Search results

The purpose of this study is to analyse the characteristics of cellulose fibres derived from the pseudo-stems of Curcuma longa and to evaluate the properties of non-woven fabric produced using these fibres.

The fibres were extracted via a decortication method. The acquired intrinsic qualities of the fibres were used to assess the feasibility of using them in textile applications. The thermal bonding approach was used for the development of the non-woven fabric, using a hot press machine with low-melt polyester fibre as a binder.

The mean length of Curcuma longa fibres was determined to be 52.73 cm, with a fineness value of 4.00 tex. The fibres exhibited an uneven cross-sectional morphology, characterized by a diverse range of oval-shaped lumens. The fibre exhibited a tenacity of 1.45 g/denier and an elongation value of 4.30%. The fibres possessed a moisture regain value of 11.30%. The experimental non-woven fabrics had consistent weight and thickness, while exhibiting different properties in terms of tensile strength and air permeability, with Fabric C having the highest tensile strength and the lowest air permeability value.

The features of Curcuma longa fibre, obtained with the decortication process, exhibited suitability for textile applications. Three experimental non-woven fabrics comprising different compositions of Curcuma longa fibre and low-melt polyester fibre were produced. The tensile strength and air permeability properties of these fabrics were influenced by the composition of the fibres.

Gourd fibres (GF) are a natural biodegradable fibre material with excellent mechanical properties and high tensile strength. The use of natural fibres in composite materials has gained popularity in recent years due to their various advantages, including renewability, low cost, low density and biodegradability. Gourd fibre is one such natural fibre that has been identified as a potential reinforcement material for composites. However, it has low surface energy and hydrophobic nature, which makes it difficult to bond with matrix materials such as polyester. To overcome this problem, chemically adapted gourd fibre has been proposed as a solution. Chemical treatment is one of the most widely used methods to improve the properties of natural fibres. This research evaluates the feasibility and effectiveness of incorporating chemically adapted gourd fibre into polyester composites for industrial fabrication. The purpose of this study is to examine the application of chemically modified GF in the production of polyester composite engineering materials.

This work aims to evaluate the effectiveness of chemically adapted gourd fibre in improving the adhesion of gourd fibre with polyester resin in composite fabrication by varying the GF from 5 to 20 wt.%. The study involves the preparation of chemically treated gourd fibre through surface modification using sodium hydroxide (NaOH), permanganate (KMnO₄) and acetic acid (CH₃COOH) coupling agents. The mechanical properties of the modified fibre and composites were investigated. It was then characterized using scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) to determine the changes in surface morphology and functional groups.

FTIR characterization showed that NaOH treatment caused cellulose depolymerization and caused a significant increase in the hydroxyl and carboxyl groups, showing improved surface functional groups; KMnO₄ treatment oxidized the fibre surface and caused the formation of surface oxide groups; and acetic acid treatment induced changes that primarily affected the ester and hydroxyl groups. SEM study showed that NaOH treatment changed the surface morphology of the gourd fibre, introduced voids and reduced hydrophilic tendencies. The tensile strength of the modified gourd fibres increased progressively as the concentration of the modification chemicals increased compared to the untreated fibres.

This work presents the designed composite with density, mechanical properties and microstructure, showing remarkable improvements in the engineering properties. An 181.5% improvement in tensile strength and a 56.63% increase in flexural strength were got over that of the unreinforced polyester. The findings from this work will contribute to the understanding of the potential of chemically adapted gourd fibre as a reinforcement material for composites and provide insights into the development of sustainable composite materials.

This study/paper aims to develop fundamental understanding of mechanical properties for multiple fibre-reinforced materials by using a single-filament-wide tensile-testing approach.

In this study, recently validated single-filament-wide tensile-testing specimens were used for four polymers with and without short-fibre reinforcement. Critically, this specimen construct facilitates filament orientation control, for representative longitudinal and transverse composite directions, and enables measurement of interlayer bonded area, which is impossible with “slicing” software but essential in effective property measurement. Tensile properties were studied along the direction of extruded filaments (F) and normal to the interlayer bond (Z) both experimentally and theoretically via the Kelly–Tyson model, bridging model and Halpin–Tsai model.

Even though the four matrix-material properties varied hugely (1,440% difference in ductility), consistent material-independent trends were identified when adding fibres: ductility reduced in both F- and Z-directions; stiffness and strength increased in F but decreased or remained similar in Z; Z:F strength anisotropy and stiffness anisotropy ratios increased. Z:F strain-at-break anisotropy ratio decreased; stiffness and strain-at-break anisotropy were most affected by changes to F properties, whereas strength anisotropy was most affected by changes to Z properties.

To the best of the authors’ knowledge, this is the first study to assess interlayer bond strength of composite materials based on measured interlayer bond areas, and consistent fibre-induced properties and anisotropy were found. The results demonstrate the critical influence of mesostructure and microstructure for three-dimensional printed composites. The authors encourage future studies to use specimens with a similar level of control to eliminate structural defects (inter-filament voids and non-uniform filament orientation).

Tribology of the carbon‐fibre‐reinforced plastics has been investigated. The wear‐resistance of carbon‐fibre‐reinforced plastics was found to be much better than those of other plastics reinforced with fibres of glass and stainless steel and was affected by the fibre‐orientation relative to sliding. Law of mixture in the frictional coefficient of composite materials was deduced; a comparison of calculated values with experimental data showed good agreements. Wear‐resistance of the carbon‐fibre‐reinforced plastics against fretting was also examined; good wear‐resistance was obtained when sliding within a region about 30° from the carbon‐fibre axis.

Soft robotics is a burgeoning field owing to its high adaptability and safety in human–machine interaction and unstructured environments. However, the feedback control of soft actuators with flexible sensors is still a challenge.

To address this issue, this study proposes an optical fibre-based sensing membrane for the posture measurement of soft pneumatic bending actuators. The major contribution is the development of a flexible sensing membrane with a high sensitivity and repeatability for the feedback control of soft actuators. The characteristics of sensing membrane were analysed. The relationship between wavelength shift and bending curvature was derived. The curvatures of soft actuator were measured at four bending status, and the postures were reconstructed.

The results indicate that the measurement error is less than 2.1% of the actual bending curvature. The sensitivity is up to 212.8 pm/m⁻¹, and the signal fluctuation in repeated measurements is negligible. This approach has broad application prospects in soft robotics, because it makes the optical fibre achieve more strength and compatible with soft actuators, thus improving the sensing accuracy, sensitivity and reliability of fibre sensors.

Different from previous approaches, an optical fibre with FBGs is embedded into a multilayered polyimide film to form a flexible sensing membrane, and the membrane is embedded into a soft pneumatic bending actuator as the smart strain limited layer which is able to measure the posture in real time. This approach makes the optical fibre stronger and compatible with the soft pneumatic bending actuator, and the sensing accuracy, sensitivity and reliability are improved. The proposed sensing configuration is effective for the feedback control of the soft pneumatic bending actuators.

As a way of enhancing the mechanical properties of photopolymer‐based parts produced by layered manufacturing (LM) techniques, the use of short glass‐fibre reinforcements has been recently explored in the literature. This paper proposes a novel methodology that utilizes a modified rule‐of‐mixtures model for the prediction of the mechanical properties of such layered composites. The prediction process employs empirical data on (i) the fibre‐matrix interface, (ii) the fibres’ geometrical arrangement within the specimens (i.e. fibre‐orientation distribution), and (iii) the fibre‐length distribution. The effects of the fibre‐orientation and fibre‐length distributions are accounted for in the prediction model by the fibre‐length‐correction and orientation‐efficiency factors. Comparison of extensive experimental results and model‐based predictions of mechanical properties of layered composites demonstrated the effectiveness of the proposed estimation methodology.

In recent times, wool- and silk-blended fabrics are popular for creating glamourous products. Silk is blended to wool for creating more lustrous effect and to impart strength; on the other hand, wool is responsible for resilience, softness and warmth properties. Chemically both the fibres are protein-based, but the amount of amino acids is different. Due to this, the dye absorption behaviours of the two fibres from the same dye-bath are different. Wool is become darker than the silk fibre, if both the fibres are dyed together in a single bath dyeing process.

Here the wool fibres are first pre-treated with a commercial synthetic tanning agent (syntan) Mesitol HWS at three different pH values of 2.2, 3.2 and 4.2 and at three different concentrations: 5, 10 and 15 per cent. Then the syntan pre-treated wool fibres are dyed together with silk fibres maintaining the blend ratio as 80:20 by Telon Red MR, Telon Yellow M4GL and Telon Blue MRLW with sodium sulphate at three different concentrations of 10, 20 and 30 per cent.

The dye absorbency of the syntan-treated wool fibres decreased with increase in syntan concentration, whereas the colour strength of silk fibres increased. The resist effectiveness of wool fibres is increased from 6 to 59 per cent with increase of syntan concentration. So after the dyeing process, the colour strength of syntan-treated wool fibres are almost same with the colour strength of silk fibres. The washing fastness of the samples is improved, and wash fastness behaviour of both wool and silk fibres is almost same.

This paper gives an idea about the one bath dyeing process of wool- and silk-blended fabrics to achieve solid dyeing effect.

The purpose of this paper is to provide a detailed review of radiation dosimetry techniques based on optical fibre dosimeters. It presents a comprehensive bibliography of the current research activities in the area.

A range of published work on optical fibre radiation dosimeters are presented, with the merits and limitations discussed. Each radiation dosimetry technique is discussed in turn, providing examples of dosimeters using such techniques reviewed. The main focus is on gamma radiation although other radiation dosimeters are considered.

This paper provides information on the wide range of research activity into radiation dosimeters. The dose ranges of these dosimeters are presented, along with the advantages and disadvantages of different dosimetry techniques.

A comprehensive review of published research in the area of solid radiation dosimetry is presented in this paper. It provides an individual with a review of the various techniques used and most recent research in that field.

Examines the fifthteenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

The aim of this paper to explain the difficulties associated with applying the science of nutrition in formulating advice to protect public health, using the example of dietary fibre.

Based on this review of relevant literature published between 1953 and 2006, the first section traces the history of attempts at constructing useful definitions of dietary fibre. Then the problems of measurement of the fibre content of foods, measurement of fibre intake in individuals and with testing for correlations with disease, are outlined.

The equivocal nature of current definitions of dietary fibre, and the lack of accuracy, validity or reliability of methods of determination, have been major limitations to developing an understanding its role in protecting human health. Perhaps more than for any other dietary constituent, the elucidation of the science describing the role of dietary fibre in human nutrition has been confounded by both known and unidentified variables.

This paper reflects an increasing scientific awareness that developments in nutrition are subject to the limitations of methods of analysis and research design. It explains why the processes of scientific investigation are often slow to reveal important relationships between dietary factors and health. This presents some difficulties for authorities charged with promoting health protective eating behaviours.

Although it has not been possible to unequivocally quantify dietary fibre or its effects on human metabolism, the research provides strong support for choosing a wide range of fresh or minimally intact plant food sources to protect health, as recommended in the FBDG's promoted in many countries around the world. The health protective effects may be achieved with moderation of the information disseminated about dietary fibre, particularly via the marketing of manufactured foods supplemented with fibre isolates.