Search results

The purpose of this paper is to investigate the applicability of a direct current (DC) hysteresis measurement on power transformer terminals for the subsequent hysteresis model parametrization in transformer grey box topology models.

Two transformer topology models with two different hysteresis models are used together with a DC hysteresis measurement via the power transformer terminals to parameterize the hysteresis models by means of an optimization. The calculated current waveform with the derived model in the transformer no-load condition is compared to the measured no-load current waveforms to validate the model.

The proposed DC hysteresis measurement via the power transformer terminals is suitable to parametrize two hysteresis models implemented in transformer topology models to calculate the no-load current waveforms.

Different approaches for the measurement and utilization of transformer terminal measurements for the hysteresis model parametrization are discussed in literature. The transformer topology models, derived with the presented approach, are able to reproduce the transformer no-load current waveform with acceptable accuracy.

Auxiliary power system is an indispensable part of the train; the auxiliary systems of both electric locomotives and EMUs mainly are powered by one of the two ways, which are either from auxiliary windings of traction transformers or from DC-link voltage of traction converters. Powered by DC-link voltage of traction converters, the auxiliary systems were maintained of uninterruptable power supply with energy from electric braking. Meanwhile, powered by traction transformers, the auxiliary systems were always out of power while passing the neutral section of power supply grid and control system is powered by battery at this time.

Uninterrupted power supply of auxiliary power system powered by auxiliary winding of traction transformer was studied. Failure reasons why previous solutions cannot be realized are analyzed. An uninterruptable power supply scheme for the auxiliary systems powered by auxiliary windings of traction transformers is proposed in this paper. The validity of the proposed scheme is verified by simulation and experimental results and on-site operation of an upgraded HXD3C type locomotive. This scheme is attractive for upgrading practical locomotives with the auxiliary systems powered by auxiliary windings of traction transformers.

This scheme regenerates braking power supplied to auxiliary windings of traction transformers while a locomotive runs in the neutral section of the power supply grid. Control objectives of uninterrupted power supply technology are proposed, which are no overvoltage, no overcurrent and uninterrupted power supply.

The control strategies of the scheme ensure both overvoltage free and inrush current free when a locomotive enters or leaves the neutral section. Furthermore, this scheme is cost low by employing updated control strategy of software and add both the two current sensors and two connection wires of hardware.

This paper aims to propose a method of parametrizing topological transformer model at high flux densities in the core.

The approach proposed is based on terminal voltages and currents measured in a special purpose saturation test whose data are combined with typical saturation curves of grain-oriented electrical steels; the modeling is carried out in the ATPDraw program.

The authors corroborate experimentally the necessity of dividing the zero sequence impedance between all transformer phases and propose a method of the individual representation of the legs and yokes. This eliminates the use of nonexistent leakage inductances of primary and secondary windings.

The presented modeling approach can be used for predicting inrush current events and in the evaluation of the impact caused by geomagnetically induced currents (GICs).

The proposed approach is completely original and will contribute to a better understanding of the transients occurring in a transformer under abnormal conditions, such as inrush current events and GICs.

The purpose of this paper is to present a methodology for calculating eddy current losses in the core of a single-phase power voltage transformer, which, unlike a standard power transformer, has an open-type core (I-type core). In those apparatus, reduction of core losses is achieved by using a multipart open-type core that is created by merging a larger number of leaner cores.

3D FEM approach for calculation of eddy current losses in open-type cores based on a weak AλA formulation is presented. Method in which redundant degrees of freedom are eliminated is shown. This enables faster convergence of the simulation. The results are benchmarked using simulations with standard AVA formulation.

Results using weak AλA formulation with elimination of redundant degrees of freedom are in agreement with both simulation using only weak AλA formulation and with simulation based on AVA formulation.

The presented methodology is valid in linear cases, whereas the nonlinear case will be part of future work.

Presented procedure can be used for the optimization when designing the open-type core of apparatus like power voltage transformers.

The presented method is specifically adapted for calculating eddy currents in the open-type core. The method is based on a weak formulation for the magnetic vector potential A and the current vector potential λ, incorporating numerical homogenization and a straightforward elimination of redundant degrees of freedom, resulting in faster convergence of the simulation.

The article discusses the current relevance of artificial intelligence (AI) in research and how AI improves various research methods. This article focuses on the practical case study of systematic literature reviews (SLRs) to provide a guideline for employing AI in the process.

Researchers no longer require technical skills to use AI in their research. The recent discussion about using Chat Generative Pre-trained Transformer (GPT), a chatbot by OpenAI, has reached the academic world and fueled heated debates about the future of academic research. Nevertheless, as the saying goes, AI will not replace our job; a human being using AI will. This editorial aims to provide an overview of the current state of using AI in research, highlighting recent trends and developments in the field.

The main result is guidelines for the use of AI in the scientific research process. The guidelines were developed for the literature review case but the authors believe the instructions provided can be adjusted to many fields of research, including but not limited to quantitative research, data qualification, research on unstructured data, qualitative data and even on many support functions and repetitive tasks.

AI already has the potential to make researchers’ work faster, more reliable and more convenient. The authors highlight the advantages and limitations of AI in the current time, which should be present in any research utilizing AI. Advantages include objectivity and repeatability in research processes that currently are subject to human error. The most substantial disadvantages lie in the architecture of current general-purpose models, which understanding is essential for using them in research. The authors will describe the most critical shortcomings without going into technical detail and suggest how to work with the shortcomings daily.

The purpose of this paper is to present the freely available finite element simulation software Pyrit.

In a first step, the design principles and the objective of the software project are defined. Then, the software’s structure is established: The software is organized in packages for which an overview is given. The structure is based on the typical steps of a simulation workflow, i.e., problem definition, problem-solving and post-processing. State-of-the-art software engineering principles are applied to ensure a high code quality at all times. Finally, the modeling and simulation workflow of Pyrit is demonstrated by three examples.

Pyrit is a field simulation software based on the finite element method written in Python to solve coupled systems of partial differential equations. It is designed as a modular software that is easily modifiable and extendable. The framework can, therefore, be adapted to various activities, i.e., research, education and industry collaboration.

The focus of Pyrit are static and quasistatic electromagnetic problems as well as (coupled) heat conduction problems. It allows for both time domain and frequency domain simulations.

In research, problem-specific modifications and direct access to the source code of simulation tools are essential. With Pyrit, the authors present a computationally efficient and platform-independent simulation software for various electromagnetic and thermal field problems.

The purpose of this paper is to show how the EStra-Many method works on optimization problems characterized by high-dimensionality of the objective space. Moreover, a comparison with a more classical approach (a constrained bi-objective problem solved by means of NSGA-II) is done.

The six reactances of a compensation network (CN) for a wireless power transfer system (WPTS) are synthesized by means of an automated optimal design. In particular, an evolutionary algorithm EStra-Many coupled with a sorting strategy has been applied to an optimization problem with four objective functions (OFs). To assess the obtained results, a classical genetic algorithm NSGA-II has been run on a bi-objective problem, constrained by two functions, and the solutions have been analyzed and compared with the ones obtained by EStra-Many.

The proposed EStra-Many method identified a solution (CN synthesis) that enhances the WPTS, considering all the four OFs. In particular, to assess the synthesized CN, the Bode diagram of the frequency response and a circuital simulation were evaluated a posteriori; they showed good performance of the CN, with smooth response and without unwanted oscillations when fed by a square wave signal with offset. The EStra-Many method has been able to find a good solution among all the feasible solutions, showing potentiality also for other fields of research, in fact, a solution nondominated with respect to the starting point has been identified. From the methodological viewpoint, the main finding is a new formulation of the many-objective optimization problem based on the concept of degree of conflict, which gives rise to an implementation free from hierarchical weights.

The new approach EStra-Many used in this paper showed to properly find an optimal solution, trading-off multiple objectives. The compensation network so synthesized by the proposed method showed good properties in terms of frequency response and robustness. The proposed method, able to deal effectively with four OFs, could be applied to solve problems with a higher number of OFs in a variety of applications because of its generality.

This paper aims to study whether international niche market leaders (INMLs) gained their leading position as early mover or diligent follower, and assess whether they leveraged hard or soft forms of technological, supply pre-emption and customer lock-in advantage mechanisms.

Empirical material stems from qualitative and quantitative data on a sample of 20 niche companies from the Basque Country (Spain) that operate in business to business markets.

The sample predominantly followed an early entrant strategy and applied soft measures to reach niche market leadership.

Findings imply that early entering fosters conquering leadership in niche markets, that pioneer advantage is easier to sustain in niches than in mainstream markets, and that soft measures are more effective in niche markets than in larger markets. A limitation to our findings is that they follow from explorative research on a sample of firms from a reduced geographic setting.

Hidden champions and INMLs can be important sources of technological progress and economic value for the localities that host them. Therefore, despite their traditional low profile and the fact that they are not always the largest firms around, policymakers may want to pay more attention to this type of companies.

Tot he best of the authors’ knowledge, this is the first paper to research entry timing and its outcome for market leadership with regard to niche players or hidden champions-type of firms. It introduces an original taxonomy to operationalize and distinguish between hard and soft measures to leverage advantage mechanisms related to market entry timing.

The traction cable is paralleled with the existing traction network of electrified railway through transverse connecting line to form the scheme of long distance power supply for the traction network. This paper aims to study the scheme composition and power supply distance (PSD) of the scheme.

Based on the structure of parallel traction network (referred to as “cable traction network (CTN)”), the power supply modes (PSMs) are divided into cable + direct PSM and cable + autotransformer (AT) PSM (including Japanese mode, French mode and new mode). Taking cable + Japanese AT PSM as an example, the scheme of long distance power supply for CTN under the PSMs of co-phase and out-of-phase power supply are designed. On the basis of establishing the equivalent circuit model and the chain circuit model of CTN, taking the train working voltage as the constraint condition, and based on the power flow calculation of multiple train loads, the calculation formula and process for determining the PSD of CTN are given. The impedance and PSD of CTN under the cable + AT PSM are simulated and analyzed, and a certain line is taken as an example to compare the scheme design.

Results show that the equivalent impedance of CTN under the cable + AT PSM is smaller, and the PSD is about 2.5 times of that under the AT PSM, which can effectively increase the PSD and the flexibility of external power supply location.

The research content can effectively improve the PSD of traction power supply system and has important reference value for the engineering application of the scheme.

This work introduces an efficient and accurate technique to solve the eddy current problem in laminated iron cores considering vector hysteresis.

The mixed multiscale finite element method based on the based on the T,Φ-Φ formulation, with the current vector potential T and the magnetic scalar potential Φ allows the laminated core to be modelled as a single homogeneous block. This means that the individual sheets do not have to be resolved, which saves a lot of computing time and reduces the demands on the computer system enormously.

As a representative numerical example, a single-phase transformer with 4, 20 and 184 sheets is simulated with great success. The eddy current losses of the simulation using the standard finite element method and the simulation using the mixed multiscale finite element method agree very well and the required simulation time is tremendously reduced.

The vector Preisach model is used to account for vector hysteresis and is integrated into the mixed multiscale finite element method for the first time.