Search results

This study aims to improve the reliability of emergency safety barriers by using the subjective safety analysis based on evidential reasoning theory in order to develop on a framework for optimizing the reliability of emergency safety barriers.

The emergency event tree analysis is combined with an interval type-2 fuzzy-set and analytic hierarchy process (AHP) method. In order to the quantitative data is not available, this study based on interval type2 fuzzy set theory, trapezoidal fuzzy numbers describe the expert's imprecise uncertainty about the fuzzy failure probability of emergency safety barriers related to the liquefied petroleum gas storage prevent. Fuzzy fault tree analysis and fuzzy ordered weighted average aggregation are used to address uncertainties in emergency safety barrier reliability assessment. In addition, a critical analysis and some corrective actions are suggested to identify weak points in emergency safety barriers. Therefore, a framework decisions are proposed to optimize and improve safety barrier reliability. Decision-making in this framework uses evidential reasoning theory to identify corrective actions that can optimize reliability based on subjective safety analysis.

A real case study of a liquefied petroleum gas storage in Algeria is presented to demonstrate the effectiveness of the proposed methodology. The results show that the proposed methodology provides the possibility to evaluate the values of the fuzzy failure probability of emergency safety barriers. In addition, the fuzzy failure probabilities using the fuzzy type-2 AHP method are the most reliable and accurate. As a result, the improved fault tree analysis can estimate uncertain expert opinion weights, identify and evaluate failure probability values for critical basic event. Therefore, suggestions for corrective measures to reduce the failure probability of the fire-fighting system are provided. The obtained results show that of the ten proposed corrective actions, the corrective action “use of periodic maintenance tests” prioritizes reliability, optimization and improvement of safety procedures.

This study helps to determine the safest and most reliable corrective measures to improve the reliability of safety barriers. In addition, it also helps to protect people inside and outside the company from all kinds of major industrial accidents. Among the limitations of this study is that the cost of corrective actions is not taken into account.

Our contribution is to propose an integrated approach that uses interval type-2 fuzzy sets and AHP method and emergency event tree analysis to handle uncertainty in the failure probability assessment of emergency safety barriers. In addition, the integration of fault tree analysis and fuzzy ordered averaging aggregation helps to improve the reliability of the fire-fighting system and optimize the corrective actions that can improve the safety practices in liquefied petroleum gas storage tanks.

The decision-making to outsource and select the most suitable global manufacturing outsourcing partner (MOP) is complex and uncertain due to multiple conflicting qualitative and quantitative criteria as well as multiple alternatives. Vagueness and variability exist in ratings of criteria and alternatives by group of decision-makers (DMs). The paper provides a novel Stochastic Fuzzy (SF) method for evaluation and selection of agile and sustainable global MOP in uncertain and volatile business environment.

Four main selection criteria for global MOP selection were identified such as economic, agile, environmental and social criteria. Total 16 sub-criteria were selected. To consider the vagueness and variability in ratings by group of DMs, SF method using t-distribution or z-distribution was adopted. The criteria weights were determined using the Stochastic Fuzzy-CRiteria Importance Through Intercriteria Correlation (SF-CRITIC), while MOP selection was carried out using Stochastic Fuzzy-VIseKriterijumskaOptimizacija I KompromisnoResenje (SF-VIKOR) in the case study of footwear industry. Sensitivity analysis was performed to test the robustness of the proposed model. A comparative analysis of SF-VIKOR and VIKOR was made.

The worker’s wages and welfare, product price, product quality, green manufacturing process and collaboration with partners are the most important criteria for MOP selection. The MOP3 was found to be the best agile and sustainable global MOP for the footwear company. In sensitivity analysis, significance level is found to have important role in MOP ranking. Hence, the study concluded that integrated SF-CRITIC and SF-VIKOR is an improved method for MOP selection problem.

In a group decision-making, ambiguity, impreciseness and variability are found in relative ratings. Fuzzy variant Multi-Criteria Decision-Making methods cover impreciseness in ratings but not the variability. On the other hand, deterministic models do not cover either. Hence, the stochastic method based on the probability theory combining fuzzy theory is proposed to deal with decision-making problems in imprecise and uncertain environments. Most notably, the proposed model has novelty as it captures and reveals both the stochastic perspective and the fuzziness perspective in rating by group of DMs.

The proposed multi-criteria group decision-making model contributes to the sustainable and agile footwear supply chain management and will help the policymakers in selecting the best global MOP.

To the best of the authors’ knowledge, SF method has not been used to select MOP in the existing literature. For the first time, integrated SF-CRITIC and SF-VIKOR method were applied to select the best agile and sustainable MOP under uncertainty. Unlike other studies, this study considered agile criteria along with triple bottom line sustainable criteria for MOP selection. The novel method of SF assessment contributes to the literature and put forward the managerial implication for improving agility and sustainability of global manufacturing outsourcing in footwear industry.

The main purpose of this study is to provide a comprehensive review and critical insights of the application of fuzzy methods in modeling, assessing and understanding the various aspects of green and sustainable supply chains (SSCs).

The present study conducts a systematic literature review (SLR) and bibliometric analysis of 252 research articles. This study employs various tools such as VOSviewer version 1.6.10, Publish or Perish, Mendeley and Excel that aid in descriptive analysis, bibliometric analysis and network visualization. These tools have been used for performing citation analysis, top authors' analysis, co-occurrence of keywords, cluster and content analysis.

The authors have divided the literature into seven application areas and discussed detailed insights. This study has observed that research in the social sustainability area, including various issues like health and safety, labor rights, discrimination, etc. is scarce. Integration of the Industry 4.0 technologies like blockchain, big data analytics, Internet of Things (IoT) with the sustainable and green supply chain (GSC) is a promising field for future research.

The authors' contribution primarily lies in providing the integrated framework which shows the changing trends in the use of fuzzy methods in the sustainability area classifying and consolidating green and sustainable supply chain management (SSCM) literature in seven major areas where fuzzy methods are predominantly applied. These areas have been obtained after the analysis of clusters and content analysis of the literature presenting key insights from the past and developing the conceptual framework for future research studies.

In this study, a novel framework was proposed to assess the trust in e-government (e-Gov) services under an uncertain environment. The proposed framework was applied in Iranian municipality websites of e-Gov services to evaluate the readiness score of trust in e-Gov services.

A unique hybrid research methodology was proposed. In the first phase, a comprehensive set of indices were determined from an extensive literature review and finalized by employing the fuzzy Delphi method. In the second phase, interval-valued intuitionistic fuzzy set (IVIFS) -was utilized to model the problem's uncertainty with analytic called IVIFS- hierarchy process (AHP) to determine the importance of indices and indicators by assigning the weights. In the third phase, the fuzzy evaluation method (FEM) is followed for assessing the readiness score of indices in case studies.

The findings indicated that “Trust in government” is the most significant index affecting citizen's trust in e-Gov services while “Maintenance and support” has the least impact on user's intention to use e–Gov services.

The study contributes by introducing a unique research methodology that integrates three phases, including fuzzy Delphi, IVIFS AHP and fuzzy evaluation method. Moreover, the fuzzy sets theory helps to reach a more accurate result by modeling the inherent ambiguity of indicators and indices. Interval-valued intuitionistic fuzzy models the ambiguity of experts' judgments in an interval.

The study helps policy makers to monitor wider aspects of trust in e-Gov services as well as understanding their importance. The study enables policy makers to apply the framework to any potential case studies to evaluate the readiness score of indices and recognizing strengths and weakness of trust dimensions as well as recommending advice for improving the situation.

The study is one of the few to indicate significant indices of trust in e-Gov services in developing countries. The study shows the importance of indicators and indices by assigning a weight. Additionally, the framework can assess the readiness score of various case studies.

This paper aims to conduct a fuzzy discrete time cost quality risk in the ambiguous mode CO_{2 tradeoff problem} (FDTCQRP*TP) in a megaproject based on fuzzy ground.

A combinatorial evolutionary algorithm using Fuzzy Invasive Weed Optimization (FIWO) is used in the discrete form of the problem where the parameters are fully fuzzy multi-objective and provide a space incorporating all dimensions of the problem. Also, the fuzzy data and computations are used with the Chanas method selected for the computational analysis. Moreover, uncertainty is defined in FIWO. The presented FIWO simulation, its utility and superiority are tested on sample problems.

The reproduction, rearrangement and maintaining elite invasive weeds in FIWO can lead to a higher level of accuracy, convergence and strength for solving FDTCQRP*TP fuzzy rules and a risk ground in the ambiguous mode with the emphasis on the necessity of CO₂ pollution reduction. The results reveal the effectiveness of the algorithm and its flexibility in the megaproject managers' decision making, convergence and accuracy regarding CO₂ pollution reduction.

This paper offers a multi-objective fully fuzzy tradeoff in the ambiguous mode with the approach of CO₂ pollution reduction.

This paper aims to contribute significantly to the empirical investigations on adopting Industry 4.0–circular economy in the Malaysian palm oil industry. The paper also aims to theorise and empirically assess a comprehensive model incorporating three aspects and 51 criteria.

A two-stage methodology is proposed using the fuzzy Delphi method and the fuzzy-based analytical network process. Twenty-seven criteria on adoptability of industry 4.0–circular economy were selected for the first-stage methodology, followed by identifying each criteria's intersection with the overall objectives.

The findings indicate that financial constraints, the lack of a collaborative I4.0–CE model, laws and policy, low management support and the training of dedicated employers in I4.0–CE-application are the top five criteria requiring critical attention from the POI.

The overall sustainability advantages of the POI are identified and discussed in depth to establish criteria for industry 4.0–circular economy applications.

This study fills the previous research gap by theoretically explaining POI's industry 4.0 adoption–circular economy from the perspective of two underpinning theories. Due to the pressure towards sustainability, the industry must be ready to adopt industry 4.0–circular economy applications, and resources must be managed appropriately and effectively by sharing and integrating. Advanced industry 4.0 technologies and pragmatic practices such as a circular economy are needed to achieve optimal sustainable development while retaining commercial success.

The purpose of this paper is to identify the radio frequency identification (RFID) strategic value attributes (RFIDSVAs) mechanism selections preferences and also integration of RFID tags with technology coordination tools (IRTWTCTs) alternatives ranking performance decisions in supply chain management (SCM). RFID-enabled techno-economic feasibility decisions are enhancing the SC visibility in apparel supply chains (ASCs). The RFIDSVAs mechanism selections have performed significant agility to strategic competitive advantages, namely, inventory visibility, multi-tags ownership transfer within trusted third party, etc.

Fuzzy analytical hierarchy process (FAHP) and FAHP-fuzzy Technique for Order of Preference by Similarity to Ideal Solution (FTOPSIS) approaches have been used to evaluate the quantitative assessment of RFIDSVA mechanisms selection decision based on weight priority orders and IRTWTCTs alternatives selection in ASC networks. The comparison of FAHP and FAHP-FTOPSIS approaches to evaluate the integrated framework develop in RFIDSVAs mechanisms and IRTWTCTs alternatives selection decisions in Indian multi-tier ASC networks.

The result found that the FAHP-FTOPSIS approaches have used to prioritizing the RFIDSVA mechanism selection weights and also identify the IRTWTCTs alternatives ranking preferences order in apparel SCM. The comparison between the FAHP and FAHP-FTOPSIS approach to quantitative assessments from RFIDSVA mechanisms and IRTWTCTs alternatives selection decisions, which enable them SC agility potential across multi-tier visibility in ASC networks. ASC stakeholders can be benefited by techno-economic feasibility decisions, RFID-enabled shop floor activities, multi-tags ownerships transfer in SCs and knowledge-based cryptography tags/items separation in SCs.

The research work has considered only five RFIDSVA mechanisms and also three integration of RFIDTWTCTs alternatives in multi-tier ASC. The strategic competitive advantages are achieved by RFID-enabled break-even tags price decisions and also techno-economic feasibility decision by contractual design multi-tier SC stakeholder’s involvements.

The pilot project study explores that the quantitative assessment decision has based on RFID-enable techno-economic feasibility in ASCs. Stakeholders can be benefited by inventory control of the financial losses, reducing the inventory inaccuracies and multi-tags ownership transfer within trusted third-party traceability in ASC networks.

This study explores the RFID-enabled apparel SC process and activities visibility (natural fibre’s fibre producer, fibre dyeing producer, yarn spinning producer, knitting and finishing producer).

Supplier evaluation and selection is an essential (multi-criteria decision-making) MCDM process that considers qualitative and quantitative factors. This research work attempts to use a MCDM technique based on merging fuzzy Technique for Order Preference by Similarity to Ideal Solution (F-TOPSIS) and Quality Function Deployment (QFD) ideas. The study attempts to find the supplier's attributes (HOWs) to accomplish its goals after determining the product's characteristics to suit the company's needs (WHATs).

The proposed research methodology comprises the following four steps: Step 1: Determine the product purchase requirements (“WHATs”) and those pertinent to supplier evaluation (“HOWs”). In Step 2, the relative importance of the “WHAT-HOW” correlation scores is determined and also the resulting weights of “HOWs”. In Step 3, linguistic evaluations of possible suppliers in comparison to subjective criteria are given to the decision-makers. Step 4 combines the QFD and F-TOPSIS techniques to select suppliers.

A fuzzy MCDM method based on fusing and integrating fuzzy information and QFD is presented to solve the drawbacks of conventional decision-making strategies used in supplier selection. Using the F-TOPSIS method, fuzzy positive ideal solution (FPIS) and fuzzy negative ideal solution (FNIS), the relative closeness coefficient values for all alternatives are computed. The suppliers are ranked by relating the closeness of coefficient values. This method permits the combination of ambiguous and subjective data expressed as fuzzy-defined integers or linguistic variables.

QFD and TOPSIS, two widely used approaches, are combined in this article to rank and evaluate suppliers based on the traits that the suppliers choose to prioritize. This study demonstrates that the method employed could address multiple-criteria decision-making scenarios in a computationally efficient manner. The effectiveness and applicability of the method are illustrated using an example.

This study aims to propose a facilitating methodology for the application of Fuzzy FMEA (Failure Mode and Effect Analysis), comparing the traditional approach with fuzzy variations, supported by a case application in the aeronautical sector.

Based on experts' opinions in risk analysis within the aeronautical sector, rules governing the relationship between severity, occurrence, detection and risk factor were defined. This served as input for developing a fuzzyfied FMEA tool using the Matlab Fuzzy Logic Toolbox. The tool was applied to the sealing process in a company within the aeronautical sector, using triangular and trapezoidal membership functions, and the results were compared with the traditional FMEA approach.

The results of the comparative application of traditional FMEA and fuzzyfied FMEA using triangular and trapezoidal functions have yielded valuable insights into risk analysis. The findings indicated that fuzzyfied FMEA maintained coherence with the traditional analysis in identifying higher-risk effects, aligning with the prioritization of critical failure modes. Additionally, fuzzyfied FMEA allowed for a more refined prioritization by accounting for variations in each variable through fuzzy rules, thereby improving the accuracy of risk analysis and providing a more realistic representation of potential hazards. The application of the developed fuzzyfied FMEA approach showed promise in enhancing risk assessment in the aeronautical sector by considering uncertainties and offering a more detailed and context-specific analysis compared to conventional FMEA.

This study emphasizes the potential of fuzzyfied FMEA in enhancing risk assessment by accurately identifying critical failure modes and providing a more realistic representation of potential hazards. The application case reveals that the proposed tool can be integrated with expert knowledge to improve decision-making processes and risk mitigation strategies within the aeronautical industry. Due to its straightforward approach, this facilitating methodology could also prove beneficial in other industrial sectors.

This paper presents the development and application of a facilitating methodology for implementing Fuzzy FMEA, comparing it with the traditional approach and incorporating variations using triangular and trapezoidal functions. This proposed methodology uses the Toolbox Fuzzy Logic of Matlab to create a fuzzyfied FMEA tool, enabling a more nuanced and context-specific risk analysis by considering uncertainties.

Spaciousness is defined as “the feeling of openness or room to wander” that has been affected by various physical factors. The purpose of this paper is to assess the spaciousness of space to determine how spacious the space is. Furthermore, the study intends to propose a fuzzy-based model to assess the degree of spaciousness in terms of physical parameters such as area, proportion, the ratio of window area to floor area and color value.

Fuzzy logic is the most appropriate mathematical model to assess uncertainty using nonhomogeneous variables. In contrast to conventional methods, fuzzy logic depends on partial truth theory. MATLAB Fuzzy Logic Toolbox was used as a computational model including a fuzzy inference system (FIS) using linguistic variables called membership functions to define parameters. As a result, fuzzy logic was used in this study to assess the spaciousness degree of design studios in universities in the Iraqi Kurdistan region.

The findings of the presented fuzzy model show the degree to which the input variables affect a space perceived as larger and more spacious. The relationship between parameters has been represented in three-dimensional surface diagrams. The positive relationship of spaciousness with the area, window-to-floor area ratio and color value has been determined. In contrast, the negative relationship between spaciousness and space proportion is described. Moreover, the three-dimensional surface diagram illustrates how the changes in the input values affect the spaciousness degree. Besides, the improvement in the spaciousness degree of the design studio increases the quality learning environment.

This study attempted to assess the degree of spaciousness in design studios. There has been no attempt carried out to combine educational space learning environments and computational methods. This study focused on the assessment of spaciousness using the MATLAB Fuzzy Logic toolbox that has not been integrated so far.