Search results

Emulsion adhesives can be subdivided on the basis of chemistry to acrylics, styrene‐butadiene latices, styrene‐butadiene/natural rubber blends, vinyl acetate copolymers and natural rubber latices. Acrylics have the advantages of being easily modified by changing the type and amount of polar comonomers. They have excellent ageing characteristics.

Results and discussion Adsorption isotherms of stearic acid on the surface of manganese ore samples:

Oman has a rich built heritage due to its strategic location, making its history full of events, which resulted in remarkable cultural and social heritage. The government works on preserving the built environment through the adaptive reuse strategy of abandoned buildings or sites, which is considered a comprehensive approach to sustainability. The adaptive reuse process often involves complex factors especially through decision-making, which influence the success of the generated project. The research aims at proposing an assessment strategy that offers guidelines that can help to achieve comprehensive adaptive reuse.

This paper analyzes and assesses adaptive reuse interventions of selected five heritage projects in Oman. The assessment was conducted based on semi-structured interviews with stakeholders and local community representatives, as well as onsite observations, documentation and relevant data analyses.

The results display that a comprehensive sustainable management plan for adaptive reuse projects is essential to ensure the success of the new uses in promoting the local economy, enhancing social values, preserving the cultural identity and adapting to the local environment.

This contribution proposes a comprehensive strategy for assessing the adaptive reuse projects' performance that can be used as a checklist for achieving more social, cultural, environmental and economic benefits. This strategy can be further developed by extending to include more categories.

Modifies short and medium alkyd resins using perfluori‐nated urethane toluene isocyanate (PFUTI), and incorporates the modified resins in a set of paint formulations containing different ratios of zinc phosphate as an inhibitive pigment. Achieves promising results and illustrates corrosion‐protective properties in various paint formulations and also a paint formulation free of the inhibitive pigment. Shows enhancement of the corrosion protection efficiencies by the improvement in the hydrophobicity of alkyd resin modified with PFUTI. In view of these results, minimizes or neglects the most expensive inhibitive pigments from an economical standpoint.

Most research has investigated the fear of missing out (FOMO) in the context of online activities, often associated with negative personal outcomes such as fatigue and stress. However, given the increased desire to be informed and included associated with FOMO, organizations that can effectively meet these needs may develop or strengthen social and structural bonds, thereby turning short-term customers with FOMO into lifelong patrons. This study aims to examine the relationship between FOMO and favorable organizational outcomes as mediated by several constructs associated with the desire for information and inclusion.

This research was conducted within the higher education sector of the service industry. FOMO served as the IV. The mediators represented context-specific aspects of campus involvement and inclusion. Organizational outcomes related to the long-term services relationship served as the DVs. The sample consisted of 435 students recruited from research pools at two southern universities in the USA. Exploratory factor analysis, OLS regression and the Hayes–Macro were used to examine the data.

The results demonstrate that FOMO is positively associated with students’ desires for information and inclusion (informal peer interaction, campus involvement, informal faculty interaction, campus information media use and a preference for in-person course scheduling), which are associated with the desirable university outcomes of satisfaction, connection and alumni donation/activity intentions.

If a university fosters unstructured time spent with faculty and peers, and promotes campus information media involvement, students with higher levels of FOMO are more likely to be satisfied, feel connected to the university and report intentions to donate time and money as alumni.

Prior research on FOMO is generally focused on internet and social media use; this study takes a broader perspective and identifies the effect of FOMO on a desire for information and inclusion within a novel context (a service environment). It also associates FOMO with favorable long-term service relationship outcomes that fortify social and structural bonds.

This paper presents the second part of the investigation on resistance to elevated temperatures of a proposed hybrid composite concrete (NCSF-Crete) mix. The composite including nano metakaolin (NC) and steel fibers (SF) in addition to regular concrete components has proven -in the first published part-earlier promoted fresh concrete behavior, and to have reduced loss in compressive strength after exposure to a wide range of elevated temperatures. This presented work evaluates another two critical mechanical characteristics for the proposed composite -namely- splitting and bond strengths.

A modified formula correlating splitting and compressive strength (28 days) based on experiments results for NCSF is proposed and compared to formulas derived for regular concrete in different design codes. Finally, both spitting and bond strengths are evaluated pre- and post-exposure to elevated temperatures reaching 600 °C for two hours.

The proposed NCSF-Crete shows remarkable fire endurance, especially in promoting bond strength as after 600 °C heat exposure tests, it maintained strength equivalent to 70% of a regular concrete control mix at room temperature. Improving residual splitting strength was very significant up to 450 °C exposure.

Obvious deterioration is monitored in splitting resistance for all concretes at 600 °C.

This proposed composite improved elevated heats resistance of the most significant concrete mechanical properties.

Using a more green and sustainable constituents in the composite.

The proposed composite gathers the merits of using NC and SF, each has been investigated separately as an addition to concrete mixes.

Highly efficient heat‐resistant paint formulations based on Egyptian manganese ore (high and medium grades) and silicon resin were prepared. The heat‐resistance efficiency as well as the physico‐mechanical properties of the painted films were evaluated. Promising results were deduced, showing that manganese ore imparts heat‐resistance protection for painted substrate up to 450°C. The anticorrosive properties of these paint formulations were moderate but their efficiency as heat‐resistant anticorrosive paints was improved by adding 1 per cent of melamine to the paint constituents.

This study aims to understand the association between the fear of missing out (FOMO) and its impact on psychological well-being (PWB). The mediating effect of anxiety and moderating effects of social media engagement (SME) and resilience on the association mentioned above are also examined.

The study used a mix of attachment theory and cognitive-motivational-relational theory to understand the hypothesized relationship using a diverse sample of international respondents from South Asia, South East Asia and the Middle East. The data from 612 respondents was collected using SurveyMonkey. The authors have used Hayes’ PROCESS Macro to test the hypothesised relationships.

The results revealed that anxiety acts as a mediator between FOMO and PWB, while SME and resilience act as moderators in reducing the impact of FOMO on anxiety and the impact of anxiety on PWB, respectively.

The work extends the existing theorization and points out the merits of using SME and resilience as moderators and anxiety as a mediator for understanding the association between FOMO and PWB.

Short and medium alkyd resins were modified using perfluorinated urethane toluene isocyanate (PFUTI). The modified resins were incorporated in a set of paint formulations containing different ratios of zinc phosphate as an inhibitive pigment. Promising results were achieved and corrosion protective properties were illustrated in various paint formulations and also in a paint formulation free of the inhibitive pigment. The corrosion protection efficiencies were enhanced by the improvement in the hydrophobicity of alkyd resin modified with perfluorinated toluene isocyanate (PFUTI). These results encourage us to minimize or neglect the most expensive inhibitive pigments from the economic point of view.

The purpose of this paper is to prepare, characterise and evaluate nano-emulsions of copolymers of various compositions as eco-friendly binders for flexographic ink industry.

Various nano-emulsions of copolymers were prepared using styrene (St), butyl acrylate (BuAc), acrylic acid (AA) and acrylamide (AAm) monomers by means of a conventional seeded emulsion polymerisation technique, using K2S2O8 as the initiator. The characterisation of the prepared emulsions was performed using Fourier transform infrared (FT-IR), thermogravimetric analysis (TGA), gel permeation chromatography (GPC) and transmission electron microscopy (TEM). A selection of copolymers was formulated with pigments and additional ingredients, as water-based flexographic inks. The inks were characterised for their viscosity, pH, degree of dispersion, water resistance and colour density.

It was found that the low viscosity of the prepared copolymers may reduce the film thickness of the flexographic inks and may also increase the spreading of the ink on the surface. As a result, stable modified polyacrylate-based latex with improved physico-mechanical properties were obtained. The prepared latexes were showed improving and enhancing in water resistance; gloss values, and the print density that ranged from 2.06 to 2.51 and the maximum gloss values (39 and 48) were also obtained. Also, these binders provide excellent adhesion properties for both the pigment particles and the base paper.

This study focuses on the preparation of new water-based copolymer nanoparticles and their use as eco-friendly binders for flexographic ink industry.

The ink formulations developed could find use in industrial-scale printing.

Eco-friendly environment ink formulations for printing on paper substrates are novel.