Search results

The purpose of this study is to optimize multilayer vacuum thermal insulation (MLI) of modern high-weight spacecrafts. An adequate mathematical simulation of heat transfer in the MLI is impossible if there is no available information on the main insulation properties.

The results of experiments in thermo-vacuum facilities are used to re-estimate some radiative properties of metallic foil/metalized polymer foil and spacer on the basis of the inverse problem solution. The experiments were carried out for the sample of real MLI used for the BP-Colombo satellite (ESA). The recently developed theoretical model based on neglecting possible near-field effects in radiative heat transfer between closely spaced aluminum foils was used in theoretical predictions of heat transfer through the MLI.

A comparison of the computational results and the experimental data confirms that there are no significant near-field effects between the neighboring MLI layers. It means that there is no considerable contradiction between the far-field model of radiative transfer in MLI and the experimental estimates.

An identification procedure for mathematical model of the multilayer thermal insulation showed that a modified theoretical model developed recently can be used to estimate thermal properties of the insulation at conditions of space vacuum.

Examines the fourteenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

Examines the thirteenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

Sweating is thermo-regulatory behaviour that occurs when a person performs vigorous activity even in cold climatic condition. One of important component of sweat is the presence of lactate. Based on climatic condition, age, gender, maturity and nature of activity level, the change in lactate concentration is inevitable. Hence, the present study is focussed on the impact of change in the lactate concentration on the moisture transmission behaviour through the clothing. The purpose of this paper is to investigate the impact of changing lactate concentration on the moisture vapour transmission behaviour through multi-layered clothing ensembles.

For the investigation, sweat solution representing male and female sweat were taken for present study. Two different multi-layered ensembles consisting of either spacer or fleece as middle layer were considered. The water vapour permeability and drying rate test were done at standard atmospheric conditions. After testing, ANOVA analysis was done in order to determine the most significant parameters.

Fabric structure (constituent layers) behaved differently when tested individually and as the layered component with different sweat solutions. Water vapour permeability of sweat solution with higher lactate concentration was lower as compared to sweat solution with lower lactate concentration. Individual layers showed higher rate of vapour permeability with sweat solution containing lower lactate concentration as compared to multi-layered ensembles. Role of PU coated nylon fabric was predominant in case of multi-layered ensembles. Difference in transmission of sweat solution was found higher in case of uni-directional stitched multi-layer spacer ensembles whereas marginal difference was observed in case of bi-directional seamed multi-layer spacer ensemble. Drying rate of sweat containing lower concentration of lactate was higher as compared to the other sweat solution for all the selected fabrics. Density of liquid and amount of the water available for drying influenced the drying behaviour and thus accounted for difference in drying rate of sweat solution differing in the lactate concentration. The contribution percentage of layers, i.e. type of structure was higher (nearly 93–96%) compared to that of solution type (3.3–4.9%) in case of individual layers whereas in the case of the multi-layer ensembles; type of seam had maximum contribution percentage (71–77%) followed by solution type (10–15%). Type of layers had least contribution percentage (nearly 7–9%).

The findings from the study are expected to be realistic and important in designing and development of cold weather garment ensemble for different gender type depending on their activity level especially in case of military personnel and those performing combat activities.

This experimental work based will provide the insight about the behaviour of actual sweat transmission through the layered fabric ensembles and ways to prevent the accumulation of moisture near to human skin surface by manufacturing suitable design structures (in terms of layering composition and seam patterns) per the morphology and requirement of specific consumers.

The aim of the research is to achieve a robot skin which is easy to use, and can detect both position and force interacted between robot and environments.

The new type of robot skin proposed in this paper includes two functional modules – contact position sensor and contact force sensor. The contact position sensor module is based on the resistor divider principle, which consists of two perpendicular conductive fiber layers and insulated dot spacer between them. The contact force sensor module is based on capacitance change theory, which consists of two soft conductive plates and a viscoelastic layer between them. By combining the two modules, the soft robot skin was designed.

Simulation and experiment results demonstrate that the proposed robot skin design is feasible and effective enough to sense contact position and contact force simultaneously.

This robot skin is low-cost and easy to make and use, which provides safety solutions for most of the robot.

For the first time, an integrated robot skin which can get contact position and force information simultaneously is designed. Unlike general tactile sensor matrices, this robot skin has only six leads. Furthermore, the number of leads does not increase with the enlarging of sensor area. Soft and simple structure of the robot skin makes it possible to cover any region of the robot body.

Examines the twelfth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

Examines the fifthteenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

The purpose of this paper is to investigate the use of medical‐grade polymethylmethacrylate (PMMA) in fused deposition modeling (FDM) to fabricate porous customized freeform structures for several applications including craniofacial reconstruction and orthopaedic spacers. It also aims to examine the effects of different fabrication conditions on porosity and mechanical properties of PMMA samples.

The building parameters and procedures to properly and consistently extrude PMMA filament in FDM for building 3D structures were determined. Two experiments were performed that examined the effects of different fabrication conditions, including tip wipe frequency, layer orientation, and air gap (AG) (or distance between filament edges) on the mechanical properties and porosity of the fabricated structures. The samples were characterized through optical micrographs, and measurements of weight and dimensions of the samples were used to calculate porosity. The yield strength, strain, and modulus of elasticity of the samples were determined through compressive testing.

Results show that both the tip wipe frequency (one wipe every layer or one wipe every ten layers) and layer orientation (transverse or axial with respect to the applied compressive load) used to fabricate the scaffolds have effects on the mechanical properties and resulting porosity. The samples fabricate in the transverse orientation with the high tip wipe frequency have a larger compressive strength and modulus than the lower tip wipe frequency samples (compressive strength: 16±0.97 vs 13±0.71 MPa, modulus: 370±14 vs 313±29 MPa, for the high vs low tip wipe frequency, respectively). Also, the samples fabricated in the transverse orientation have a larger compressive strength and modulus than the ones fabricated in the axial orientation (compressive strength: 16±0.97 vs 13±0.83 MPa, modulus: 370±14 vs 281±22 MPa; for samples fabricated with one tip wipe per layer in the transverse and axial orientations, respectively). In general, the stiffness and yield strength decreased when the porosity increased (compressive strength: 12±0.71 to 7±0.95 MPa, Modulus: 248±10 to 165±16 MPa, for samples with a porosity ranging from 55 to 70 percent). As a demonstration, FDM is successfully used to fabricate patient‐specific, 3D PMMA implants with varying densities, including cranial defect repair and femur models.

This paper demonstrates that customized, 3D, biocompatible PMMA structures with varying porosities can be designed and directly fabricated using FDM. By enabling the use of PMMA in FDM, medical implants such as custom craniofacial implants can be directly fabricated from medical imaging data improving the current state of PMMA use in medicine.

Perspiration and heat are produced by the body and must be eliminated to maintain a stable body temperature. Sweat, heat and air must pass through the fabric to be comfortable. The cloth absorbs sweat and then releases it, allowing the body to chill down. By capillary action, moisture is driven away from fabric pores or sucked out of yarns. Convectional air movement improves sweat drainage, which may aid in body temperature reduction. Clothing reduces the skin's ability to transport heat and moisture to the outside. Excessive moisture makes clothing stick to the skin, whereas excessive heat induces heat stress, making the user uncomfortable. Wet heat loss is significantly more difficult to understand than dry heat loss. The purpose of this study is to provided a good compilation of complete information on wet thermal comfort of textile and technological elements to be consider while constructing protective apparel.

This paper aims to critically review studies on the thermal comfort of textiles in wet conditions and assess the results to guide future research.

Several recent studies focused on wet textiles' impact on comfort. Moisture reduces the fabric's thermal insulation value while also altering its moisture characteristics. Moisture and heat conductivity were linked. Sweat and other factors impact fabric comfort. So, while evaluating a fabric's comfort, consider both external and inside moisture.

The systematic literature review in this research focuses on wet thermal comfort and technological elements to consider while constructing protective apparel.

One of the recent applications of fabrics is to use them for sound insulation. Accordingly, due to their low production cost and low relative density, fabrics have drawn attention in some of the industries such as the automotive and aircraft industries. The present study is aimed to investigate the effects of the fiber cross-section, porosity, thickness of samples and fuzzing of the knitted fabric on the sound absorption coefficient.

In the present study, fabrics with three different stitch densities were knitted by yarns consist of three different forms of fiber cross-section shapes (circular, elliptical and plus-shaped). In this work, the sound absorption coefficient of knitted fabrics was investigated with regard to the different fiber cross-sections and structural parameters using an impedance tube.

As indicated by the obtained results, the cross-section, porosity, thickness and mass per unit area of the fabrics were the determinant factors for the sound absorption coefficient. In addition to, the sound absorption coefficient and porosity were shown to have an inverse relationship.

A section of the present paper has been allocated to the investigation of the effect of the fiber cross-section and fuzzing of fabric on the sound absorption of plain knitted fabrics.