A novel model to estimate the structural properties of PLA-FFF components along any non-orthogonal direction
Abstract
Purpose
This study aims to present and evaluate a novel analytical model to predict the structural properties of parts fabricated by fused filament fabrication (FFF) along any non-orthogonal direction.
Design/methodology/approach
A new analytical model to estimate the ultimate tensile stress (UTS) and elastic modulus (E) of polylactic acid (PLA)-FFF parts fabricated in any non-orthogonal build orientation, is proposed. The new model is based on an ellipsoid, two angles that define the orientation with respect to the build axes, the infill value and the structural properties along the build axes. The proposed model is evaluated by comparing the UTS and E properties predicted by this model, with the results obtained from experimental tensile tests on PLA-FFF specimens manufactured using variable infill values and non-orthogonal build orientations.
Findings
The proposed model is able to predict with good precision the structural properties of PLA-FFF parts along any direction and infill value.
Research limitations/implications
Although the study and results are limited to the UTS and E tensile properties of PLA-FFF components, the model may be extended to other materials or similar additive manufacturing processes.
Practical implications
The new proposed model is able to determine the structural properties of FFF components in any direction, so it can be used during the design process of FFF parts, reducing the need for experimental tests and speeding up the product development process.
Originality/value
Existing models to predict the structural properties of FFF components are limited to orthogonal build orientations (X, Y and Z); however, the new proposed model is able to predict the tensile properties in any direction and infill value. In addition, a new set of experimental data about the structural behaviour of PLA-FFF parts along non-orthogonal build orientations is provided, extending the existing results in the literature.
Keywords
Acknowledgements
The authors would like to thank the financial support from the National Humanities, Science and Technology Council (CONAHCYT) of Mexico, grant number CB-2010-01-154430. The first author also acknowledges CONAHCYT for the scholarship providing during her PhD studies.
Citation
Cerda-Avila, S.N. and Medellín-Castillo, H.I. (2024), "A novel model to estimate the structural properties of PLA-FFF components along any non-orthogonal direction", Rapid Prototyping Journal, Vol. ahead-of-print No. ahead-of-print. https://doi.org/10.1108/RPJ-01-2024-0051
Publisher
:Emerald Publishing Limited
Copyright © 2024, Emerald Publishing Limited