Search results
1 – 10 of over 4000Saroj Kumar Giri, Shukadev Mangaraj, Lalan Kumar Sinha and Manoj Kumar Tripathi
Soy beverage is becoming more and more popular because it is touted as a healthy food containing useful phytochemicals and is free from lactose and cholesterol. The purpose of…
Abstract
Purpose
Soy beverage is becoming more and more popular because it is touted as a healthy food containing useful phytochemicals and is free from lactose and cholesterol. The purpose of this paper is to optimize the spray drying process parameters for obtaining soy beverage powder with good reconstitution and handling properties.
Design/methodology/approach
Pre-concentrated soy beverage was dried in a laboratory model spray dryer, and the effects of inlet air temperature (180-220°C), feed rate (20-40 ml/min) and feed solid content (15-25 per cent) on some physical parameters and reconstitution properties (wettability and dispersibility) of spray-dried soy beverage powders were investigated. Second order polynomial response surface model was selected for the analysis of data and optimization of the process.
Findings
Spray drying of soy beverage at different processing conditions resulted in powders with particle size (volume mean diameter) in the range of 86 to 156 µm. Dispersibility and wetting time of the spray-dried soy beverage powders was found to be in the range of 56 to 78 per cent and 30 to 90 s respectively, under various drying conditions. Inlet air temperature was found to be the main factor affecting most of the quality parameters, followed by solid content of the feed. Temperature significantly affected the wettability, dispersibility, colour parameters, particle size and flowability of the powder at p ≤ 0.01. Lower temperature and higher feed solid content produced bigger-sized powder particles with better handling properties in terms of flowability and cohesiveness. A moderate inlet air temperature (196°C), higher feed solid content (24 per cent) and lower feed rate (27 ml/min) were found suitable for drying of soy beverage.
Practical implications
The study implied the possibility of producing powder from soy beverage using the spray-drying method and optimized drying conditions for obtaining soy beverage powder with good reconstitution properties.
Originality/value
The finding of this study demonstrated for the first time how the inlet air temperature, feed solid content and feed rate during spray-drying influenced different quality parameters of soy beverage powder. Further, an optimized drying condition has been identified.
Details
Keywords
Elizabeth Oluwaseun Sunny‐Roberts and Dietrich Knorr
This paper aims to evaluate the cellular injuries associated with spray‐drying of Lactobacillus rhamnosus GG (LGG) in trehalose/monosodium glutamate (MSG) media by means of flow…
Abstract
Purpose
This paper aims to evaluate the cellular injuries associated with spray‐drying of Lactobacillus rhamnosus GG (LGG) in trehalose/monosodium glutamate (MSG) media by means of flow cytometry measurements; and also whether, and to what extent, the probiotic remain stable and viable in food formulations.
Design/methodology/approach
Spray‐drying was applied in the production of trehalose‐based preparations containing LGG. To gain more insights on the cellular damages that must have occurred during drying, flow cytometric analysis was applied in combination with carboxyfluorescein diacetate (cFDA) and PI stains. Spray‐dried samples were observed by scanning electron microscopy (SEM). The storage stability of spray‐dried LGG was monitored in food samples over a period of time.
Findings
It was observed that during spray‐drying, 1.80×109 CFU/ml viable counts, which were equivalent of 68.8 per cent cells, were recovered in trehalose matrices but on incorporating 12.5 g/l MSG as a carrier component, survival rates were significantly improved. Density plot analysis showed a higher degree of membrane damage in cells spray‐dried in trehalose without MSG. SEM revealed no difference in the shapes and surfaces of spray‐dried samples. Evaluation of the recovery rates of LGG, initial count of ∼109 CFU/ml or g, at storage time intervals revealed a minimum level of ∼105 CFU/ml in apple juice after 12 days and ∼107 CFU/g in chocolate beverages after ten weeks.
Originality/value
The potential contribution of MSG as a carrier component with trehalose in preventing higher losses during spray‐drying and food storage is pointed out in this study.
Details
Keywords
In this special feature details are given of those British paints which can be described as corrosion‐resistant primers, both one‐ and two‐pack. The materials are generally…
Abstract
In this special feature details are given of those British paints which can be described as corrosion‐resistant primers, both one‐ and two‐pack. The materials are generally classified according to the base or pigment which actively prevents corrosion—e.g. metallic zinc in zinc/epoxy formulations— or by the base which produces a barrier action against corrosion, e.g. bitumen in bituminous paints. Exceptions to this are the etching primers, which are separately classified. About 300 primers are described, the manufacturers' names and addresses being cross‐indexed and listed separately on page 48.
Quoc-Duy Nguyen, Thi-Dung Vu, Thuy-Trang Nguyen, Thi-Kieu-Vi Phan, Hieu-Thao Pham and Phuong-Thao Nguyen
This study aims to investigate the effect of spray drying temperature and maltodextrin addition on the contents of phenolics, flavonoids, anthocyanins and antioxidant activities…
Abstract
Purpose
This study aims to investigate the effect of spray drying temperature and maltodextrin addition on the contents of phenolics, flavonoids, anthocyanins and antioxidant activities (2,2-diphenyl-1-picrylhydrazyl [DPPH] radical scavenging activity, ferric reducing antioxidant power and reducing power) of karonda powder.
Design/methodology/approach
Over the past few decades, the demands for application of natural colorants in food production have been attracting the attention of academic research and food industry. Anthocyanins, a red pigment commonly found on plants, show high potentials in the preparation of spray-dried pigment powder. This study, therefore, was conducted using full factorial design with two factors, namely, inlet temperature (150°C and 160°C) and soluble solid concentration (10, 15 and 20°Brix) with maltodextrin as carrier to produce pigment powder from karonda, an anthocyanin-rich fruit which is native to southeast Asia.
Findings
Increasing soluble solid content from 10 to 15°Brix resulted in a 42%–57% reduction in phenolic, flavonoid and anthocyanin contents. However, when increasing the amount of maltodextrin from 15 to 20°Brix, a lower reduction (approximately 11%–19%) was observed. In samples with the same °Brix, there was no significant variation in antioxidant contents and activities, especially at high maltodextrin ratios. In addition, the reducing power of samples dried at higher temperature (160°C) was higher than that of samples dried at lower temperature. Karonda spray-dried powder showed a good positive correlation (p < 0.01) between antioxidant contents and DPPH• activity.
Originality/value
To the best of the authors’ knowledge, in this study, for the first time, the effect of spray drying conditions on the quality of karonda powder was investigated.
Details
Keywords
Sonika Pandey, Amrita Poonia and Suman Rai
To overcome the need of seasonal fruit ber, consumers prefer to use fruits in such a form that can be prepared easily or consumed instantly. By transforming them into powders…
Abstract
Purpose
To overcome the need of seasonal fruit ber, consumers prefer to use fruits in such a form that can be prepared easily or consumed instantly. By transforming them into powders, they can be effortlessly attained as well as preserved, stored and processed.
Design/methodology/approach
To optimize the spray drying conditions for development of ber fruit powder, response surface methodology was used. The experimental design consisted of 13 runs. The levels of independent variables, i.e. inlet air temperature, varied from 153.79ºC to 196.21ºC and maltodextrin concentration, from 4.17 to 9.83 per cent. The responses were moisture content, bulk density, solubility, vitamin C, ΔE and L value.
Findings
The second-order polynomial model fitted for moisture content, bulk density, solubility, vitamin C, ΔE and L value was highly significant (p < 0.001) for each response. The inlet air temperature showed maximum influence on moisture content, bulk density, solubility and vitamin C, whereas the maltodextrin concentration showed maximum influence on bulk density, solubility, ΔE and L value. The predicted values were attained as moisture 4.90 per cent, bulk density 0.35g/ml, solubility 89.11 per cent, vitamin C 91.06mg/100g, ΔE 31.03 and L 87.78. The recommended optimum spray drying conditions were inlet air temperature and maltodextrin concentration of 166.64°C and 9.26 per cent, respectively.
Originality/value
Spray drying of the underused Indian fruit ber has enhanced its utility. Ber powder can further be used as an instant beverage, in sweets, as a flavoring agent and in soft drinks.
Details
Keywords
Katharina Ardanareswari, Tyas Utami and Endang Sutriswati Rahayu
The purpose of this paper is to study the effect of heat adaptation, pH adjustment, and the combination pretreatments to the resistance of Lactobacillus paracasei SNP2 in heat…
Abstract
Purpose
The purpose of this paper is to study the effect of heat adaptation, pH adjustment, and the combination pretreatments to the resistance of Lactobacillus paracasei SNP2 in heat shock and spray drying.
Design/methodology/approach
Sub-lethal and lethal temperature range of L. paracasei SNP2 was determined by enumeration of cell survival after incubation at 37-55°C for 30 min. A certain temperature from sub-lethal range was selected for heat adaptation. Heat adaptation (H), pH adjustment (pH), and combination of pretreatments (pH-H) were applied prior to heat shock and spray drying.
Findings
The selected condition for heat adaptation and heat shock is 44°C, 30 min and 55°C, 15 min, respectively, based on the sub-lethal and lethal temperature range. By heat shock, cells in the whey-sucrose medium showed cell death of 2.05 log cycles, lower than cell death in the MRS medium of 4.84 log cycles. The pretreatments showed slight increase of heat resistance in cell grown in whey sucrose. The effect of H, pH, and pH-H pretreatments highly increase heat resistance of cell grown in MRS indicated by cell death of 4.27, 3.79, and 2.43 log cycles, respectively, which is much lower than control. The pretreatments showed no significant effect to L. paracasei SNP2 survival to spray drying.
Originality/value
This is the first study of L. paracasei SNP2 resistance to heat shock and spray drying. This paper also enriches information about application of whey sucrose as a growth medium and a heating medium.
Details
Keywords
Twinkle Borah, Nooreen Washmin, Nayan Jyoti Bora, Jadumoni Saikia, Padma Sangmu Bomzon, Tobiul Hussain Ahmed, Prasenjit Manna, Siddhartha Proteem Saikia and Dipanwita Banik
The study was aimed to compare the effect of three drying techniques viz., spray, freeze and hot air oven (HAO) drying on yield, nutritional parameters, minerals and…
Abstract
Purpose
The study was aimed to compare the effect of three drying techniques viz., spray, freeze and hot air oven (HAO) drying on yield, nutritional parameters, minerals and physicochemical and morphological characterization of wild banana pulp (Musa balbisiana Colla).
Design/methodology/approach
Contents of carbohydrate was estimated by Anthrone reagent, protein by Kjeldahl, fat by Soxhlet, dietary fiber and ash by Association of Official Analytical Chemists (AOAC), minerals by Atomic Absorption Spectrophotometry, gross calorific value by Bomb calorimeter, moisture by moisture analyzer, water activity by water activity meter, morphological characterization by Scanning Electron Microscopy (SEM), statistical level of significance at p < 0.05 by ANOVA, predictive modeling by simple and multiple linear regression.
Findings
Freeze and HAO drying were standardized with matured (stage 2) and spray drying with ripe bananas (stage 6). Freeze drying showed highest yield (76.69 ± 0.15%), minerals viz., K (1175.67 ± 1.41), Fe (2.27 ± 0.09), Mg (120.33 ± 0.47), Mn (4.40 ± 0.28) mg/100 g, protein (7.53 ± 0.14%), lesser moisture (7.95 ± 0.01%), water activity (0.17 ± 0.02aw), hygroscopicity (6.37 ± 1.09%), well dispersed particles by SEM. HAO drying exhibited highest dietary fiber (18.95 ± 0.24%), gross calorific value 357.17 kcal/100 gm, higher solubility (47.22 ± 0.86%). Spray drying showed highest carbohydrate (85.29 ± 0.01%), lowest yield (28.26 ± 0.32%), required 30.5% adjuncts.
Research limitations/implications
Effect of three drying techniques and use of adjuncts were not uniform for ripe and matured bananas.
Practical implications
Commercial utilization of seeded wild banana.
Social implications
Value addition of wild banana in Assam, India
Originality/value
Freeze drying of mature wild banana pulp (M. balbisiana) was found as best technique utilizing lesser energy.
Details
Keywords
Gousia Gani, Haroon Naik, Tawheed Amin, Nusrat Jan, Syed Zameer Hussain, Omar Bashir and Abida Jabeen
Currently, there is a great demand for those food products that are easy to prepare or ready for direct consumption. Making pear fruit/juice available round the year is desirous…
Abstract
Purpose
Currently, there is a great demand for those food products that are easy to prepare or ready for direct consumption. Making pear fruit/juice available round the year is desirous owing to pears' high-nutritional value and specific pleasant taste. Pear is, however, a seasonal fruit and under ambient conditions has a limited shelf life rendering it available as fresh fruit for a specific period.
Design/methodology/approach
The study aimed to optimize the spray drying process parameters using response surface methodology for the development of pear juice powder. The process variables included the inlet air temperature of 140–210°C, maltodextrin levels of 4–25%, atomization speed of 11,400–28,000 rpm, feed flow rate of 180–630 mL/hr, and feed total soluble solids (TSS) of 13–30°Brix. The dependent responses were powder yield, solubility, antioxidant activity {% 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging capacity}, dispersibility, hygroscopicity and particle density.
Findings
Among independent variables, inlet air temperature showed a predominant effect. The optimum processing conditions for the development of pear juice powder with optimum quality were 163.02°C inlet air temperature, 13.50% maltodextrin, 28,000 rpm atomization speed, 390.94 mL/h feed flow rate, and 25.5°Brix feed TSS. Under these optimum conditions, pear powder with desirable properties could be produced. The experimental and predicted values were found to be in agreement, indicating the suitability of the model in predicting optimizing responses of pear powder. Glass transition temperature of pear powder was found to be 36.60 ± 0.40°C, which is much higher than that of ambient temperature, suggesting better shelf stability.
Originality/value
The processing of pear fruit has resulted in the increased demand for pear juice powder in both domestic and international markets as a primer of new food products. The optimum conditions obtained in the current study could provide a new insight to the food industry in developing spray-dried pear powder of optimum quality. This can open up a new horizon in the field of food industry for the common masses of Jammu and Kashmir, India.
Details
Keywords
Describes methods of accelerated corrosion testing currently being used in the world today and the cabinets available in which to perform the tests. Compares the tests and looks…
Abstract
Describes methods of accelerated corrosion testing currently being used in the world today and the cabinets available in which to perform the tests. Compares the tests and looks at the results obtained from them, looking at constant salt‐spray testing ASTM B117, cyclic wet/dry Prohesion and the multi‐function automotive cyclic corrosion test which incorporates salt‐spray cycles and high humidity cycles. Gives test results comparing constant salt‐spray to cyclic Prohesion to natural outdoor exposure.
Meng Fanjing, Minghua Pang and Lijie Ma
Carbon steel has a high application rate in modern industry, but this type of steel has the defect of high wear. This study aims to improve the surface friction and wear…
Abstract
Purpose
Carbon steel has a high application rate in modern industry, but this type of steel has the defect of high wear. This study aims to improve the surface friction and wear performance of carbon steel under such working conditions.
Design/methodology/approach
In this study, a dry film lubricant based on graphite powder was prepared by the ultrasonic dispersion method, and deposited on the surface of carbon steel specimens by the simple pressure spraying technology. At the same time, molybdenum disulfide and polytetrafluoroethylene dry film lubricants were developed by the same method, and the comparative experimental study on friction and wear was carried out in the end-face friction tester.
Findings
The results show that the deposition effect of graphite and molybdenum disulfide dry film lubricants on the surface of carbon steel is obviously better than that of polytetrafluoroethylene dry film lubricant. Compared with molybdenum disulfide and polytetrafluoroethylene dry film lubricant, graphite dry film lubricant has the best friction and wear performance on the surface of carbon steel. The working life of carbon steel specimens sprayed with graphite dry film lubricant decreases with the increase of pressure load and rotation speed. The combination of load and sliding speed will accelerate the transition of the coating to a stable direction. In addition, the micro lubricant particles formed in the wear process will form particle flow lubrication, and the appropriate addition of particle powder of the same material will also prolong the normal antifriction time of the lubricant.
Originality/value
These findings developed a dry film lubricant that can effectively improve the friction and wear properties of carbon steel surface.
Details