/TAM hybrid resulted in process enhancements, employee engagement and a clear roadmap for the operations team. Project goals were delivered, and original objectives exceeded, resulting in €8.9m additional value to the business and a reduction of 36% in the duration of the overhaul.

The results demonstrate that the model provides a structure that promotes systematic working and a continuous improvement focus that can have substantial benefits for wider industry. Opportunities for further model refinement were identified and will enhance performance in subsequent overhauls.

To the best of the authors’ knowledge, this is the first time that the structure and tools of DMAIC and TAM have been combined into a hybrid methodology and applied in an Irish industrial setting.

This study aims to present a state-of-the-art review of building information modelling (BIM) in the Swedish construction practice with a focus on wood construction. It focuses on examining the extent, maturity and actual practices of BIM in the Swedish wood construction industry, by analysing practitioners’ perspectives on the current state of BIM and its perceived benefits.

A qualitative approach was selected, given the study’s exploratory character. Initially, an extensive review was undertaken to examine the current state of BIM utilisation and its associated advantages within the construction industry. Subsequently, empirical data were acquired through semi-structured interviews featuring open-ended questions, aimed at comprehensively assessing the prevailing extent of BIM integration within the Swedish wood construction sector.

The research concluded that the wood construction industry in Sweden is shifting towards BIM on different levels, where in some cases, the level of implementation is still modest. It should be emphasised that the wood construction industry in Sweden is not realising the full potential of BIM. The industry is still using a combination of BIM and traditional methods, thus, limiting the benefits that full BIM implementation could offer the industry.

This study provided empirical evidence on the current perceptions and state of practice of the Swedish wood construction industry regarding BIM maturity.