Search results

The noise and dust particles caused by the construction transport are by most stakeholders experienced as disturbing. The purpose of this study is to explore how sonification can support visualization in construction planning to decrease construction transport disturbances.

This paper presents an interdisciplinary research project, combining research on construction logistics, internet of things and sonification. First, a data recording device, including sound, particle, temperature and humidity sensors, was implemented and deployed in a development project. Second, the collected data were used in a sonification design, which was, third, evaluated with potential users.

The results showed that the low-cost sensors used could capture “good enough” data, and that the use of sonification for representing these data is interesting and a possible useful tool in urban and construction transport planning.

There is a need to further evolve the sonification design and better communicate the aim of the sounds used to potential users. Further testing is also needed.

This study introduces new ideas of how to support visualization with sonification planning the construction work and its impact on the vicinity of the site. Currently, urban planning and construction planning focus on visualizing the final result, with little focus on how to handle disturbances during the construction process.

Showing the potentials of using low-cost sensor data in sonification, and using sonification together with visualization, is the result of a novel interdisciplinary research area combination.

Know your customer (KYC), accounting standards, issuance, clearing, and trade settlement became the major barrier to implement accounting, accountability and assurance process in supply chain finance (SCF). Blockchain technology features have the potential to solve accounting problems. This research focuses on exploring how blockchain technology provides solutions to overcome the barriers of accounting process in SCF. The benefits, opportunities, costs and risks related to blockchain adoption are also explored.

Multi-case study and qualitative methods are used with a framework based on blockchain role to overcome the accounting process barriers. Ten blockchain projects in SCF and 29 interviews of participants as a unit of analysis are considered.

The findings indicate that blockchain technology offers solutions to solve accounting, accountability and assurance problems in SCF. Validity, verification, smart contracts, automation and enduring data on trade transactions potentially solve those barriers. However, it is also necessary to consider costs such as implementation, technology, education and integration costs. Then there are possible risks such as regulatory compliance, operational, code development and scalability risk. This finding reflects the current status of blockchain technology roles in SCF.

This study unveils blockchain's SCF accounting potential, emphasizing multi-case method limitations and future research prospects. Diverse contexts challenge findings' applicability, warranting cross-industry studies for deeper insights. Addressing selection bias and integrating quantitative measures can enhance understanding of blockchain's accounting impact.

Accounting professionals can get an idea of the future direction and impact of blockchain technology on accounting, accountability and assurance processes.

This study provides initial findings on the potential, costs and risks of blockchain that is beneficial for parties involved in SCF, especially for banks and insurance underwriters. In addition, the findings also provide direction for the contribution of blockchain technology to accounting theory in the future.

The purpose of this paper is to construct a digital collection and database of traditional clothing that is convenient for the digital dissemination and application of traditional clothing and provide resources for research on clothing fashion, traditional clothing techniques, clothing culture, history and clothing teaching.

A real object analysis method was used in this paper, based on 15 core elements of the internationally common DC metadata standard, and with consideration to the characteristics of clothing products and clothing industry application specifications, the core elements of DC are expanded to facilitate the detailed record of the characteristic information of clothing, especially the implicit clothing culture. A code symbol compilation method was developed to give each piece of clothing a unique number, facilitating identification, classification and recording. At last, a metadata construction scheme for traditional clothing was developed. A traditional embroidered children's hat and Mamianqunt serve as examples to demonstrate the metadata elements.

The clothing meta-database provides a main body of traditional clothing while also paying attention to the collection of cultural elements. It is composed of five layers of classified data, source data, characteristic data, connotation data and management data, as well as 28 data elements, providing ease of sharing and interoperation.

This paper expands the subset of fashion metadata by describing traditional clothing metadata, especially the excavation of clothing cultural elements, and developing code compilation methods so that each clothing product can obtain a unique identification number, thereby building a traditional clothing metadata construction scheme consisting of five data layers and containing 28 data elements. This scheme records the information about each layer of traditional clothing in detail and provides shared data for discipline research and industry applications.

Telemedicine, similarly to social media, accelerates information exchange, enriches information, provides better access to information and, furthermore, has an impact on mobilizing resources in business-to-business relationships. This paper aims to contribute to the understanding of the changes brought about by telemedicine, as a new technology, in patient routes.

This case study method was applied to examine five health-care protocols through their patient routes (series of activities) with and without telemedicine technology. The ARA model was applied to examine the changes telemedicine engendered in relation to activities, resources and actors. The strategy of visual mapping was applied for the comparative analysis.

The analyzed cases show that the new resources applied through telemedicine technology modified the number and substance of relevant activities and the set and role of actors who were involved. The quantity or the availability of output information increased in patient routes when new resources were added by telemedicine technology. When technology change occurred, any change in data or information systems – the two building blocks of information – could result in new or modified activities. If data that is used or produced while undertaking an activity change simultaneously along with the information system used for encrypting this data, then this “joint change” will certainly entail some kind of change in the set of activities, resources or actors that are involved. If not, then the activities continued the same as with the face-to-face protocol (without the new technology).

The novelty of the paper is that the results highlight the role of information in the extent of change in interactions induced by new technology. Findings about such changes show how information influenced by activities, resources and actors can help decision-makers in relation to the use of telemedicine.

Depression is a mental health problem characterized by a persistent sense of sadness and loss of interest. EEG signals are regarded as the most appropriate instruments for diagnosing depression because they reflect the operating status of the human brain. The purpose of this study is the early detection of depression among people using EEG signals.

(i) Artifacts are removed by filtering and linear and non-linear features are extracted; (ii) feature scaling is done using a standard scalar while principal component analysis (PCA) is used for feature reduction; (iii) the linear, non-linear and combination of both (only for those whose accuracy is highest) are taken for further analysis where some ML and DL classifiers are applied for the classification of depression; and (iv) in this study, total 15 distinct ML and DL methods, including KNN, SVM, bagging SVM, RF, GB, Extreme Gradient Boosting, MNB, Adaboost, Bagging RF, BootAgg, Gaussian NB, RNN, 1DCNN, RBFNN and LSTM, that have been effectively utilized as classifiers to handle a variety of real-world issues.

1. Among all, alpha, alpha asymmetry, gamma and gamma asymmetry give the best results in linear features, while RWE, DFA, CD and AE give the best results in non-linear feature. 2. In the linear features, gamma and alpha asymmetry have given 99.98% accuracy for Bagging RF, while gamma asymmetry has given 99.98% accuracy for BootAgg. 3. For non-linear features, it has been shown 99.84% of accuracy for RWE and DFA in RF, 99.97% accuracy for DFA in XGBoost and 99.94% accuracy for RWE in BootAgg. 4. By using DL, in linear features, gamma asymmetry has given more than 96% accuracy in RNN and 91% accuracy in LSTM and for non-linear features, 89% accuracy has been achieved for CD and AE in LSTM. 5. By combining linear and non-linear features, the highest accuracy was achieved in Bagging RF (98.50%) gamma asymmetry + RWE. In DL, Alpha + RWE, Gamma asymmetry + CD and gamma asymmetry + RWE have achieved 98% accuracy in LSTM.

A novel dataset was collected from the Central Institute of Psychiatry (CIP), Ranchi which was recorded using a 128-channels whereas major previous studies used fewer channels; the details of the study participants are summarized and a model is developed for statistical analysis using N-way ANOVA; artifacts are removed by high and low pass filtering of epoch data followed by re-referencing and independent component analysis for noise removal; linear features, namely, band power and interhemispheric asymmetry and non-linear features, namely, relative wavelet energy, wavelet entropy, Approximate entropy, sample entropy, detrended fluctuation analysis and correlation dimension are extracted; this model utilizes Epoch (213,072) for 5 s EEG data, which allows the model to train for longer, thereby increasing the efficiency of classifiers. Features scaling is done using a standard scalar rather than normalization because it helps increase the accuracy of the models (especially for deep learning algorithms) while PCA is used for feature reduction; the linear, non-linear and combination of both features are taken for extensive analysis in conjunction with ML and DL classifiers for the classification of depression. The combination of linear and non-linear features (only for those whose accuracy is highest) is used for the best detection results.

In the frame of the European RFCS TRAFIR project, three large compartment fire tests involving steel structure were conducted by Ulster University, aiming at understanding in which conditions a travelling fire develops, as well as how it behaves and impacts the surrounding structure.

During the experimental programme, the path and geometry of the travelling fire was studied and temperatures, heat fluxes and spread rates were measured. Influence of the travelling fire on the structural elements was also monitored during the travelling fire tests.

This paper provides details related to the influence of travelling fires on a central structural steel column.

The experimental data are presented in terms of the gas temperatures recorded in the test compartment near the column, as well as the temperatures recorded in the steel column at different levels. Because of the large data, only fire test one results are discussed in this paper.

The aim of this paper is to examine how indoor aromatization affects the expressed and unexpressed satisfaction with the work environment in the production hall of an industrial company.

The aroma was flavored by an aromatization unit, the expressed satisfaction was measured on a scale and biometrics of facial recognition (FaceReader) was used to measure unexpressed satisfaction, enabling the recording of eight emotions and two basic emotions.

Research has shown the effect of aroma on two emotions – neutral and angry – which partially confirmed the sense of flavoring production facilities. Previous research has shown that positive feelings caused by a pleasant smell influence customers' purchasing decisions. As the use of aroma affects the mental state of the individual, it could be also applied for non-marketing purposes.

To date, there has been no research that systematically addresses the impact of aromatization on the perception of the work environment in a manufacturing company. The presented study is unique in its design and focus and provides basic information about the impact of aroma on individuals. The findings of this study can help to examine further aspects that indirectly affect performance.

This study was conducted with the main purpose of recording primary data related to environmental factors, which has become the main criteria in the selection of the Sungai Batu Archaeological Complex (SBAC) as the center of the iron smelting industry and trade in ancient Kedah.

To fulfill this purpose, field studies involving drone photogrammetry mapping, augering, core drilling and geophysical mapping methods were carried out.

The results obtained through the application of the method have shown that SBAC has a good environment, which has a wide and deep river flow, the existence of Mount Jerai and the abundance of iron ores, mangrove Merbok and clay.

Resources did not allow for environment studies of the by-products tourism sites as part of the current study.

The study also included a survey and mapping to obtain potential primary data around SBAC in the process of developing it as the center of the world iron industry.

One finding is that attention to heritage policy and protection must be ongoing at all levels of government and the local community to ensure that the survey and mapping data carried out can be developed as a sustainable heritage tourism product.

This study reveals primary data related to the suitability of paleoenvironment in the SBAC development process as a world iron smelting industry area.

The overall goal of the data mining process is to extract information from an extensive data set and make it understandable for further use. When working with large volumes of unstructured data in research information systems, it is necessary to divide the information into logical groupings after examining their quality before attempting to analyze it. On the other hand, data quality results are valuable resources for defining quality excellence programs of any information system. Hence, the purpose of this study is to discover and extract knowledge to evaluate and improve data quality in research information systems.

Clustering in data analysis and exploiting the outputs allows practitioners to gain an in-depth and extensive look at their information to form some logical structures based on what they have found. In this study, data extracted from an information system are used in the first stage. Then, the data quality results are classified into an organized structure based on data quality dimension standards. Next, clustering algorithms (K-Means), density-based clustering (density-based spatial clustering of applications with noise [DBSCAN]) and hierarchical clustering (balanced iterative reducing and clustering using hierarchies [BIRCH]) are applied to compare and find the most appropriate clustering algorithms in the research information system.

This paper showed that quality control results of an information system could be categorized through well-known data quality dimensions, including precision, accuracy, completeness, consistency, reputation and timeliness. Furthermore, among different well-known clustering approaches, the BIRCH algorithm of hierarchical clustering methods performs better in data clustering and gives the highest silhouette coefficient value. Next in line is the DBSCAN method, which performs better than the K-Means method.

In the data quality assessment process, the discrepancies identified and the lack of proper classification for inconsistent data have led to unstructured reports, making the statistical analysis of qualitative metadata problems difficult and thus impossible to root out the observed errors. Therefore, in this study, the evaluation results of data quality have been categorized into various data quality dimensions, based on which multiple analyses have been performed in the form of data mining methods.

Although several pieces of research have been conducted to assess data quality results of research information systems, knowledge extraction from obtained data quality scores is a crucial work that has rarely been studied in the literature. Besides, clustering in data quality analysis and exploiting the outputs allows practitioners to gain an in-depth and extensive look at their information to form some logical structures based on what they have found.

Road traffic emissions are generally believed to contribute immensely to air pollution, but the effect of road traffic data sets on air quality (AQ) predictions has not been fully investigated. This paper aims to investigate the effects traffic data set have on the performance of machine learning (ML) predictive models in AQ prediction.

To achieve this, the authors have set up an experiment with the control data set having only the AQ data set and meteorological (Met) data set, while the experimental data set is made up of the AQ data set, Met data set and traffic data set. Several ML models (such as extra trees regressor, eXtreme gradient boosting regressor, random forest regressor, K-neighbors regressor and two others) were trained, tested and compared on these individual combinations of data sets to predict the volume of PM_2.5, PM₁₀, NO₂ and O₃ in the atmosphere at various times of the day.

The result obtained showed that various ML algorithms react differently to the traffic data set despite generally contributing to the performance improvement of all the ML algorithms considered in this study by at least 20% and an error reduction of at least 18.97%.

This research is limited in terms of the study area, and the result cannot be generalized outside of the UK as some of the inherent conditions may not be similar elsewhere. Additionally, only the ML algorithms commonly used in literature are considered in this research, therefore, leaving out a few other ML algorithms.

This study reinforces the belief that the traffic data set has a significant effect on improving the performance of air pollution ML prediction models. Hence, there is an indication that ML algorithms behave differently when trained with a form of traffic data set in the development of an AQ prediction model. This implies that developers and researchers in AQ prediction need to identify the ML algorithms that behave in their best interest before implementation.

The result of this study will enable researchers to focus more on algorithms of benefit when using traffic data sets in AQ prediction.