Search results

This paper aims to study the color change kinetics of lac dye in response to pH and food spoilage metabolites (ammonia, lactic acid and tyramine) for its potential application in intelligent food packaging.

UV-Vis spectroscopy was used to study the color change of dye solution. Ratio of absorbance of dye solution at 528 nm (peak of ionized form) to absorbance at 488 nm (peak of unionized form) was used to study the color change. Color change kinetics was studied in terms of change in absorbance ratio (A528/A488) with time using zero- and first-order reaction kinetics. An indicator was prepared by incorporating lac dye in agarose membrane to validate the result of study for monitoring quality of raw milk.

Dye was orange-red in acidic medium (pH: 2 to 5) and exhibited absorbance peak at 488 nm. It turned purple in alkaline medium (pH: 7 to10) and exhibited absorbance peak at 528 nm. The change in absorbance ratio with pH followed zero-order model. Acid dissociation constant (pKa) of dye was found to be 6.3. Color change of dye in response to ammonia and tyramine followed zero-order reaction kinetics, whereas for lactic acid, the first-order model was found best. In the validation part, the color of the indicator label changed from purple to orange-red when the milk gets spoiled.

The study opens a new application area for lac dye. The results suggest that lac dye has potential to be used as an indicator in intelligent food packaging for detection of spoilage in seafood, meat, poultry and milk.

This study aims to investigate the effect of spray drying temperature and maltodextrin addition on the contents of phenolics, flavonoids, anthocyanins and antioxidant activities (2,2-diphenyl-1-picrylhydrazyl [DPPH] radical scavenging activity, ferric reducing antioxidant power and reducing power) of karonda powder.

Over the past few decades, the demands for application of natural colorants in food production have been attracting the attention of academic research and food industry. Anthocyanins, a red pigment commonly found on plants, show high potentials in the preparation of spray-dried pigment powder. This study, therefore, was conducted using full factorial design with two factors, namely, inlet temperature (150°C and 160°C) and soluble solid concentration (10, 15 and 20°Brix) with maltodextrin as carrier to produce pigment powder from karonda, an anthocyanin-rich fruit which is native to southeast Asia.

Increasing soluble solid content from 10 to 15°Brix resulted in a 42%–57% reduction in phenolic, flavonoid and anthocyanin contents. However, when increasing the amount of maltodextrin from 15 to 20°Brix, a lower reduction (approximately 11%–19%) was observed. In samples with the same °Brix, there was no significant variation in antioxidant contents and activities, especially at high maltodextrin ratios. In addition, the reducing power of samples dried at higher temperature (160°C) was higher than that of samples dried at lower temperature. Karonda spray-dried powder showed a good positive correlation (p < 0.01) between antioxidant contents and DPPH• activity.

To the best of the authors’ knowledge, in this study, for the first time, the effect of spray drying conditions on the quality of karonda powder was investigated.

The purpose of this study is to address consumer’s preference of natural pigments over synthetic ones and their use in various product developments rather than using synthetic colours. A budding interest of using natural pigments has made researchers to explore several techniques for their stabilization and application in different food products.

In this review, four major natural pigments with potential health benefits have been studied. Betalins, carotenoids, anthocyanins and chlorophylls, in spite of having excellent bio-functional and therapeutic profile, are found to be unstable. Therefore, various nanoencapsulation techniques are used to increase their stability along with their therapeutic properties.

Nanoencapsulation of natural pigments improves their stability, their effect on therapeutic properties and their application in different food products. These findings could be attributed to the encapsulating material as it acts as a barrier and ushers changes in the matrix of natural pigments. Also, nanoencapsulation not only increases stability but also provides several health benefits such as anti-inflammation, anti-cancer, anti-allergic and anti-thrombotic properties.

This paper highlights the openings for the use of nanoencapsulation of natural pigments to stabilize them and use them as a potential colourant and functional ingredient in different food products. Phenols, carotenoids and antioxidant activity are the major factors that are responsible for promoting several health benefits.

Agricultural waste and food sources are some of the pollutants of the environment. One of these wastes is the peel of fruits that cannot be consumed as food. In this regard, walnut husk (WH) and oleaster peel (PO) are known as two important sources of tannin and are bulky wastes. Because of the high percentage of tannin, these materials can be used as a natural source for the preparation of bio-mordant in the dyeing process.

In this study, Reseda and Madder were used as natural dyes in the presence of a mixture of two bio-mordants. WH and PO were selected as bio-mordant. All natural resources are extracted to obtain the juice. The phenolic percentage of tannin-containing extracts was evaluated and then it was used for wool yarns by premordanting method. The results of evaluating the fastness properties using the ISO method.

The most important achievement of this research is the use of agricultural waste in the dyeing process to reduce environmental pollution and create added value. All compounds rich in tannin have some phenolic components, therefore the amount of phenolic content of these extracts was evaluated. The effect of mixing the mordant on the color characteristics of the yarns was investigated and the results showed that changing the ratio of the combination of two mordant is effective on the K/S values. The results of evaluating the fastness properties using the ISO method showed that the washing, rubbing and light fastness in the presence of mordant is good, good and moderate, respectively.

In this paper, to the best of the authors’ knowledge, for the first time, the combination of two natural extracts obtained from agricultural waste has been used to create a new bio-mordant on fibers and improve stability.

The objective of this study was to evaluate the technical-economic process efficiency of obtaining simultaneous lipo-soluble (LSF) and water-soluble (WSF) fractions from annatto seeds.

The batches of annatto seeds were submitted to the refrigerated solid-liquid extraction process in four stages: pre-extraction, aqueous extraction, separation by decantation and filtration. After that, LSF and WSF from annatto seeds were obtained. The process efficiency and the quality of LSF and WSF were analyzed in terms of average yield and bioactive compounds (bixin, norbixin, phenolics and flavonoids) and their antioxidant and antimicrobial activities. Furthermore, they were economically evaluated in terms of costs of manufacturing and profitability parameters.

The process was efficient in terms of overall average yield (LSF = 8.68% and WSF = 2.76%) (w/w) and in terms of quality, mainly with higher average yields of bixin (82.34% in LSF) and norbixin (29.59% in WSF) (w/w). The concentration of bioactive compounds in the fractions promoted an increase in inhibiting free radicals (DPPH* and ABTS*+) and in the ferric-reducing power (FRAP). LSF showed a minimum inhibitory concentration of 0.06 mg mL-1 for S. aureus and 0.13 mg mL-1 for S. Typhimurium and S. Enteritidis. The lowest manufacturing costs were obtained for the LSF due to its higher extraction yield compared to the WSF. Plants on an industrial scale of 100 and 1000 L were considered economically viable, with a return on investment of 5 and 2 years.

Thus, fractions (WSF and LSF) can be applied as natural additives, as sources of bioactive compounds for nutraceutical and/or pharmaceutical, and in the development of other innovative processes. These results have practical applicability for pharmaceutical and food industry.

1. Green processing of annatto seeds obtains fractions rich in antioxidant compounds.

2. Efficiently presents a high yield of bixin and other bioactive compounds.

3. Effective in concentrating compounds that inhibit microbial growth.

4. Fractions are more accessible sources of bioactive compounds for isolation.

5. Cost of manufacturing (COM) and profitability are studied.

Green processing of annatto seeds obtains fractions rich in antioxidant compounds.

Efficiently presents a high yield of bixin and other bioactive compounds.

Effective in concentrating compounds that inhibit microbial growth.

Fractions are more accessible sources of bioactive compounds for isolation.

Cost of manufacturing (COM) and profitability are studied.

This study aims to identify the bioactive compounds in the Onion (Allium burdickii [A.B]) bulb using Raman and Fourier transform infrared spectroscopy (FTIR) spectroscopy. It assessed the extraction conditions of bioactive compounds from A.B. while evaluating the best extraction conditions.

The research opted for an experimental qualitative approach. It examined the extraction conditions of A.B., namely, temperature (°C), time (min) and mass-to-liquor ratio (M:R) using ultraviolet-visible spectrophotometry. Identification of bioactive compounds present in the dye was performed using Raman spectroscopy and the validation of the results was done by FTIR spectroscopy.

The study determined the best extraction conditions (time, temperature, M:R) for A.B bulb. The study confirmed the presence of bioactive compounds.

The limitation was quantification of bioactive compounds in A.B bulb.

The findings prove that the A.B. bulb can provide a sustainable source of bioactive compounds (functionalized compounds). The study provides suitable extraction conditions for A.B. and further elaborates on the techniques for identifying bioactive compounds in A.B. bulb extracts.

The study provides A.B. as a source of bioactive compounds and a clean dye for textile coloration.

To the best of the authors’ knowledge, there is no documented study on the qualitative analysis of bioactive compounds in A.B using Raman and FTIR. Therefore, the study fulfils the identified need to ascertain alternative procedures for the analysis of bioactive compounds.

The purpose of this study is to extract and characterize a novel natural dye from the leaves of Lannea coromandelica and the extraction with finding ways of dyeing cotton fabric using three mordants.

The colouring agents were extracted from the leaves of Lannea coromandelica using an aqueous extraction method. The extract was characterized using analysis methods of pH, gas chromatography-mass spectrometry (GC-MS), Fourier transform infrared (FTIR), ultraviolet-visible (UV-vis) and cyclic voltammetry measurement. The extract was applied to cotton fabric samples using a non-mordant and three mordants under the two mordanting methods. The dyeing performance of the extracted colouring agent was evaluated using colour fastness properties, colour strength (K/S) and colour space (CIE Lab).

The aqueous dye extract showed reddish-brown colour, and its pH was 5.94. The GC-MS analysis revealed that the dye extract from the leaves of Lannea coromandelica contained active chemical compounds. The UV-vis and FTIR analyses found that groups influenced the reddish-brown colour of the dye extraction. The cyclic voltammetry measurements discovered the electrochemical properties of the dye extraction. The mordanted fabric samples showed better colour fastness properties than the non-mordanted fabric sample. The K/S and CIE Lab results indicate that the cotton fabric samples dyed with mordants showed more significant dye affinities than non-mordanted fabric samples.

Researchers have never discovered that the Lannea coromandelica leaf extract is a natural dye for cotton fabric dyeing. The findings of this study showed that natural dyes extracted from Lannea coromandelica leaf could be an efficient colouring agent for use in cotton fabric.

The purpose of this study is to explore how consumers apply clean-eating criteria to a range of food characteristics, and the extent to which individuals are consistent in how they apply clean-eating criteria across products. Further, this study investigates how the clean-eating approach relates to underlying food choice motives.

Data were collected in a consumer survey (n = 666) in Sweden, where participants were prompted about the importance of a set of intrinsic food attributes of the “free-from” and “added” types, for three different food product types (bread, processed meat, ready meals). Data were analyzed using latent class cluster analysis, to explore segments of consumers that place similar importance to the food characteristics and hold similar food choice motives.

Clean eating can be described by two distinctly different attainment strategies: avoiding undesirable characteristics or by simultaneously approaching desirable characteristics. Notably, individuals who apply clean-eating criteria in their food choices strive for healthy, natural and environmentally friendly food, but the clean-by-approach strategy implies a stronger focus on personal health in the form of weight control.

While claims and labels on food packages concerning clean eating are implemented by food manufacturers, it remains unregulated. This study provides information for future regulations on how consumers apply clean-eating criteria, and their motives thereof. Further, the results provide insights food manufacturers regarding motives for clean eating in different consumer segments.

Everyone is extremely concerned about environmental protection and health safety due to the rise in living standards. Plant-derived natural dyes have garnered much industrial attention in food, pharmaceutical, textile, cosmetics, etc. owing to their health and environmental benefits. The present study aims to focus on the elimination of the use of synthetic dyes and provides brief information about natural dyes, their sources, extraction procedures with characterization and various advantages and disadvantages.

In producing natural colors, extraction and purification are essential steps. Various conventional methods used till date have a low yield, as these consume a lot of solvent volume, time, labor and energy or may destroy the coloring behavior of the actual molecules. The establishment of proper characterization and certification protocols for natural dyes would improve the yielding of natural dyes and benefit both producers and users.

However, scientists have found modern extraction methods to obtain maximum color yield. They are also modifying the fabric surface to appraise its uptake behavior of color. Various extraction techniques such as solvent, aqueous, enzymatic and fermentation and extraction with microwave or ultrasonic energy, supercritical fluid extraction and alkaline or acid extraction are currently available for these natural dyes and are summarized in the present review article.

If natural dye availability can be increased by the different extraction measures and the cost of purified dyes can be brought down with a proper certification mechanism, there is a wide scope for the adoption of these dyes by small-scale dyeing units.

Packaging and labelling have become essential to how food manufacturers generate and deliver value to customers. The information displayed on the packaging can be used to communicate to customers the properties and unique characteristics of a food product (e.g. nutrients, calories and country of origin). To achieve communication goals effectively, manufacturers need to understand how consumers evaluate products based on their attributes. In particular, companies should be aware of which specific product attributes affect consumer buying behaviour and which product attributes are more critical during food assessment. So, the paper aims to investigate consumer's behaviuor linked to typical product attributes indicated on the packaging.

The present study examines consumer willingness to pay (WTP) for a cherry jam with different attributes (brand, type of production method and price) on a sample of 2,166 Italian respondents through a choice experiment using a random parameter logit-error component model.

The results showed that WTP for jams can be affected by attributes such as brand, price and production methods; precisely, they indicated that the level of naturalness in the production process constitutes the main element for the consumer’s choice; however, the considerable weight that price and brand have in influencing the purchasing behaviour of the food consumer was still confirmed: in fact, a p-value of less than 0.05 was found in all cases.

To the best of the authors’ knowledge, this is the first study that assesses the effect of different types of production on WTP for food products. In addition, this study also reflects on the importance of the level of education for consumer choice.