Search results

Wage employees enter self-employment either directly or in a staged manner and may subsequently undertake multiple stints at self-employment. Extant research on the relationship between entry modes and the persistence and outcomes of self-employment is inconclusive. This study investigates the relationship between wage employees’ initial mode of entry into self-employment and the duration of the subsequent first two stints of self-employment.

This study used a matched longitudinal sample of 9,550 employees who became majority owners of incorporated firms from 2005 to 2016.

The findings demonstrate that the initial mode of entry into self-employment matters for the first two stints at self-employment. Staged entry into self-employment was associated with a shorter first stint and became insignificant for the second stint. Staged entry into self-employment was positively related to the odds of becoming self-employed for the second time in the same firm.

Using a comprehensive and reliable dataset, the paper shifts focus from the aggregated onward journey of novice entrepreneurs (survival as the outcome) to the duration of their self-employment stints. By doing so, the paper offers insights into the process of becoming self-employed and the patterns associated with success/failure in entrepreneurship associated with self-employment duration.

The purpose of this paper is to implement a closed loop regulated bidirectional DC to DC converter for an application in the electric power system of more electric aircraft. To provide a consistent power supply to all of the electronic loads in an aircraft at the desired voltage level, good efficiency and desired transient and steady-state response, a smart and affordable DC to DC converter architecture in closed loop mode is being designed and implemented.

The aircraft electric power system (EPS) uses a bidirectional half-bridge DC to DC converter to facilitate the electric power flow from the primary power source – an AC generator installed on the aircraft engine’s shaft – to the load as well as from the secondary power source – a lithium ion battery – to the load. Rechargeable lithium ion batteries are used because they allow the primary power source to continue recharging them whenever the aircraft engine is running smoothly and because, in the event that the aircraft engine becomes overloaded during takeoff or turbulence, the charged secondary power source can step in and supply the load.

A novel nonsingular terminal sliding mode voltage controller based on exponential reaching law is used to keep the load voltage constant under any of the aforementioned circumstances, and its performance is contrasted with a tuned PI controller on the basis of their respective transient and steady-state responses. The former gives a faster and better transient and steady-state response as compared to the latter.

This research gives a novel control scheme for incorporating an auxiliary power source, i.e. rechargeable battery, in more electric aircraft EPS. The battery is so implemented that it can get regeneratively charged when primary power supply is capable of handling an additional load, i.e. the battery. The charging and discharging of the battery is carried out in closed loop mode to ensure constant battery terminal voltage, constant battery current and constant load voltage as per the requirement. A novel sliding mode controller is used to improve transient and steady-state response of the system.

The need to enhance student support is evident in higher education (HE) curricula. In addition to the complications created by the COVID-19 pandemic, the current strategies used in academia are criticised for their lack of appropriate student support in HE. The study focused on the themes under Section 4 of the National Student Survey (NSS): availability to contact tutors, receiving good advice and guidance and availability of good advice. The study aimed to provide recommendations for enhancing academic support by developing drivers that need implementation during course delivery.

A documental analysis and a qualitative survey were adopted for this study. A documental analysis of 334 mid-module reviews (MMRs) from levels three to six students in the built environment (BE) discipline. Critical themes identified from the MMRs were fed forward in developing a questionnaire for academics. A sample of 23 academics, including a Head of school, a Principal lecturer, Subject leads and Lecturers, participated in the questionnaire survey. Content analysis is adopted through questionnaire data to develop drivers to enhance academic support in BE. These drivers are then modelled by interpretive structural modelling (ISM) to identify their correlation to NSS Section 4 themes. A level partition analysis establishes how influential they are in enhancing academic support.

The study identified nine drivers, where two drivers were categorised as fundamental, two as significant, four as important, and one insignificant in enhancing academic support in HE. Module leaders’/tutors’ improving awareness and detailing how academic support is provided were identified as fundamental. Differentiating roles in giving advice and the importance of one-to-one meetings were identified as significant. A level partitioning diagram was developed from the nine drivers to illustrate how these drivers need to be implemented to promote the best practices in academic support in HE.

The identified drivers and their categories can be used to set prioritised guidelines for academics and other educational institutions to improve students’ overall satisfaction.

Novelty from the study will be the developed drivers and the level partitioning diagram to assist academics and academic institutions in successfully integrating academic support into HE curricula.

The automotive industry appears to overcome much of its obstacles, despite the constant struggle facing COVID-19. The pandemic has resulted in significant improvements in the habits and conduct of consumers. There is an increased preference for personal mobility. In this dynamic environment with unexpected changes and high market rivalry, automotive supply chains focus more on executing responsive strategies with minimum costs. This paper aims to identify and model the drivers to the responsiveness of automotive supply chain.

Seventeen drivers for supply chain responsiveness have been identified from the extensive literature, expert interview. An integrated methodology of fuzzy decision-making trial and evaluation laboratory–interpretive structural modelling (DEMATEL–ISM) is developed to establish the interrelationship between the drivers. The cause–effect relationship between the drivers was obtained through fuzzy DEMATEL technique, and a hierarchical structure of the drivers was developed using the ISM technique.

The result of the integrated methodology revealed that strategic decision-making of management, accurate forecasting of demand, advanced manufacturing system in the organisation and data integration tools are the critical drivers.

This study has conceptual and analytical limitations. In this study, a limited number of drivers are examined for supply chain responsiveness. Further research may examine the role of other key performance indicators in the broad field of responsiveness in the automotive supply chain or other industry sectors. Future study can uncover the interrelationships and relative relevance of indicators using advanced multi-criteria decision-making methodologies.

The authors proposed an integrated methodology that will be benefitted to the supply chain practitioners and automotive manufacturers to develop management strategies to improve responsiveness. This study further helps to compare the responsiveness of the supply chain between various automotive manufacturers.

This study aims to examine the impact of some real variables such as real effective exchange rates, real mortgage rates, real money supply, real construction cost index and housing sales on the real housing prices.

This study uses a nonlinear autoregressive distributed lag (NARDL) model in the monthly period of 2010:1–2021:10.

The real effective exchange rate has a positive and symmetric effect. The decreasing effect of negative changes in real money supply on real housing prices is higher than the increasing effect of positive changes. Only positive changes in the real construction cost index have an increasing and statistically significant effect on real house prices, while only negative changes in housing sales have a small negative sign and a small increasing effect on housing prices. The fact that the positive and negative changes in real mortgage rates are negative and positive, respectively, indicates that both have a reducing effect on real housing prices.

This study suggests the first NARDL model that investigates the asymmetric effects on real housing prices instead of nominal housing prices for Turkey. In addition, the study is the first, to the best of the authors’ knowledge, to examine the effects of the five real variables on real housing prices.

This paper undertakes a structured literature review to analyse the literature on performance management and measurement (PMM) in universities over the last four decades. Over that time, PMM has emerged as an influential force in universities that impacts their operations and redefines their identity.

A structured literature review approach was used to analyse a sample of articles on PMM research from a broad range of disciplines over four decades. This was undertaken to understand the impacts of PMM practices on universities, highlight changes over time and point to avenues for future research.

The analysis highlights the fact that research on PMM in universities has grown significantly over the 40 years studied. We provide an overview of published articles over four decades regarding content, themes, theories, methods and impacts. We provide an empirical basis for discussing past, present and future university PMM research. The future research avenues offer multiple provocations for scholars and policymakers, for instance, PMM implementation strategies and relationships with various government programs and external evaluation and the role of different actors, particularly academics, in shaping PMM systems.

Unlike a traditional literature review, the structured literature review method can develop insights into how the field has changed over time and highlight possible future research. The sample for this literature review differs from previous reviews in covering a broad range of disciplines, including accounting.

This study aims to elucidate institutional analysis as an effective approach to investigating and designing the multilevel policymaking system of online social networks (OSN) for achieving a participatory model.

The institutional mapping approach has been used to analyze Iran’s OSN multilevel policymaking system. A combination of two matrices, including institutions-institutions and institutions-functions, was used to perform the institutional mapping. Two main steps were taken to draw the mentioned matrices. First, a review of related studies in Iran’s OSN policymaking system was conducted and the policy functions mentioned in these studies were identified and categorized using the meta-synthesis. Second, based on analyzing two policy documents of Iran’s OSN, institutions and their interactions were identified and policy functions were allocated to institutions.

Based on the results, the most important policy functions in the current OSN policymaking system in Iran are support, regulatory, monitoring and evaluation, business environment development, culture building and promotion, organizing licenses and permissions, policymaking and legislation. Also, the results show that there are shortcomings in this system, some of the most important of which are lack of transparency in regulatory, little work in culture building and promotion, neglect of the training of specialized human resources and research and development, slow development of the business environment and neglecting the role of nongovernmental organizations in policymaking.

By examining and analyzing how different institutions operate within a multilevel policymaking system, the policymaking process and its overall effectiveness can be enhanced. This analysis helps identify any inconsistencies, overlaps or conflicts in the roles and policies of these institutions, leading to a better understanding of how a multilevel policymaking system is organized.

Polymer laser powder bed fusion (PBF-LB/P) is an additive manufacturing technology that is sustainable due to the possibility of recycling the powder multiple times and allowing the fabrication of gears without the aid of support structures and subsequent assembly. However, there are constraints in the process that negatively affect its adoption compared to other additive technologies such as material extrusion to produce gears. This study aims to demonstrate that it is possible to overcome the problems due to the physics of the process to produce accurate mechanism.

Technological aspects such as orientation, wheel-shaft thicknesses and degree of powder recycling were examined. Furthermore, the evolving tooth profile was considered as a design parameter to provide a manufacturability map of gear-based mechanisms.

Results show that there are some differences in the functioning of the gear depending on the type of powder used, 100% virgin or 50% virgin and 50% recycled for five cycles. The application of a groove on a gear produced with 100% virgin powder allows the mechanism to be easily unlocked regardless of the orientation and wheel-shaft thicknesses. The application of a specific evolutionary profile independent of the diameter of the reference circle on vertically oriented gears guarantees rotation continuity while preserving the functionality of the assembled mechanism.

In the literature, there are various studies on material aging and reuse in the PBF-LB/P process, mainly focused on the powder deterioration mechanism, powder fluidity, microstructure and mechanical properties of the parts and process parameters. This study, instead, was focused on the functioning of gears, which represent one of the applications in which this technology can have great success, by analyzing the two main effects that can compromise it: recycled powder and vertical orientation during construction.

This paper aims to investigate how emerging market multinational enterprises (EMNEs) are integrating and expanding into other emerging market host countries, focusing on Chinese mining companies in Peru.

Adopting a qualitative approach, an in-depth analysis of two Chinese state-owned enterprises’ strategies was conducted, building on stakeholder theory and the business ecosystem perspective.

This study reveals a reliance on high-level political lobbying rather than localized engagement strategies. However, findings point to increasing grassroots resistance among local stakeholders, undermining EMNEs’ bargaining power.

This paper argues for a paradigm shift toward inclusive, cooperative “translocal governance” approaches as empowered communities gain voice. Key contributions include advancing theoretical understanding of changing stakeholder relationships and power configurations in emerging countries, underscoring the rising significance of microlevel sociocultural embeddedness for MNE success and highlighting practical imperatives for EMNEs to embark on rapid localization strategies in Latin America. By elucidating multilayered integration realities in Peru, this interdisciplinary study yields contextualized insights and enriches perspective on the conditions and pathways for EMNEs to build sustainability in Global South emerging market environments.

The purpose of this study is to advance a novel evaluation index system and evaluation approach for ability of older adults in China.

This study constructed a comprehensive older adult ability evaluation index system with 4 primary indicators and 17 secondary indicators. Grey clustering analysis and entropy weight method are combined into a robust evaluation model for the ability of older adults.

The result demonstrates that the proposed grey clustering model is readily available to calculate the disability level of elderly individuals. The constructed index system more comprehensively considers all aspects of the disability of the elderly.

This study provides a quantitative method and a more reasonable index system for the determination of the disability level of the elderly.