Search results

Additive lamination manufacturing (ALM), as a novel additive manufacturing technology, builds up the geometry via the lamination of fiber-reinforced polymer (FRP) fabric laterally, rendering it suitable for fabricating large-scale Stay-in-Place concrete formwork. This paper aims to investigate the control parameters and structure performance of ALM and assess its application for the fabrication of large-scale concrete formwork.

Based on previous feasibility studies, this research systematically investigates the control and material parameters that influence horizontal and vertical extrusion speeds, as well as the overall quality of ALM. Once the system parameters are established, a series of prototypes are fabricated and tested to validate the tensile strength of the formwork and its reinforcement capabilities. In addition, this study assesses the potential geometric freedom and implementation constraints of ALM.

This research identifies the essential control parameters for path planning in ALM and examines their impact on fabrication. In addition, this paper evaluates ALM’s strengths and limitations in producing concrete formwork for large-scale concrete structures, comparing these to industry benchmarks.

A critical challenge in additive manufacturing lies in its scalability and compatibility with existing construction processes. In comparison to concrete, FRP offers advantages such as being lighter, easier to handle and providing surface protection and reinforcement. These qualities make FRP superior for formwork and compatible with existing building standards. Despite its advantages and potential, the current path planning and control model in 3D printing do not apply to ALM due to its novel build-up process. Also, the performance of fabricated parts as part of integrated large-scale structures is yet to be studied.

Presently in multicolor fused filament-based three-dimensional (3-D) printing, significant amounts of waste material are produced through nozzle priming and purging each time a change from one color to another occurs. G-code generating slicing software typically changes the material on each layer resulting in wipe towers with greater mass than the target object. The purpose of this study is to provide an alternative fabrication approach based on interlayer tool clustering (ITC) for the first time, which reduces the number of tool changes and is compatible with any commercial 3-D printer without the need for hardware modifications.

The authors have developed an open-source PrusaSlicer upgrade, compatible with Slic3r-based software, which uses the described algorithm to generate g-code toolpath and print experimental objects. The theoretical time, material and energy savings are calculated and validated to evaluate the proposed fabrication method qualitatively and quantitatively.

The experimental results show the novel ITC method can significantly increase the efficiency of multimaterial printing, with an average 1.7-fold reduction in material use, and an average 1.4-fold reduction in both time and 3-D printing energy use. In addition, this approach reduces the likelihood of technical failures in the manufacturing of the entire part by reducing the number of tool changes, or material transitions, on average by 2.4 times.

The obtained results support distributed recycling and additive manufacturing, which has both environmental and economic benefits and increasing the number of colors in a 3-D print increases manufacturing savings.

Additive manufacturing (AM) is growing economically because of its cost-effective design flexibility. However, it faces challenges such as interlaminar weaknesses and reduced strength because of product anisotropy. Therefore, the purpose of this study is to develop a methodology that integrates design for additive manufacturing (AM) principles with fused filament fabrication (FFF) to address these challenges, thereby enhancing product reliability and strength.

Developed through case analysis and literature review, this methodology focuses on design methodology for AM (DFAM) principles applied to FFF for high mechanical performance applications. A DFAM database is constructed to identify common requirements and establish design rules, validated through a case study.

Existing DFAM approaches often lack failure theory integration, especially in FFF, emphasizing mechanical characterizations over predictive failure analysis in functional parts. This methodology addresses this gap by enhancing product reliability through failure prediction in high-performance FFF applications.

While some DFAM methods exist for high-performance FFF, they are often specific cases. Existing DFAM methodologies typically apply broadly across AM processes without a specific focus on failure theories in functional parts. This methodology integrates FFF with a failure theory approach to strengthen product reliability in high-performance applications.

This study aims to present and evaluate a novel analytical model to predict the structural properties of parts fabricated by fused filament fabrication (FFF) along any non-orthogonal direction.

A new analytical model to estimate the ultimate tensile stress (UTS) and elastic modulus (E) of polylactic acid (PLA)-FFF parts fabricated in any non-orthogonal build orientation, is proposed. The new model is based on an ellipsoid, two angles that define the orientation with respect to the build axes, the infill value and the structural properties along the build axes. The proposed model is evaluated by comparing the UTS and E properties predicted by this model, with the results obtained from experimental tensile tests on PLA-FFF specimens manufactured using variable infill values and non-orthogonal build orientations.

The proposed model is able to predict with good precision the structural properties of PLA-FFF parts along any direction and infill value.

Although the study and results are limited to the UTS and E tensile properties of PLA-FFF components, the model may be extended to other materials or similar additive manufacturing processes.

The new proposed model is able to determine the structural properties of FFF components in any direction, so it can be used during the design process of FFF parts, reducing the need for experimental tests and speeding up the product development process.

Existing models to predict the structural properties of FFF components are limited to orthogonal build orientations (X, Y and Z); however, the new proposed model is able to predict the tensile properties in any direction and infill value. In addition, a new set of experimental data about the structural behaviour of PLA-FFF parts along non-orthogonal build orientations is provided, extending the existing results in the literature.

This study aims to address the challenge of reducing the build time of a fused deposition modeling (FDM) system while maintaining part strength, proposing a hybrid technique combining photopolymerization and FDM.

For developing the hybrid system, a standard FDM machine was modified to incorporate necessary components so that the whole system can be operated with a single interface; further, the samples were fabricated with conventional and modified process to evaluate the efficacy of the developed system, to determine the extent of time reduction that the proposed methodology can obtain, additionally different sort of 3D models were selected and their build time was compared.

The modified hybrid mechanism can successfully fabricate parts with a modified G-code. The simulation of the technique shows that a reduction of 34%–87% can be achieved for simpler models such as cube while a reduction ranging from 30.6%–87.8% was observed for complex models. An increase in strength of 6.58%, 11.51% and 37.32% was observed in X, Y and Z directions, along with a significant increase in toughness as compared with FDM parts for parts fabricated with the developed mechanism.

The modified mechanism could be used for fast fabrication purposes, which could be very useful for serving situations such as emergency health care, rapid tooling.

This research contributes a novel hybrid technique for additive manufacturing, offering a substantial reduction in build time without compromising mechanical properties, even increasing them.

This study aims to deepen the knowledge concerning the metal fused filament fabrication technology through an analysis of the printing parameters of a commercial 316L stainless steel filament and their influence on the porosity and mechanical properties of the printed parts. It also investigates the feasibility of manufacturing complex geometries, including strut-and-node and triply periodic minimal surface lattices.

A three-step experimental campaign was carried out. Firstly, the printing parameters were evaluated by analysing the green parts: porosity and density measurements were used to define the best printing profile. Then, the microstructure and porosity of the sintered parts were investigated using light optical and scanning electron microscopy, while their mechanical properties were obtained through tensile tests. Finally, manufacturability limits were explored with reference samples and cellular structures having different topologies.

The choice of printing parameters drastically influences the porosity of green parts. A printing profile which enables reaching a relative density above 99% has been identified. However, voids characterise the sintered components in parallel planes at the interfaces between layers, which inevitably affect their mechanical properties. Lattice structures and complex geometries can be effectively printed, debinded, and sintered if properly dimensioned to fulfil printing constraints.

This study provides an extensive analysis of the printing parameters for the 316L filament used and an in-depth investigation of the potential of the metal fused filament fabrication technology in printing lightweight structures.

The purpose of this paper is to review cases of artificial reefs built through additive manufacturing (AM) technologies and analyse their ecological goals, fabrication process, materials, structural design features and implementation location to determine predominant parameters, environmental impacts, advantages, and limitations.

The review analysed 16 cases of artificial reefs from both temperate and tropical regions. These were categorised based on the AM process used, the mortar material used (crucial for biological applications), the structural design features and the location of implementation. These parameters are assessed to determine how effectively the designs meet the stipulated ecological goals, how AM technologies demonstrate their potential in comparison to conventional methods and the preference locations of these implementations.

The overview revealed that the dominant artificial reef implementation occurs in the Mediterranean and Atlantic Seas, both accounting for 24%. The remaining cases were in the Australian Sea (20%), the South Asia Sea (12%), the Persian Gulf and the Pacific Ocean, both with 8%, and the Indian Sea with 4% of all the cases studied. It was concluded that fused filament fabrication, binder jetting and material extrusion represent the main AM processes used to build artificial reefs. Cementitious materials, ceramics, polymers and geopolymer formulations were used, incorporating aggregates from mineral residues, biological wastes and pozzolan materials, to reduce environmental impacts, promote the circular economy and be more beneficial for marine ecosystems. The evaluation ranking assessed how well their design and materials align with their ecological goals, demonstrating that five cases were ranked with high effectiveness, ten projects with moderate effectiveness and one case with low effectiveness.

AM represents an innovative method for marine restoration and management. It offers a rapid prototyping technique for design validation and enables the creation of highly complex shapes for habitat diversification while incorporating a diverse range of materials to benefit environmental and marine species’ habitats.

The aim of this study is to investigate the printing parameters of fused deposition modeling (FDM), a material extrusion-based method, and to examine the mechanical and thermal properties of their polylactic acid (PLA) components reinforced with copper, bronze, and carbon fiber micro particles.

Tensile test samples were created by extruding composite filament materials using FDM-based 3D printer. Taguchi method was used to design experiments where layer thickness, infill density, and nozzle temperature were the printing variables. Analysis of variance (ANOVA) was applied to determine the effect of these variables on tensile strength.

The results of this study showed that the reinforcement of metal particles in PLA material reduces strength and increases elongation. The highest tensile strength was obtained when the layer thickness, infill density, and nozzle temperature were set to 100 µm, 60%, and 230 °C, respectively. As a result of thermal analysis, cooper-PLA showed the highest thermal resistance among metal-based PLA samples.

It is very important to examine the mechanical and thermal quality of parts fabricated in FDM with metal-PLA composites. In the literature, the mechanical properties of metal-reinforced composite PLA parts have been examined using different factors and levels. However, the fabrication of parts using the FDM method with four different metal-added PLA materials has not been examined before. Another unique aspect of the study is that both mechanical and thermal properties of composite materials will be examined.

This paper aims to examine rising geopolitical tensions associated with the implementation of the US Creating Helpful Incentives to Produce Semiconductors (CHIPS) Act of 2022.

To provide background for the analysis, the authors conduct a theoretic analysis of the literature to introduce the current geopolitical environment while examining the rising threat of conflict, general factors driving change in the world order, and the critical role that the international semiconductor supply chain plays to all involved.

In this paper, the authors observe that in good times, economic forces drive capital-intensive industries toward a free-trade-inspired concentration of manufacturing in low-cost centers of production. In challenging economic and geopolitical times, however, the trend reverses toward retrenchment and what some call techno-nationalism. This occurs as nations struggle to secure access to critical sources of supply for themselves while stifling access for competitors and rivals.

The CHIPS Act of 2022 signifies a pivotal change in global trade dynamics, shifting away from liberal norms to techno-nationalism. This shift may spark supply chain hurdles as countries adopt nationalistic sourcing, potentially causing shortages in vital components like chips. Consequently, consumers may face disruptions as companies seek alternative suppliers, resulting in higher costs and lower-quality products. Supply chain disruptions may also delay product launches, and retaliatory trade actions could affect multiple industries, limiting access to lucrative markets.

The passage of the US CHIPS Act of 2022 has major implications related to global supply chain issues and potential geopolitical concerns. This study uses the threat of potential conflict as a lens for examining the international semiconductor supply chain.