Search results

The purpose of this paper is to investigate the vehicle-based sensor effect and pavement temperature on road condition assessment, as well as to compute a threshold value for the classification of pavement conditions.

Four sensors were placed on the vehicle’s control arms and one inside the vehicle to collect vibration acceleration data for analysis. The Analysis of Variance (ANOVA) tests were performed to diagnose the effect of the vehicle-based sensors’ placement in the field. To classify road conditions and identify pavement distress (point of interest), the probability distribution was applied based on the magnitude values of vibration data.

Results from ANOVA indicate that pavement sensing patterns from the sensors placed on the front control arms were statistically significant, and there is no difference between the sensors placed on the same side of the vehicle (e.g., left or right side). A reference threshold (i.e., 1.7 g) was computed from the distribution fitting method to classify road conditions and identify the road distress based on the magnitude values that combine all acceleration along three axes. In addition, the pavement temperature was found to be highly correlated with the sensing patterns, which is noteworthy for future projects.

The paper investigates the effect of pavement sensors’ placement in assessing road conditions, emphasizing the implications for future road condition assessment projects. A threshold value for classifying road conditions was proposed and applied in class assignments (I-17 highway projects).

Indoor air quality monitoring is extremely important in urban, industrial areas. Considering the devastating effect of declining quality of air in major part of the countries like India and China, it is highly recommended to monitor the quality of air which can help people with respiratory diseases, children and elderly people to take necessary precautions and stay safe at their homes. The purpose of this study is to detect air quality and perform predictions which could be part of smart home automation with the use of newer technology.

This study proposes an Internet-of-Things (IoT)-based air quality measurement, warning and prediction system for ambient assisted living. The proposed ambient assisted living system consists of low-cost air quality sensors and ESP32 controller with new generation embedded system architecture. It can detect Indoor Air Quality parameters like CO, PM2.5, NO2, O3, NH3, temperature, pressure, humidity, etc. The low cost sensor data are calibrated using machine learning techniques for performance improvement. The system has a novel prediction model, multiheaded convolutional neural networks-gated recurrent unit which can detect next hour pollution concentration. The model uses a transfer learning (TL) approach for prediction when the system is new and less data available for prediction. Any neighboring site data can be used to transfer knowledge for early predictions for the new system. It can have a mobile-based application which can send warning notifications to users if the Indoor Air Quality parameters exceed the specified threshold values. This is all required to take necessary measures against bad air quality.

The IoT-based system has implemented the TL framework, and the results of this study showed that the system works efficiently with performance improvement of 55.42% in RMSE scores for prediction at new target system with insufficient data.

This study demonstrates the implementation of an IoT system which uses low-cost sensors and deep learning model for predicting pollution concentration. The system is tackling the issues of the low-cost sensors for better performance. The novel approach of pretrained models and TL work very well at the new system having data insufficiency issues. This study contributes significantly with the usage of low-cost sensors, open-source advanced technology and performance improvement in prediction ability at new systems. Experimental results and findings are disclosed in this study. This will help install multiple new cost-effective monitoring stations in smart city for pollution forecasting.

The organizational digital transformation (ODT) in companies presents small and medium-sized enterprises (SMEs) – who remain at the beginning of this transformation – with the challenge of offering digital services based on sensor technologies. Against this backdrop, the present paper identifies ways SMEs can enable digital servitization through sensor technology and defines the possible scope of the organizational transformation process.

Around 21 semi-structured interviews were conducted with experts from different hierarchical levels across the German manufacturing SME ecosystem. Using the Gioia methodology, fields of action were identified by focusing on influencing factors and opportunities for developing these digital services to offer them successfully in the future.

The complexity of existing sensor offerings must be mastered, and employees' (data) understanding of the technology has increased. Knowledge gaps, which mainly relate to technical and organizational capabilities, must be overcome. The potential of sensor technology was considered on an individual, technical and organizational level. To enable the successful implementation of service offerings based on sensor technology, all relevant stakeholders in the ecosystem must network to facilitate shared value creation. This requires standardized technical and procedural adaptations and is an essential prerequisite for data mining.

Based on this study, current problem areas were analyzed, and potentials that create opportunities for offering digital sensor services to manufacturing SMEs were identified. The identified influencing factors form a conceptual framework that supports SMEs' future development of such services in a structured manner.

The aim of this paper is to identify some of the challenges that need to be addressed to accelerate the deployment and adoption of smart health technologies for ubiquitous healthcare access. The paper also explores how internet of things (IoT) and big data technologies can be combined with smart health to provide better healthcare solutions.

The authors reviewed the literature to identify the challenges which have slowed down the deployment and adoption of smart health.

The authors discussed how IoT and big data technologies can be integrated with smart health to address some of the challenges to improve health-care availability, access and costs.

The results of this paper will help health-care designers, professionals and researchers design better health-care information systems.

This paper is premised upon an analysis of 26 cities within the UK regarding their smart city projects. Each city was analyzed through news articles, reports and policy documents to ascertain the level of each city's development as a smart city. Each was coded by separating the projects into five types, which were ranked on a scale from 0 (no plans for use) to 5 (project type in use). The most common types are the provision of open data and the creation of business ecosystems as the primary driver of the smart city. However, many councils and enterprises proclaim smartness before the technology is actually in use, making it difficult to separate what is utilised and what is under development. Therefore, this paper further carried out an analysis of 20 cities and their intended plans to usher in the smart city, to observe the expected emergence of smart city technology. This was achieved by interrogating various roadmaps and policy documents produced by the respective cities. It was found that the most prevalent form of emergent smart city technology is the rollout of 5G and increased educational programmes alongside a proliferation of internet of things and electric vehicle usage.

Purpose – This study aims to design and build a wireless supervisory control and data acquisition (SCADA) system based on Protocol AX.25 with the aim of monitoring the performance of several parameters in Microhydro Power Plant (MHPP). This system can monitor several MHPP parameters such as voltage, current, frequency, and turbine rotation so that it can be accessed directly at one central location.

Design/Methodology/Approach – The design is done by taking into account the real parameters that exist in the MHPP. Some parameters that become the main object to see the performance of MHPP are voltage, current, frequency, and turbine rotation. The voltage generated by the MHPP must be adjusted to the voltage supplied by State Electricity Company to the consumer, including the phase used. The resulting stream should also be monitored for power to be adjusted to the turbine spin. The generator frequency is kept stable according to the standard frequency of the State Electricity Company generator.

Findings – The remote terminal unit (RTU) system has been simulated using 2 ACS712 current sensors, voltage sensor, zero crossing point, frequency sensor, and rotation sensor functionalized to monitor MHPP parameters. The AX.25 protocol has been applicable in the wireless SCADA network for monitoring the performance of MHPP by embedding in KYL-1020UA transceiver radio using the 433 MHz frequency and the audio frequency shift keying modulation system. Radio transmitter KYL-1020UA has been successfully simulated to send data from sensors to display on the computer through SCADA built applications. The data changes in the RTU section can be displayed properly on the graphic user interface in accordance with the existing display at the MHPP location.

Research Limitations/Implications – There are only two RTUs that will be connected to communicate, in this case MHPP-1 with callsign “RTU-001” and MHPP-2 with callsign “RTU-002.” While the existing devices in the data access section parameters MHPP as master station with callsign “MSSCADA” monitoring the performance of parameters sent from the RTU. There is no collision or error in data transmission. Baudrate is varied at 1,200 bps, 2,400 bps, 4,800 bps, and 9,600 bps for effective throughput calculation and AX.25 protocol efficiency. The transmission distance is varied at 100 m, 200 m, 300 m, and 500 m to see the bit error rate with baudrate 1,200 bps and 9,600 bps.

Practical Implications – This product is expected to be applied to several MHPP locations in Aceh Province so that its monitoring system is more centralized and efficient.

Originality/Value – This research if for the efficient monitoring of several MHPP located far apart and can be monitored in one central location so that operators do not have to be located at the plant site.

Heavy fog results in low visibility, which increases the probability and severity of traffic crashes, and fog warning system is conducive to the reduction of crashes by conveying warning messages to drivers. This paper aims at exploring the effects of dynamic message sign (DMS) of fog warning system on driver performance.

First, a testing platform was established based on driving simulator and driver performance data under DMS were collected. The experiment route was consisted of three different zones (i.e. warning zone, transition zone and heavy fog zone), and mean speed, mean acceleration, mean jerk in the whole zone, ending speed in the warning zone and transition zone, maximum deceleration rate and mean speed reduction proportion in the transition zone and heavy fog zone were selected. Next, the one-way analysis of variance was applied to test the significant difference between the metrics. Besides, drivers’ subjective perception was also considered.

The results indicated that DMS is beneficial to reduce speed before drivers enter the heavy fog zone. Besides, when drivers enter a heavy fog zone, DMS can reduce the tension of drivers and make drivers operate more smoothly.

This paper provides a comprehensive approach for evaluating the effectiveness of the warning system in adverse conditions based on the driving simulation test platform. The method can be extended to the evaluation of vehicle-to-infrastructure technology in other special scenarios.

The purpose of this paper is to analyse data literacy in the new Digital Competence Framework for Citizens (DigComp 2.2). Mid-2022 the Joint Research Centre of the European Commission published a new version of the DigComp (EC, 2022). This new version focusses more on the datafication of society and emerging technologies, such as artificial intelligence. This paper analyses how DigComp 2.2 defines data literacy and how the framework looks at this from a societal lens.

This study critically examines DigComp 2.2, using the data literacy competence model developed by the Knowledge Centre for Digital and Media Literacy Flanders-Belgium. The examples of knowledge, skills and attitudes focussing on data literacy (n = 84) are coded and mapped onto the data literacy competence model, which differentiates between using data and understanding data.

Data literacy is well-covered in the framework, but there is a stronger emphasis on understanding data rather than using data, for example, collecting data is only coded once. Thematically, DigComp 2.2 primarily focusses on security and privacy (31 codes), with less attention given to the societal impact of data, such as environmental impact or data fairness.

Given the datafication of society, data literacy has become increasingly important. DigComp is widely used across different disciplines and now integrates data literacy as a required competence for citizens. It is, thus, relevant to analyse its views on data literacy and emerging technologies, as it will have a strong impact on education in Europe.