Search results

The noise and dust particles caused by the construction transport are by most stakeholders experienced as disturbing. The purpose of this study is to explore how sonification can support visualization in construction planning to decrease construction transport disturbances.

This paper presents an interdisciplinary research project, combining research on construction logistics, internet of things and sonification. First, a data recording device, including sound, particle, temperature and humidity sensors, was implemented and deployed in a development project. Second, the collected data were used in a sonification design, which was, third, evaluated with potential users.

The results showed that the low-cost sensors used could capture “good enough” data, and that the use of sonification for representing these data is interesting and a possible useful tool in urban and construction transport planning.

There is a need to further evolve the sonification design and better communicate the aim of the sounds used to potential users. Further testing is also needed.

This study introduces new ideas of how to support visualization with sonification planning the construction work and its impact on the vicinity of the site. Currently, urban planning and construction planning focus on visualizing the final result, with little focus on how to handle disturbances during the construction process.

Showing the potentials of using low-cost sensor data in sonification, and using sonification together with visualization, is the result of a novel interdisciplinary research area combination.

The study, within the Increasing Resilience of Cultural Heritage (ResCult) project, aims to support civil protection to prevent, lessen and mitigate disasters impacts on cultural heritage using a unique standardised-3D geographical information system (GIS), including both heritage and risk and hazard information.

A top-down approach, starting from existing standards (an INSPIRE extension integrated with other parts from the standardised and shared structure), was completed with a bottom-up integration according to current requirements for disaster prevention procedures and risk analyses. The results were validated and tested in case studies (differentiated concerning the hazard and type of protected heritage) and refined during user forums.

Besides the ensuing reusable database structure, the filling with case studies data underlined the tough challenges and allowed proposing a sample of workflows and possible guidelines. The interfaces are provided to use the obtained knowledge base.

The increasing number of natural disasters could severely damage the cultural heritage, causing permanent damage to movable and immovable assets and tangible and intangible heritage. The study provides an original tool properly relating the (spatial) information regarding cultural heritage and the risk factors in a unique archive as a standard-based European tool to cope with these frequent losses, preventing risk.

Due to the unknown location, size and timing of disasters, the rapid response required by humanitarian operations (HO) faces high uncertainty and limited time to raise funds. These harsh realities make HO challenging. This study aims to systematically capture the complex dynamic relationships between operations in humanitarian settings.

To achieve this goal, the authors undertook a systematic review of the extant academic literature linking HO to system dynamics (SD) simulation.

The research reviews 88 papers to propose a taxonomy of different topics covered in the literature; a framework represented through a causal loop diagram (CLD) to summarise the taxonomy, offering a view of operational activities and their linkages before and after disasters; and a research agenda for future research avenues.

As the authors provide an adequate representation of reality, the findings can help decision makers understand the problems faced in HO and make more effective decisions.

While other reviews on the application of SD in HO have focused on specific subjects, the current research presents a broad view, summarising the main results of a comprehensive CLD.

The key aim of this study is to highlight current financial technology (FinTech) trends by conducting a bibliometric review of literature derived from the Scopus database.

A bibliometric analysis was conducted on articles gathered from the Scopus database. Microsoft Excel was used to perform the frequency analysis, VOSviewer for visualising the data, and Harzing’s Publish or Perish for the metrics citation.

According to this investigation, research into FinTech has been consistently increasing since 2008. The results indicate that the most active publisher of FinTech literature is Bina Nusantara University in Indonesia. In terms of country of publication, China is identified as the most active. The most cited author is Buckley, R.P., with Rabbani, M.R., having the most publications. It was also identified that FinTech researches come under three primary domains namely business management, computer science and economics.

The primary limitation of this current study is that it only relied on one data source, i.e. Scopus. Implications wise, researchers and practitioners can gain a deeper understanding of FinTech from this study, which also describes the trend in related publications on the concept. Future studies could significantly benefit from the findings of the present paper.

The outcomes of this study can assist researchers in better comprehending and summarising the key drivers of FinTech. In addition, the findings can help new researchers identify the starting point for their research on FinTech.

As far as the authors are aware, this is the first study that reviews FinTech publications derived from Scopus from 2008 to 2022. Hence, it is a pioneering study into FinTech bibliometric analysis, providing an understanding of the structural knowledge by reviewing the timeline of academic progression in FinTech.

The purpose of this paper is to present a comprehensive analysis of the carbon footprint of the Delft University of Technology (TU Delft), including direct and indirect emissions from utilities, logistics and purchases, as well as a discussion about the commonly used method. Emissions are presented in three scopes (scope 1 reports direct process emissions, scope 2 reports emissions from purchased energy and scope 3 reports indirect emissions from the value chain) to identify carbon emission hotspots within the university’s operations.

The carbon footprint was calculated using physical and monetary activity data, applying a process and economic input-output analysis.

TU Delft’s total carbon footprint in 2018 is calculated at 106 ktCO₂eq. About 80% are indirect (scope 3) emissions, which is in line with other studies. Emissions from Real estate and construction, Natural gas, Equipment, ICT and Facility services accounted for about 64% of the total footprint, whereas Electricity, Water and waste-related carbon emissions were negligible. These findings highlight the need to reduce universities’ supply chain emissions.

A better understanding of carbon footprint hotspots can facilitate strategies to reduce emissions and finally achieve carbon neutrality. In contrast to other work, it is argued that using economic input-output models to calculate universities’ carbon footprints is a questionable practice, as they can provide only an initial estimation. Therefore, the development of better-suited methods is called for.

The purpose of this paper is to develop a framework to evaluate and assess the performance of the COVID-19 vaccine distribution process that is sensitive to the unique supply-side and demand-side constraints exhibited in the US vaccine rollout.

A queuing framework that operates under two distinct regimes is formulated to analyze service rates that represent system capacity to vaccinate (under the first regime) and hesitancy-induced throughput (under the second regime). These supply- and hesitancy-constrained regimes form the focus of the present paper, as the former reflects the inherent ability of the nation in its various jurisdictions to mobilize, whereas the latter reflects a critical area for public policy to protect the population’s overall health and safety.

The two-regime framework analysis provides insights into the capacity to vaccinate and hesitancy-constrained demand, which is found to vary across the country primarily by politics and region. The framework also allows analysis of the end-to-end supply chain, where it is found that the ability to vaccinate was likely constrained by last-mile administration issues, rather than the capacity of the manufacturing and transportation steps of the supply chain.

This study presents a new framework to consider end-to-end supply chains as dynamic systems that exhibit different regimes because of unique supply- and demand-side characteristics and estimate rollout capacity and underlying determinants at the national, state and county levels.

This study aims to investigate patterns in international travel behavior of scientific staff depending on the categories of gender, scientific field and scientific seniority level. The learning from salient differences possibly revealed may inform measures for reducing travel greenhouse gas (GHG) emissions, especially for high-emitting staff groups, and help strengthen the equality between scientists of different categories concerning their travel behavior.

The study collected and used novel empirical data on travel GHG emissions from University of Graz scientific staff for five consecutive years (2015–2019) and used statistical analysis and inference to test and answer three distinct research questions on patterns of travel behavior.

The travel footprint of scientific staff, in terms of annual GHG emissions per scientist, exhibits various highly significant differences across scientific fields, seniority and gender, such as male senior natural scientists showing ten times higher per-person emissions than female junior social scientists.

The five-year travel GHG emissions data set across all fields from natural sciences via social sciences to humanities at a large university (Uni Graz, Austria, about 2,000 scientific staff) and across seniority levels from predocs to professors, both for female and male scientists, enabled a robust empirical study revealing distinct differences in travel GHG footprints of academic staff. In this way, the study adds valuable insights for higher research institutions toward effective GHG reduction policies.

Mapping and Geographic Information Systems (GIS) are widely used in disaster research and practice. While, in some cases, these practices incorporate methods inspired by critical cartography and critical GIS, they rarely engage with the theoretical discussions that animate those fields.

In this commentary, the author considers three such discussions, and draws out their relevance for disaster studies: the turn towards processual cartographies, political economy analysis of datafication and calls for theorising computing of and from the South.

The review highlights how these discussions can contribute to the work of scholars engaged in mapping for disaster risk management and research. First, it can counter the taken-for-granted nature of disaster-related maps, and encourage debate about how such maps are produced, used and circulated. Second, it can foster a reflexive attitude towards the urge to quantify and map disasters. Third, it can help to rethink the role of digital technologies with respect to ongoing conversations on the need to decolonise disaster studies.

The paper aims to familiarise disaster studies scholars with literature that has received relatively little attention in this field and, by doing so, contribute to a repoliticisation of disaster-related maps.

The UN Sustainable Development Goals (SDGs) provide a framework to achieve sustainable development and fulfilling these Goals will take an unprecedented effort by all sectors in society. Many universities and businesses are using the Goals within their strategies and sustainability reporting. However, this is difficult as there is currently no standard methodology to map the 17 goals, 169 targets and 232 indicators. Work at the University of Leicester has focused on developing a robust methodology to map a higher education institution's (HEI's) research contribution to the Goals. We have integrated this unique methodology into an automated software tool to measure a university's academic contribution to the Goals using mathematical text mining techniques. Our ability to quickly and effectively map institutions' research contributions has boosted our ambitions and efforts to develop software to map the full operations of an HEI or business.

The overall objective of this study is envisaged to provide decision makers with actionable insights and access to multi-risk maps for the most in-danger stave churches (SCs) among the existing 28 churches at high spatial resolution to better understand, reduce and mitigate single- and multi-risk. In addition, the present contribution aims to provide decision makers with some information to face the exacerbation of the risk caused by the expected climate change.

Material and data collection started with the consultation of the available literature related to: (1) SCs' conservation status, (2) available methodologies suitable in multi-hazard approach and (3) vulnerability leading indicators to consider when dealing with the impact of natural hazards specifically on immovable cultural heritage.

The paper contributes to a better understanding of place-based vulnerability with local mapping dimension also considering future threats posed by climate change. The results highlight the danger at which the SCs of Røldal, in case of floods, and of Ringebu, Torpo and Øye, in case of landslide, may face and stress the urgency of increasing awareness and preparedness on these potential hazards.

The contribution for the first time aims to homogeneously collect and report all together existing spread information on architectural features, conservation status and geographical attributes for the whole group of SCs by accompanying this information with as much as possible complete 2D sections collection from existing drawings and novel 3D drawn sketches created for this contribution. Then the paper contributes to a better understanding of place-based vulnerability with local mapping dimension also considering future threats posed by climate change. Then it highlights the danger of floods and landslides at which the 28 SCs are subjected. Finally it reports how these risks will change under the ongoing impact of climate change.