Search results
1 – 10 of 225Jamiu Adetayo Dauda, Suraj A. Rahmon, Ibrahim A. Tijani, Fouad Mohammad and Wakeel O. Okegbenro
The purpose of this study is to find the optimum design of Reinforced Concrete (RC) pile foundation to enable efficient use of structural concrete with greater consequences for…
Abstract
Purpose
The purpose of this study is to find the optimum design of Reinforced Concrete (RC) pile foundation to enable efficient use of structural concrete with greater consequences for global environment and economy.
Design/methodology/approach
A non-linear optimisation technique based on the Generalised Reduced Gradient (GRG) algorithm was implemented to find the minimum cost of RC pile foundation in frictional soil. This was achieved by obtaining the optimum pile satisfying the serviceability and ultimate limit state requirements of BS 8004 and EC 7. The formulated structural optimisation procedure was applied to a case study project to assess the efficiency of the proposed design formulation.
Findings
The results prove that the GRG method in Excel solver is an active, fast, accurate and efficient computer programme to obtain optimum pile design. The application of the optimisation for the case study project shows up to 26% cost reduction compared to the conventional design.
Research limitations/implications
The design and formulation of design constraints will be limited to provisions of BS 8004 and EC 7.
Practical implications
Since the minimum quantity of concrete was attained through optimisation, then minimum cement will be used and thus result in minimum CO2 emission. Therefore, the optimum design of concrete structures is a vital solution to limit the damage to the Earth's climate and the physical environment resulting from high carbon emissions.
Originality/value
The current study considers the incorporation of different soil ground parameters in the optimisation process rather than assuming any pile capacity value for the optimisation process.
Details
Keywords
Nicolas Renon, Pierre Montmitonnet and Patrick Laborde
Purpose – The aim of this work is to provide a global 3D finite element (FE) model devoted to the modelling of superficial soil ploughing in the large deformation range and for a…
Abstract
Purpose – The aim of this work is to provide a global 3D finite element (FE) model devoted to the modelling of superficial soil ploughing in the large deformation range and for a vast class of soil treatment tools. Design/methodology/approach – We introduced soil constitutive equation in a FE software initially designed for the metal forming. We performed the numerical integration of the non‐linear ploughing problem. Non‐linearities encountered by the problem can be summed up: as soil constitutive equation (idealized with non‐associated compressible plastic law), unilateral frictional contact conditions (with a rigid body), geometrical non‐linearities (the ploughing tool) and large deformation range. To handle such difficulties we performed several numerical methods as implicit temporal scheme, Newton‐Raphson, non‐symmetric iterative solver, as well as proper approximation on stress and strain measures. Findings – Main results deal with the validation of the integration of the non‐linear constitutive equation in the code and a parametric study of the ploughing process. The influence of tool geometric parameters on the soil deformation modes and on the force experienced on the tools had been point out. As well, the influence of soil characteristics as compressibility had been analyzed. Research limitations/implications – This research is devoted to perform a numerical model applicable for a large range of soil treatment tools and for a large class of soil. However, taking into account all kind of soil is utopist. So limitations met are essentially related to the limit of the accuracy of the elasto‐plastic idealization for the soil. Practical implications – In practice the numerical model exposed in the paper can clearly help to improve and optimize any process involving superficial soil submitted to the mechanical action of a rigid body. Originality/value – The original value of the paper is to provide a global and an applicable numerical model able to take into account the main topics related to the ploughing of superficial soils. Industrials in geotechnics, in agriculture or in military purposes can benefit in using such numerical model.
Details
Keywords
Johan Clausen, Lars Damkilde and Lars Vabbersgaard Andersen
The purpose of this paper is to present several methods on how to deal with yield surface discontinuities. The explicit formulations, first presented by Koiter (1953), result in…
Abstract
Purpose
The purpose of this paper is to present several methods on how to deal with yield surface discontinuities. The explicit formulations, first presented by Koiter (1953), result in multisingular constitutive matrices which can cause numerical problems in elasto-plastic finite element calculations. These problems, however, are not documented in previous literature. In this paper an amendment to the Koiter formulation of the constitutive matrices for stress points located on discontinuities is proposed.
Design/methodology/approach
First, a review of existing methods of handling yield surface discontinuities is given. Examples of the numerical problems of the methods are presented. Next, an augmentation of the existing methods is proposed and its robustness is demonstrated through footing bearing capacity calculations that are usually considered “hard”.
Findings
Previous studies documented in the literature all present “easy” calculation examples, e.g. low friction angles and few elements. The amendments presented in this paper result in robust elasto-plastic computations, making the solution of “hard” problems possible without introducing approximations in the yield surfaces. Examples of “hard” problems are highly frictional soils and/or three-dimensional geometries.
Originality/value
The proposed method makes finite element calculations using yield criteria with corners and apices, e.g. Mohr-Coulomb and Hoek-Brown, much more robust and stable.
Details
Keywords
Hongxiang Tang, Yuhui Guan, Xue Zhang and Degao Zou
This paper aims to develop a finite element analysis strategy, which is suitable for the analysis of progressive failure that occurs in pressure-dependent materials in practical…
Abstract
Purpose
This paper aims to develop a finite element analysis strategy, which is suitable for the analysis of progressive failure that occurs in pressure-dependent materials in practical engineering problems.
Design/methodology/approach
The numerical difficulties stemming from the strain-softening behaviour of the frictional material, which is represented by a non-associated Drucker–Prager material model, is tackled using the Cosserat continuum theory, while the mixed finite element formulation based on Hu–Washizu variational principle is adopted to allow the utilization of low-order finite elements.
Findings
The effectiveness and robustness of the low-order finite element are verified, and the simulation for a real-world landslide which occurred at the upstream side of Carsington embankment in Derbyshire reconfirms the advantages of the developed elastoplastic Cosserat continuum scheme in capturing the entire progressive failure process when the strain-softening and the non-associated plastic law are involved.
Originality/value
The permit of using low-order finite elements is of great importance to enhance computational efficiency for analysing large-scale engineering problems. The case study reconfirms the advantages of the developed elastoplastic Cosserat continuum scheme in capturing the entire progressive failure process when the strain-softening and the non-associated plastic law are involved.
Details
Keywords
A simple procedure for accurate calculation of pore pressures in undrained elasto‐plastic materials is described. An 8‐node element is used, with ‘reduced’ integration during…
Abstract
A simple procedure for accurate calculation of pore pressures in undrained elasto‐plastic materials is described. An 8‐node element is used, with ‘reduced’ integration during stress redistribution, and ‘full’ integration to form the global stiffness matrix for the modified Newton—Raphson procedure. An analysis of passive earth pressure in an undrained soil is used to demonstrate the algorithm and computed results are compared with a closed‐form solution.
Honggui Di, Yuyin Jin, Shunhua Zhou and Di Wu
The application of servo steel struts enables the active control of the excavation-induced deformation in foundation pits. However, there is currently only one design axial force…
Abstract
Purpose
The application of servo steel struts enables the active control of the excavation-induced deformation in foundation pits. However, there is currently only one design axial force for each servo steel strut, which requires in-situ axial force adjustments based on the experience of site engineers. The purpose of this study is to develop a method for determining the design axial forces of servo steel struts at different excavation steps.
Design/methodology/approach
In this study, a hybrid method for determining the design axial forces of servo steel struts in different excavation steps was established based on the combination of the elastic foundation beam model and nonlinear optimisation.
Findings
The hybrid method is capable of providing a better set of design axial forces than the original design method. The lateral wall displacement and bending moment could be better controlled. Ordinary steel struts should be prevented from being set between servo steel struts to avoid axial force losses.
Practical implications
The axial forces of the servo steel struts at different excavation steps should be designed to achieve better deformation control effects. Moreover, a well-designed set of axial forces can also reduce the internal forces of the retaining structure.
Originality/value
The hybrid method enables the determination of the design axial forces of servo steel struts at different excavation steps, which can guide axial force adjustments in practical projects.
Details
Keywords
Selma Bahi and Mohamed Nabil Houhou
This study aims to investigate the behavior of different types of stone columns, including the short and floating columns, as well as the ordinary and the geosynthetic encased…
Abstract
Purpose
This study aims to investigate the behavior of different types of stone columns, including the short and floating columns, as well as the ordinary and the geosynthetic encased stone columns (OSC and GESC). The effectiveness of the geosynthetic encasement and the impact of the installation using the lateral expansion method on the column performance is evaluated through a three-dimensional (3D) unit cell numerical analysis.
Design/methodology/approach
A full 3D numerical analysis is carried out using the explicit finite element code PLAXIS 3D to examine the installation influence on settlement reduction (ß), lateral displacement (Ux) and vertical displacement (Uz) relative to different values of lateral expansion of the column (0% to 15%).
Findings
The findings demonstrate the superior performance of GESC, particularly short columns outperforming floating counterparts. This enhanced performance is attributed to the combined effects of geosynthetic encasement and increased lateral expansion. Notably, these strategies contribute significantly to decreasing lateral displacement (Ux) at the column’s edge and reducing vertical displacement (Uz) under the rigid footing.
Originality/value
In contrast to previous studies that examined the installation effect of OSC contexts, this paper presents a comprehensive investigation into the effect of geosynthetic encasement and the installation effects using the lateral expansion method in very soft soil, using 3D numerical simulation. The study emphasizes the significance of the consideration of geosynthetic encasement and lateral expansion of the column during the design process to enhance column performance.
Details
Keywords
Outlines the threat posed by landslides in Great Britain, andexamines the ways in which potential problems can be identified andaccommodated by developers and engineers in the…
Abstract
Outlines the threat posed by landslides in Great Britain, and examines the ways in which potential problems can be identified and accommodated by developers and engineers in the light of changes in the Building Regulations for England and Wales which took effect on 1 June 1992. Explores the causes of landsliding, and suggests the appropriate investigations which should be instigated by the developer if suspecting instability. Discusses remedial measures and presents a study of landslide management with the example of Ventnor on the Isle of Wight. Mentions the Planning Policy Guidance issued by the Department of the Environment, which advises local authorities, landowners and developers on the role of planning controls as a landslide management tool.
Details
Keywords
Annan Jiang, Shuai Zheng and Shanyong Wang
This paper aims at the problem of surrounding rock excavation damage zone of tunneling in the rich water region, this paper aims to propose a new seepage-stress-damage coupling…
Abstract
Purpose
This paper aims at the problem of surrounding rock excavation damage zone of tunneling in the rich water region, this paper aims to propose a new seepage-stress-damage coupling model and studied the numerical algorithm. This reflects the characteristics of rock damage evolution, accompanied by plastic flow deformation and multi-field interaction.
Design/methodology/approach
First of all, rock elastoplastic damage constitutive model based on the Drucker–Prager criterion is established, the fully implicit return mapping algorithm is adopted to realize the numerical solution. Second, based on the relation between damage variation and permeability coefficient, the rock stress-seepage-damage model and multi-field coupling solving iterative method are presented. Finally, using the C++ language compiled the corresponding programs and simulated tunnel engineering in the rich water region.
Findings
Results show that difference evolution-based back analysis inversed damage parameters well, at the same time the established coupling model and calculating program have more advantages than general conventional methods. Multiple field coupling effects should be more considered for the design of tunnel support.
Originality/value
The proposed method provides an effective numerical simulation method for the construction of the tunnel and other geotechnical engineering involved underground water problems.
Details
Keywords
The purpose of this paper is to study the distribution of active earth pressure in retaining walls with narrow cohesion less backfill considering arching effects.
Abstract
Purpose
The purpose of this paper is to study the distribution of active earth pressure in retaining walls with narrow cohesion less backfill considering arching effects.
Design/methodology/approach
To this end, the approach of principal stresses rotation was used to consider the arching effects.
Findings
According to the presented formulation, the active soil pressure distribution is nonlinear with zero value at the wall base. The proposed formulation implies that by increasing the frictional forces at both sides of the backfill, the arching effect is increased and so, the lateral earth pressure on the retaining wall is decreased. Also, by narrowing the backfill space, the lateral earth pressure is extremely decreased.
Originality/value
A comprehensive analytical solution for the active earth pressure of narrow backfills is presented, such that the effects of the surcharge and the characteristics of the stable back surface are considered. The magnitude and height of the application of lateral active force are also derived.
Details