Search results

This paper aims to analyze the frequency characteristics of wireless power transfer (WPT) systems with relay resonators in terms of the power delivered to the load and system efficiency. Based on the analytical results, system parameters can be optimized to achieve maximum power transfer and higher system efficiency.

Based on Kirchhoff’s voltage law equations, WPT systems with relay resonators are described by the coupled linear second-order differential equations. Splitting frequencies are estimated by using the matrix theory. In addition, critical coupling conditions are demonstrated based on discriminant analysis.

It was found that multi-maximum values exist for the power delivered to the load and total system efficiency owing to multiple eigenfrequencies of the system. Also, frequency conditions of maximum power transfer and system efficiency, as well as their critical coupling conditions, were quantitatively estimated.

During our analytical process, we assume that quality factors of resonators in the system are high and the crossing coupling between resonators is negligible.

In previous works, the exact analysis of frequency characteristics is limited to WPT systems with two resonators. The appealing feature of this work lies in its ability to present a simplified analytical method with negligible approximation errors for WPT systems with relay resonators.

The purpose of this paper is to study the wireless power transfer (WPT) system that always achieves the maximum output power at a fixed angular frequency using the dynamic impedance compensation and also the maximum transfer efficiency.

An efficient topology of the WPT system is proposed which states that the functions of the relay are transformed into the functions of the compensator in the three-coil WPT system.

Increasing the ratio of the frequency detuning factor of the compensator relative to the frequency detuning factor of the compensator also causes the curves of the normalized output power and the transfer efficiency to move toward the high frequency direction.

The scheme of the dynamic compensation for the WPT using a compensator is convenient to obtain the dynamic impedance compensation by adding or removing the capacitances or inductances from the compensator.

The functions of the relay are transformed into the functions of the compensator in the three-coil WPT system.

The impedance compensation approaches have been adopted to achieve the maximum output power and transfer efficiency in many magnetic coupling resonance wireless power transfer projects. However, it remains a challenge to obtain the constant output power and transfer efficiency in a fixed-frequency mode during variations in transfer distance and orientation of the coils. In this paper, using two series transmitting coils to achieve the constant output power and transfer efficiency is used.

First, the circuit model is established and transfer characteristics are studied. Second, using the two series transmitting coils to achieve the constant output power and transfer efficiency is investigated. Finally, the experimental system is designed; it can optimize the transfer performances by itself; the constant output power and transfer efficiency are achieved in the fixed-frequency mode.

When the receiving coil moves between the two series transmitting coils, the tolerance of the output power and transfer efficiency is less than 5 per cent.

When a receiving coil is placed between the two series transmitting coils, there are space limits. The receiving coil only shifts between the two transmitting coils.

However, the rail guide vehicle may achieve constant output power and transfer efficiency when it moves on the rail guide. So, this topology may provide a practical solution.

In this research, the three-coil MCR-WPT system including two series transmitting coils is presented. In a fixed-frequency mode, the constant output power and transfer efficiency is achieved in experiments during variations in transfer distance and orientation of the coils. The fluctuation of the output power and transfer efficiency is less than 5 per cent.

This paper aims to find an approach that achieves constant output power and transfer efficiency in an open space, such as charging pads.

In this study, a topology of the five-coil system including two transmitting coils is presented. Also, in a fixed-frequency mode and an open space, this study focuses on the two transmitting coils to achieve the uniform magnetic field and ultimately, attain the constant output power and transfer efficiency.

In a fixed-frequency mode and an open space, the constant output power and transfer efficiency is then achieved in experiments by inserting the relay loop into the uniform magnetic field.

An approach that achieves constant output power and transfer efficiency in an open space. The topology of the five-coil magnetically coupled resonant-wireless power transfer (MCR-WPT) system shows prospective value for various applications, which could be used at designing of wireless battery charger dedicated for cars or mobile phones.

By comparing the simulation and experimental results, the topology can be optimized in the transmission performance by itself. By doing so, the constant output power and transfer ef?ciency are achieved in the constant frequency mode.

This paper aims to develop mathematical models of variously compensated wireless energy transfer (WET) systems. Attention is primarily paid to the derivation of the most important energy transfer characteristics such as efficiency and amount of transferred power. This paper discusses the main advantages and disadvantages of various compensation techniques to show their possible application areas. On the basis of these results, a designer will be able to quickly identify which compensation type suites as the best solution to fulfill a given system’s requirements.

First, the current state in the field of mathematical modeling of WET systems is introduced. Next, the non-resonant magnetic-coupled circuit together with four most common resonant magnetic-coupled circuits is analyzed. The equivalent circuit models using loop currents methodology is applied to the analyses. The proposed methodology is experimentally verified by the laboratory measurement of selected circuit topology. The main contribution of the proposed methodology lies in its quick applicability on more complicated or extended systems while keeping a relatively good match with the real system’s behavior.

The authors have presented the usage of a simple and accurate methodology for investigating variously compensated WET systems. Electrical engineers who require effective and powerful tools for the identification of basic WET systems properties will find this methodology to be of extensive help.

The analyses consider only the sinusoidal type of supply voltage; so, it is valid mainly for the close range of the resonant state. Nonlinearities cannot be taken into account.

This research may be applied in the field of WET systems.

Research in the area of power electronic systems, which provides a clear and straightforward procedure for WET system identification, will be helpful to most practical technicians who are not well versed in areas of physical-based phenomena.

This paper aims to present a fast and modular framework implementation for the thermal analyses of foreign metal objects in the context of wireless power transfer (WPT) to evaluate whether they pose a hazard to the system. This framework serves as a decision-making tool for determining the necessity of foreign object detection in certain applications and at certain transmitted power levels.

To assess the necessity of implementing foreign object detection, the considered WPT system is modeled, and Arnoldi-Krylov-based model order reduction is applied to generate separate reduced models of the ground and vehicle modules of the WPT system. This enables interoperable evaluations to be conducted. Further discussion on the implementation details of the system-level simulations used to evaluate the electrical and thermal characteristics is provided. The resulting modular implementation allows for efficient evaluation of the thermal behavior of the wireless charging system at various transferred power levels and under various boundary conditions.

Based on the transferred power level, the WPT model, the relative positioning between the vehicle and the charging pad and the charging time, it may be necessary to divide the area of the charging pad into multiple regions for the purpose of implementing foreign object detection.

While the tools and fundamentals of thermal analysis are widely known and used, their application to high-power WPT systems for electric vehicles has not yet been thoroughly discussed in this form in the literature. The approach presented in this paper is not limited to the specific WPT model discussed but rather is directly applicable to other WPT models as well.

The purpose of this paper is to present a monitoring method for a three-coil wireless power transfer (WPT) system, which consists of a transmitting coil (Tx), a relay coil and a movable receiving coil (Rx). Both an ideal resistance and a rectifier bridge load are taken into account.

From the perspective of fundamental component, the equivalent impedance of a rectifier bridge load is well analyzed. On the basis of the circuit model of a three-coil WPT, estimation equations of the variable mutual inductances and load condition are deduced. Multi-frequency input impedance obtained by frequency scans combined with the Newton-Raphson method are used to obtain solutions.

Experimental results indicate that the estimated parameter values are close to each other when different sets of source frequencies are applied. When compared with simulation results, these estimated parameters including both mutual inductances and load resistances are found to be accurate.

Using only the information of input side, the proposed algorithm can estimate the mutual inductances and load resistance regardless of the Rx positions. Estimation is feasible for the system with a rectifier bridge load. The estimated analysis will serve as a key step in load power stabilization for WPT systems.

To simplify the circuit design and control complexity of the magnetic coupling resonant wireless charging system, the radio energy transmission constant current and constant voltage charging is realized.

The purpose of this study is to simplify the circuit design and control complexity of the magnetic coupling resonance wireless charging system, in order to achieve constant current and constant voltage charging for wireless energy transmission. First, the principle of LCC/S-S compensation structure is analyzed, and the equivalent mathematical model is established; then, the system characteristics under constant current and constant voltage mode are analyzed, and the design method of system parameters is given; finally, a simulation and experimental system is built to verify the correctness and feasibility of the theoretical analysis.

The results show that the proposed hybrid topology can achieve a constant current output of 2 A and a constant voltage output of 30 V under variable load conditions, and effectively suppress the current distortion problem under light load conditions. The waveform distortion rate of the inverter current is reduced from 33.97% to 10.45%.

By changing the high-order impedance characteristics of the compensation structure, the distortion of the current waveform under light load is suppressed, and the overall stability and efficiency of the system are improved.

Consider the mutual coupling between loads, the purpose of this paper is to study the total transmission efficiency based on different load coil positions relative to the charging platform, to provide the theoretical basis for the design and parameter optimization of one-to-multiple wireless charging platform.

Based on the dual-load series-resonant wireless power transfer system, the expression of system efficiency and its calculation model is achieved using the equivalent circuit theory. Finally, a 96 kHz magnetic resonance wireless power transmission test platform is built up to verify the theoretical analysis given in this paper.

For the completely resonant circuit, the transmission efficiency can be improved by increasing the transmitter-receiver coupling and reducing the coupling between receivers. The total transmission efficiency achieves its lowest value when two loads are with equal competitive capability.

Through the simulation analysis of efficiency formula, the selection principle of impact factors can be applied to the optimization analysis of the transmission efficiency.

The purpose of this paper is to present a family of robust metasurface-oriented wireless power transfer systems with improved efficiency and size compactness. The effect of geometric and structural features on the overall efficiency and miniaturisation is elaborately studied, while the presence of substrate losses is, also, considered. Moreover, to further enhance the performance, possible means for reducing the operating frequency, without comprising the unit-cell size, are proposed.

The key element of the design technique is the edge-coupled split-ring resonators patterned in various metasurface configurations and optimally placed to increase the total efficiency. To this goal, a rigorous three-dimensional algorithm, launching a new high-order prism macroelement, is developed in this paper for the fast evaluation of the required quantities. The featured scheme can host diverse approximation orders, while it is drastically more economical than existing methods. Hence, the demanding wireless power transfer systems are precisely modelled via reduced degrees of freedom, without the need to conduct large-scale simulations.

Numerical results, compared with measured data from fabricated prototypes, validate the design methodology and prove its competence to provide enhanced metasurface wireless power transfer systems. An assortment of optimized 3 x 3 and 5 x 5 metamaterial setups is investigated, and interesting deductions, regarding the impact of the inter-element gaps, the distance between the transmitting and receiving components and the substrate losses, are derived. Also, the proposed vector macroelement technique overwhelms typical implementations in terms of computational burden, particularly when combined with the relevant commercial software packages.

Systematic design of advanced real-world wireless power transfer structures through optimally selected metasurfaces with fully controllable electromagnetic properties is presented. The analysis is performed by means of a rapid prism macroelement methodology, which leads to very confined meshes, accurate results and significantly reduced overhead. The selected metamaterial resonators are found to be very flexible and reconfigurable, even in the case of large substrate conductivity losses, whereas their contribution to the system’s total efficiency is decisive.