Search results

In the field of research on the application of digital printing to textile materials, there are still many research issues that arise from the very demanding interaction of digital printing technology and the complex, heterogeneous surface system of textile materials. This is precisely why the area of pre-treatment of textile materials is in need of research, and the purpose of this research was to establish the level of influence of physical and chemical activation of the textile surface with plasma and the possibility of improving the quality of the print and colour reproduction.

The paper deals with the possibility of applying argon and oxygen cold low-pressure plasma in the processing of cellulose knitted fabrics, with the aim of improving the quality of the print and colour reproduction in digital pigment inkjet printing. The selected raw material samples were 100% raw cotton and lyocell. After plasma treatment, the samples were printed by digital ink jet printing with water-based pigment printing ink. An analysis of the micromorphological structure of untreated and plasma-treated samples before and after printing was carried out, and a comparative analysis of the colour of the printed elements was carried out depending on the pre-treatment.

The conducted research showed a positive influence of plasma pre-treatment on the coverage of the fibre surface with pigments, the uniformity of pigment distribution along the fibre surface and the uniformity of the distribution of the polymeric binder layer. This has a positive effect on colour reproduction. Also, certain improvements in colourfastness to washing were obtained.

Considering the complexity of the topic, although exhaustive, this research is not sufficient in itself, but opens up new questions and gives ideas for further research that must be carried out in this area.

Also, this kind of research contributes to the possibility of adopting the idea of industrial plasma transformation, as an ecologically sustainable functionalisation of textiles, which has not yet been established.

This research is certainly a contribution to the establishment of acceptable textile pre-treatment methods in the field of digital printing, as one of the key quality factors in digital textile printing (DTP). Considering the still large number of obstacles and unanswered questions encountered in the field of digital printing on textiles, this kind of research is a strong contribution to the understanding of the fundamental mechanisms of the complex interaction between printing ink and textile.

The purpose of this paper is to analyze the individual steps during the printing of capacitor structures. The method of substrate preparation, the obtained roughness of conductive and dielectric layers are examined. Moreover, the capacitances of the obtained capacitors were examined.

Surface roughness and microscopic analysis were used to assess the quality of printed conductive structures. Two criteria were used to assess the quality of printed dielectric structures: the necessary lack of discontinuity of layers and minimal roughness. To determine the importance of printing parameters, a draft experimental method was proposed.

The optimal way to clean the substrate has been determined. The most important parameters for the dielectric layer (i.e. drop-space, table temperature, curing time and temperature) were found.

If dielectric layers are printed correctly, most problems with printing complex electronic structures (transistors, capacitors) will be eliminated.

The tests performed identified the most important factors for dielectric layers. Using them, capacitors of repeatable capacity were printed.

In the literature on this subject, no factors were found which were responsible for obtaining homogeneous dielectric layers.

To promote the cultural communication and art appreciation of Inscriptions and calligraphy which are important cultural heritages in China, with a broad crowd base and educational appreciation value, by using digital humanities methods and technologies, the paper aims to discuss how to develop a new user-oriented knowledge base according to user needs for inscription rubbings research and appreciation.

The paper investigates user needs and current problems on the basis of status quo and summation of extensive service experience; validates the rationality of requirements and user scenarios with user research methods including focus groups, interviews and behavior observations; then designs and develops the technical solution of data process, knowledge base construction and service platform through experimental research methods based on agile project management.

The paper proposes a new reading mode for browsing and appreciation inscription rubbing works, a diverse knowledge-integrated knowledge organizational structure, a systematic user experience and service guiding framework which can be widely applicable to the development of other cultural heritage knowledge bases. Apart from that, the paper puts forward intelligent service development goals for the future.

The paper proposes a new reading mode with the overall functions and user experience design and development for browsing and appreciation inscription rubbing works, a diverse knowledge-integrated knowledge organizational structure, a systematic user experience and service guiding framework which can be widely applicable to the development of other cultural heritage knowledge bases. Apart from that, the paper puts forward intelligent service development goals for the future.

The purpose of this work was to characterize NiMn₂O₄ spinel-based thermistor powder, to use it in screen printing technology to fabricate temperature sensors, to study their performance for different sintering temperatures of thermistor layer, with and without insulative cover, as well as to investigate stability of the fabricated thermistors and their applicability in water quality monitoring.

After the characterization of starting NiMn₂O₄ spinel-based thermistor powder, it was converted to thick film paste which was screen printed on alumina substrate. Thermistor layers were sintered at four different sintering temperatures: 980°C, 1050°C, 1150°C and 1290°C. An interdigitated pattern of Ag-Pd conductive layer was used to reduce the resistance. Temperature-resistance characteristics were investigated in air and water, with and without insulative cover atop the thermistor layer. Stability of the fabricated thermistors after aging at 120°C for 300 h was also examined.

Thick film NiMn₂O₄ spinel thermistors, prepared by screen printing and sintering in the temperature range 980°C–1290°C, exhibited good negative temperature coefficient (NTC) characteristics in the temperature range −30°C to 145°C, including high temperature coefficient of resistance, good stability and applicability in water.

This study explores the range of sintering temperature that can be applied for NiMn₂O₄ thermistor thick films without compromising on the temperature sensing performance in air and water, as well as stability of the thermistors after aging at elevated temperatures.

This article explores the scientific construction of library olfactory space, based on the case of the olfactory space in the Jiangsu University library. It specifically focuses on understanding the interaction between the physical architectural space of the library and users’ olfactory perception and behavioral activities, with the ultimate goal of creating a deeply integrated olfactory experience in the Jiangsu University Library.

In this article, an empirical research method was used to gather perceptions from 30 university student users regarding the library olfactory space and to understand their olfactory preferences and requirements for its construction. Through qualitative analysis of the interview texts, the study identified correlations between user perceptions and elements of the library olfactory space.

The qualitative analysis of user interview texts and results from the library olfactory space design experiment contributed to the design proposal for the Jiangsu University Library olfactory space. The design proposal for the Jiangsu University Library olfactory space is provided and includes library architecture, activity context, functional services, olfactory experience design and technological applications.

This case study takes the environment, development strategy and user needs of the Jiangsu University Library as its unique research background and as such is not universal or generalizable to other libraries.

This article differs from others by advocating for the innovative architectural spatial design of libraries through olfactory experience, breaking the traditional perception of libraries as solely through visual and auditory senses.

The purpose of this paper is to investigate the challenges faced with mobile information communication technology (M-ICT), more specifically tablet software, in the construction phase of UK infrastructure projects. Quality assurance in the context of passive fire protection is scrutinised, where M-ICT use is prevalent, to provide an industry perspective.

The research design is founded on exploratory multiple case study approach. Specific themes are developed, based on a critical review of previous ICT studies. The themes identified are used to inform a qualitative interview protocol for investigating three large UK infrastructure projects. Each project is at different stages in the construction phase, with varying examples of M-ICT implementation in use. Participants are interviewed regarding their experiences of the implementation of M-ICT on each project.

Findings identify diverse experiences across each project. Single and multiple M-ICT platforms are currently being used, with individual stakeholders using ICT in isolation, and in some instances, multiple project stakeholders are using it together. Complete replacement of paper-based processes is evident in one case study, but more commonly, digital technology is being used in parallel to traditional paper-based processes. The challenges, although varied across each case study, can be categorised under the themes of Technology (IT support, ICT infrastructure, IT security, contractual, software), People (social aspects, user competency, safety), Technical Compliance (technical compliance evidence) and Process (conventional processes).

It is recommended that each theme be reviewed at project commencement, with all key stakeholders, to ensure key aspects are considered prior to M-ICT deployment. This will ensure avoidance of challenges reported and maximise the opportunities that are available through M-ICT in a multi-stakeholder infrastructure project.

The purpose of this paper is to show that the droplet impact phenomenon is important for the advancement of industrial technologies in many fields such as spray cooling and ink jet printing. Droplet bouncing on the nonwetting surfaces is a special phenomenon in the impact process which has attracted lots of attention.

In this work, the authors fabricated two kinds of representative nonwetting surfaces including superhydrophobic surfaces (SHS) and a slippery liquid-infused porous surface (SLIPS) with advanced UV laser processing.

The droplet bouncing behavior on the two kinds of nonwetting surfaces were compared in the experiments. The results indicate that the increasing Weber number enlarges the maximum droplet spreading diameter and raises the droplet bounce height but has no effect on contact time.

In addition, the authors find that the topological SHS and SLIPS with the laser-processed microwedge groove array produce asymmetric droplet bouncing with opposite offset direction. Microdroplets can be continuously transported without any additional driving force on such a topological SLIPS. The promising method for manipulating droplets has potential applications for the droplet-based microfluidic platforms.