Search results

This study aims to develop an experimentally validated three-dimensional numerical model for predicting different flow patterns produced with a gas dynamic virtual nozzle (GDVN).

The physical model is posed in the mixture formulation and copes with the unsteady, incompressible, isothermal, Newtonian, low turbulent two-phase flow. The computational fluid dynamics numerical solution is based on the half-space finite volume discretisation. The geo-reconstruct volume-of-fluid scheme tracks the interphase boundary between the gas and the liquid. To ensure numerical stability in the transition regime and adequately account for turbulent behaviour, the k-ω shear stress transport turbulence model is used. The model is validated by comparison with the experimental measurements on a vertical, downward-positioned GDVN configuration. Three different combinations of air and water volumetric flow rates have been solved numerically in the range of Reynolds numbers for airflow 1,009–2,596 and water 61–133, respectively, at Weber numbers 1.2–6.2.

The half-space symmetry allows the numerical reconstruction of the dripping, jetting and indication of the whipping mode. The kinetic energy transfer from the gas to the liquid is analysed, and locations with locally increased gas kinetic energy are observed. The calculated jet shapes reasonably well match the experimentally obtained high-speed camera videos.

The model is used for the virtual studies of new GDVN nozzle designs and optimisation of their operation.

To the best of the authors’ knowledge, the developed model numerically reconstructs all three GDVN flow regimes for the first time.

This study aims at building a framework for the electronic word-of-mouth (eWOM) response under the social media environment. The elaboration likelihood model was adopted to explain how message source credibility and message appeal jointly influence the eWOM response process, while source credibility provides a central route and message appeal plays a peripheral route for information processing.

This study used a scenario design to test the decision behavior in the Facebook environment through message content manipulation. A convenience sampling method was adopted in this study. We collected 203 valid questionnaires and tested this research model with LISREL 8.8. This study used a two-stage structural equation modeling data analysis method with LISREL 8.8, by which the measurement model was assessed through confirmatory factor analysis for the reliability and validity of the research model, and the causal relationship among factors was assessed through exploratory factor analysis .

The results showed that 53% variance of eWOM responses could be explained by message source credibility and emotional message appeal from the elaboration likelihood model perspective. Message source credibility plays a central role in the social media environment. The model was further tested with a demographic profile analysis for both gender and age. It is found that a female user is influenced by both source credibility and emotional appeal, but a male user is only influenced by message source credibility. The mature age group is more responsive to eWOM messages.

The sample might not represent all social networking sites (SNS) users. The participants represent a small segment of the Facebook population around the globe. Secondly, this research design could be improved by using more recreational messages to test the effects of message appeal and message source credibility. Thirdly, the mobile phone is a type of physical product rather than an experiential product. Future studies could try to identify the same eWOM determinants with different SNS functions, for example, the inbox message function. Similarly, Facebook users are allowed to use both text and pictures to disseminate promotional messages.

This study provides an insight for SNS administrators regarding the determinants of driving more customer responses toward a message. Message source credibility and message appeal are identified as the antecedents for eWOM responses in SNS. Companies could make use of this finding to improve their marketing communication strategy in SNS. The finding can inform administrators of the importance of focusing on both customers’ psychological state and message attributes during the dissemination of promotional messages to improve the efficiency of the promotional effort. Companies aimed at receiving different types of eWOM responses in SNS may need to consider other factors for creating their promotional messages.

Previous studies have mainly identified factors influencing eWOM responses from the people-centered variables such as personal traits and social relationships. This study proposes that the eWOM response is a dual information processing process that can be explained by the ELM. When a user processes information in SNS, he follows both the central route and the peripheral route (i.e. source credibility and message appeal) which can influence the eWOM response. It is the first time that the source credibility is investigated as the central route in ELM model.

Foreign subsidiaries incur substantial institutional conformity costs because they have to respond to host-country institutional pressures (Slangen & Hennart, 2008). The purpose of this paper is to study this type of cost from institutional and regulatory perspectives. The authors argue that these costs decrease when the host country adopts concepts of international regulations that multinationals may be familiar with due to their own home country regulation experience. This prior regulatory experience gives foreign subsidiaries an advantage of foreignness (AoF), which can offset their liability of foreignness (LoF).

This study compared the returns on assets of 35 domestic firms with those of foreign subsidiaries in the Brazilian energy industry between 2002 and 2021, using regression dynamic panel data.

The existence of a relationship between the international regulatory norm and the Brazilian regulator has transformed the LoF into an advantage of foreignness to compete with local energy firms. The results also suggest that the better the regulatory quality of the subsidiary’s country of origin, the better its performance in Brazil, as it can reduce compliance costs. Finally, the greater the psychic distance between Brazil and the foreign subsidiary’s home country, the worse its performance.

The research suggests that one of the keys to competitiveness in host countries is local regulatory ties. Prior international regulatory experience gives foreign subsidiaries an asset of foreignness (AoF). This result complements the current institutional and regulatory foreignness studies on emerging economies (Cuervo-Cazurra & Genc, 2008; Mallon et al., 2022) and the institutional asymmetry between home and host country (Mallon & Fainshmidt, 2017).

This research suggests that one of the keys to competitiveness in host countries is local regulatory ties. Prior international regulatory experience gives foreign subsidiaries an asset of foreignness (AoF). This result complements the current institutional and regulatory foreignness studies on emerging economies (Cuervo-Cazurra & Genc, 2008; Mallon et al., 2022) and the institutional asymmetry between home and host country (Mallon & Fainshmidt, 2017). The practical implication is that the relationship between conformity costs, capital budget calculation and strategic planning for internationalization will be related to the governance quality of the home country of multinationals. The social implication is that a country interested in attracting more direct foreign investment to areas that need foreign technology transfer and resources may consider adopting international regulatory standards.

The social implication is that a country interested in attracting more direct foreign investment to areas that need foreign technology transfer and resources may consider adopting international regulatory standards.

This research discuss firm and local regulator tie is one of core competitiveness in host countries (Yang and Meyer, 2020). This study also complements the current institutional and regulatory foreignness studies in emerging economy (Cuervo-Cazurra & Genc, 2008; Mallon et al., 2022). Second, prior regulatory experience of multinational enterprise in similar environment can affect its foreign affiliate performance (Perkins, 2014). Third, this study confirms current literature that argues that knowledge and ability to operate in an institutionalized country can be transferred from parent to affiliate. In the end, this study investigates whether AoF persists when host governments improve the governance of their industries.

The objective of this study was to conduct a bibliometric analysis of the existing literature on organizational deviance to assess how far this concept has progressed since its introduction in the domain of organizational behavior.

This study employs bibliometric methodologies (citation analysis, co-citation analysis and co-occurrence of author keywords) using VOSviewer. The Scopus database was used, as it is the largest database of scholarly literature.

The findings indicate the character and direction of organizational research over the past two decades. Organizational deviance due to psychological contract breach, organizational deviance in the context of organizational cynicism and organizational deviance in the context of psychological capital are the three major themes in the literature on organizational deviance. In addition, the study highlights the most significant authors, journals, institutions and nations in the field of value co-creation research as well as potential future research areas in this area.

The use of a single database and the inability to contextualize the citation structure of papers revealed by the review are limitations of this study.

This study examines the structure of the literature on organizational deviance and charts the field's evolution over time.

This study aims to answer the question of what characterizes organizations with future-potential, and with the help of a model introduced in this study, the authors propose what interventions can be identified and which improvements need to be made in traditional organizations so that they meet the requirements of future-potentiality.

A systematic literature review was conducted to identify management interventions. Citation and co-word analyses were also performed. Content analysis of 311 journal articles from the past five years was performed taking into account relevant keywords, and disciplinary narrowing was also applied. These articles were used to identify knowledge that could be used to suggest micro-, meso- and macro-level changes.

To develop the future potential of organizations, three organizational levels must be separated. The first is the micro level of relations between leaders and employees, where equity is a key value for future potentiality. It should be emphasized that not all employees’ organizational commitment is equally important for organizations with future potential, and leaders should strengthen their commitment according to individual needs and opportunities. The second is the meso level, where the decisive value is organizational moderation, and this suggests that a careful and restrained development is needed both in satisfying consumer needs and in innovation. The third is the macro level, where the defining value is responsibility and sustainability, which are necessary for achieving a state where the active development of national culture becomes possible.

Contrary to the authors’ expectations, it has been found that there are only a few studies dealing with change management for the purpose of achieving a future potential mode of organizational operation; thus, the results can be considered new and will contribute to the development of a cross-section of change management and future studies.

This paper is devoted to prepare micro-cone structure with variable cross-section size by Stereo Lithography Appearance (SLA)-based 3D additive manufacturing technology. It is mainly focused on analyzing the forming mechanism of equipment and factors affecting the forming quality and accuracy, investigating the influence of forming process parameters on the printing quality and optimization of the printing quality. This study is expected to provide a µ-SLA surface preparation technology and process parameters selection with low cost, high precision and short preparation period for microstructure forming.

The µ-SLA process is optimized based on the variable cross-section micro-cone structure printing. Multi-index analysis method was used to analyze the influence of process parameters. The process parameter influencing order is determined and validated with flawless micro array structure.

After the optimization analysis of the top diameter size, the bottom diameter size and the overall height, the influence order of the printing process parameters on the quality of the micro-cone forming is: exposure time (B), print layer thickness (A) and number of vibrations (C). The optimal scheme is A1B3C1, that is, the layer thickness of 5 µm, the exposure time of 3000 ms and the vibration of 64x. At this time, the cone structure with the bottom diameter of 50 µm and the cone angle of 5° could obtain a better surface structure.

This study is expected to provide a µ-SLA surface preparation technology and process parameters selection with low cost, high precision and short preparation period for microstructure forming.

This study aims to elucidate the process and internal mechanism of place identity construction in traditional villages under the impact of tourism by taking Cuandixia village as a case. The research methods comprise participatory observation and in-depth interviews with the residents. The main results are as follows: the impact of tourism on traditional villages is mainly reflected in space reconstruction, livelihood change, social relations restructuring and culture change; under the impact of tourism, the representation of residents’ identity construction shows complexity, with positive and negative effects; and the place identity construction of residents affects their perception of and attitudes toward tourism. Moreover, self-esteem and self-efficacy principles play a key role in their perception of tourism. This study provides some reference for further investigation of the tourism development model and the mental mechanism of residents in traditional villages.

This study seeks to provide a greater understanding of the variables that influence travellers’ intention to participate in social media, paying special attention to (1) the direct impact of perceived usefulness (PU) of social media and (2) the moderating impact of tourists’ altruism and self-interest.

The proposed conceptual model was empirically tested using an online questionnaire distributed to a sample of 394 tourists visiting a World Heritage city.

The findings show that perceived social media usefulness has a significant effect on users’ intention to share experiences. Additionally, self-interest appears to moderate the relationship between perceived social media usefulness and users’ sharing intention, but the results do not support the moderating effect of altruism.

Despite scholars’ growing interest in social networks as sources of tourist information, little is known about the aspects that encourage users’ participation in these platforms. This paper offers key contributions to the relevant literature in this field and offers compelling recommendations for tour operators' management of social networks.

本研究擬讓我們更清楚了解驅使旅行人士參與社交媒體上的交流活動的變數;為求達至這研究目的，研究人員特別對以下兩方面加以注意和研究：(一) 、旅行人士對社交媒體的感知效用所帶來的直接影響;(二) 、旅行人士的利他主義，以及其對個人利益的考慮所帶來的緩和影響。

研究人員對其提出之概念模型進行實證測試，方法乃透過收集一個包含394名曾參觀世界遺產城市的旅行人士的樣本所回應的網上問卷數據，並進行數據分析。

研究結果顯示，旅行人士若覺得社交媒體是有用的話，則他們會更願意在那裡分享旅行經歷;而且，他們對自己個人利益的考慮，似會緩和他們對社交媒體的感知效用與其分享經歷的願意程度之間的關係;唯研究結果沒有證實利他主義會帶來緩和的影響。

雖然學者對社交網絡作為提供資訊的來源感到興趣，而且這興趣不斷增加，但我們對促進旅行人士參與社交網絡平台活動之因素的了解仍然淺薄，就此而言，本研究於有關的文獻提供了重要的貢獻;研究亦為旅遊經營者就應如何管理社交網絡提供了具說服力的建議。

This study aims to provide a systematic and complete knowledge map for use by researchers working in the field of research data. Additionally, the aim is to help them quickly understand the authors' collaboration characteristics, institutional collaboration characteristics, trending research topics, evolutionary trends and research frontiers of scholars from the perspective of library informatics.

The authors adopt the bibliometric method, and with the help of bibliometric analysis software CiteSpace and VOSviewer, quantitatively analyze the retrieved literature data. The analysis results are presented in the form of tables and visualization maps in this paper.

The research results from this study show that collaboration between scholars and institutions is weak. It also identified the current hotspots in the field of research data, these being: data literacy education, research data sharing, data integration management and joint library cataloguing and data research support services, among others. The important dimensions to consider for future research are the library's participation in a trans-organizational and trans-stage integration of research data, functional improvement of a research data sharing platform, practice of data literacy education methods and models, and improvement of research data service quality.

Previous literature reviews on research data are qualitative studies, while few are quantitative studies. Therefore, this paper uses quantitative research methods, such as bibliometrics, data mining and knowledge map, to reveal the research progress and trend systematically and intuitively on the research data topic based on published literature, and to provide a reference for the further study of this topic in the future.

As an advanced manufacturing method, additive manufacturing (AM) technology provides new possibilities for efficient production and design of parts. However, with the continuous expansion of the application of AM materials, subtractive processing has become one of the necessary steps to improve the accuracy and performance of parts. In this paper, the processing process of AM materials is discussed in depth, and the surface integrity problem caused by it is discussed.

Firstly, we listed and analyzed the characterization parameters of metal surface integrity and its influence on the performance of parts and then introduced the application of integrated processing of metal adding and subtracting materials and the influence of different processing forms on the surface integrity of parts. The surface of the trial-cut material is detected and analyzed, and the surface of the integrated processing of adding and subtracting materials is compared with that of the pure processing of reducing materials, so that the corresponding conclusions are obtained.

In this process, we also found some surface integrity problems, such as knife marks, residual stress and thermal effects. These problems may have a potential negative impact on the performance of the final parts. In processing, we can try to use other integrated processing technologies of adding and subtracting materials, try to combine various integrated processing technologies of adding and subtracting materials, or consider exploring more efficient AM technology to improve processing efficiency. We can also consider adopting production process optimization measures to reduce the processing cost of adding and subtracting materials.

With the gradual improvement of the requirements for the surface quality of parts in the production process and the in-depth implementation of sustainable manufacturing, the demand for integrated processing of metal addition and subtraction materials is likely to continue to grow in the future. By deeply understanding and studying the problems of material reduction and surface integrity of AM materials, we can better meet the challenges in the manufacturing process and improve the quality and performance of parts. This research is very important for promoting the development of manufacturing technology and achieving success in practical application.