Search results

In many of today’s manufacturing industries, such as automobile, aerospace, defence, die and mould making, medical and electrical discharge machining (EDM) has emerged as an effective material removal process. In this process, a series of discontinuous electric discharges is used for removing material from the workpiece in the form of craters generating a replica of the tool into the workpiece in a dielectric environment. Appropriate selection of the tool electrode material and combination of input parameters is an important requirement for performance enhancement of an EDM process. This paper aims to optimize an EDM process using single-valued neutrosophic grey relational analysis using Cu-multi-walled carbon nanotube (Cu-MWCNT) composite tool electrode.

This paper proposes the application of grey relational analysis (GRA) in a single-valued neutrosophic fuzzy environment to identify the optimal parametric intermix of an EDM process while considering Cu-MWCNT composite as the tool electrode material. Based on Taguchi’s L9 orthogonal array, nine experiments are conducted at varying combinations of four EDM parameters, i.e. pulse-on time, duty factor, discharge current and gap voltage, with subsequent measurement of two responses, i.e. material removal rate (MRR) and tool wear rate (TWR). The electrodeposition process is used to fabricate the Cu-MWCNT composite tool.

It is noticed that both the responses would be simultaneously optimized at higher levels of pulse-on time (38 µs) and duty factor (8), moderate level of discharge current (5 A) and lower level of gap voltage (30 V). During bi-objective optimization (maximization of MRR and minimization of TWR) of the said EDM process, the achieved values of MRR and TWR are 243.74 mm³/min and 0.001034 g/min, respectively.

Keeping in mind the type of response under consideration, their measured values for each of the EDM experiments are expressed in terms of linguistic variables which are subsequently converted into single-valued neutrosophic numbers. Integration of GRA with single-valued neutrosophic sets would help in optimizing the said EDM process with the Cu-MWCNT composite tool while simultaneously considering truth-membership, indeterminacy membership and falsity-membership degrees in a human-centric uncertain decision-making environment.

Fluid flows through rotatory disks are encountered in industrial and practical engineering processes, such as computer storage devices, gas turbine rotators, rotating machinery, air cleaning machines, etc. The primary purpose of this research is to examine the combined aspects of variable electrical conductivity, thermal radiation, Soret and Dufour effects on a magnetohydrodynamic Maxwell single-walled carbon nanotubes–graphene oxide–multi-walled carbon nanotubes–copper (SWCNT–GO–MWCNT–Cu)/sodium alginate tetra-hybrid nanofluid flow through a stretchable rotatory disk.

The modeled administrative equations of the present flow problem are converted to a non-dimensional system of ordinary differential equations by applying suitable similarity conversion and then solved numerically by implementing the bvp4c method. The impressions of noteworthy dimensionless parameters on velocity, temperature, concentration distributions, Nusselt number, skin friction and Sherwood number are reported via graphs and tables.

The authors figured out that the developed values of the rotation parameter diminish the temperature but enhance both the radial and angular velocities. Further, the mass and heat transmission rates are better for tetra-hybrid nanofluids than for ternary and hybrid nanofluids.

The present study emphasizes a special type of fluid called the tetra-hybrid nanofluid. The existing literature has not discussed the Maxwell tetra hybrid nanofluid flow through a stretchable rotatory disk with variable electrical conductivity. Besides, the novel aspects of magnetohydrodynamics, thermal radiation, Soret and Dufour effects are also incorporated into the present flow problem.

The purpose of this study is to investigate the pulsating flow in a three-dimensional channel. Channel flow is laminar and turbulent. After validation, the effect of different channel cross-sectional geometries (circular, hexagonal and triangular) with the pulsating flow are investigated. For this purpose, the alumina nanofluid was considered as a working fluid with different volume percentages (0 per cent [pure water], 3 per cent and 5 per cent).

In this study, the pulsatile flow was investigated in a three-dimensional channel. Channel flow is laminar and turbulent.

The results show that the fluid temperature decreases by increasing the volume percentage of particles of Al₂O₃; this is because of the fact that the input energy through the wall boundary is a constant value and indicates that with increasing the volume percentage, the fluid can save more energy at a constant temperature. And by adding Al₂O₃ nanofluid, thermal performance improves in channels, but it should be considered that the use of nanofluid causes a pressure drop in the channel.

Alumina/water nanofluid with the pulsating flow was investigated and compared in three different cross-sectional channel geometries (circular, hexagonal and triangular). The effect of different volume percentages (0 per cent [pure water], 3 per cent and 5 per cent) of Al₂O₃ nanofluid on temperature, velocity and pressure are studied.

The purpose of this paper is to investigate thermohydraulic characteristics of turbulent flow of water (4,000 = Re = 10,000) in a rectangular channel equipped with perforated chevron plat-fin (PCPF) with different vortex generators (VGs) shapes.

First, three general shapes of VGs including rectangular, triangular and half circle, are compared to each other. Then, the various shapes of rectangular VGs, (horizontal, vertical and square) and triangular VGs, (forward, backward and symmetric) are evaluated. To comprehensively evaluate the thermohydraulic performance of the PCPF with various VG shapes, the relationship between the Colburn factor and the friction factor (j/f) is presented, then a performance index (η) is applied using these factors.

Results show that the enhanced models of the PCPF, which are equipped with VGs, have higher values of j/f ratio and η as compared with the reference model (R). Further, the half-circle VG with the lowest pressure drop values (about 2.4% and 4.9%, averagely as compared with the S and ST vortex generators), shows the highest thermohydraulic performance among the proposed shapes. The maximum of performance index of 1.14 is found for the HC vortex generator at Re = 4,000. It is also found that the square and forward triangular VGs, have the best thermohydraulic performance among the rectangular and triangular VGs respectively and the highest performance index of 1.13 and 1.11 are reported for these VGs.

The thermohydraulic performance of the PCPF with different vortex generators VGs shapes have been investigated.

The purpose of this paper is to investigate the heat transfer of laminar and turbulent pulsating Al203/water nanofluid flow in a two-dimensional channel. In the laminar flow range, with increasing Reynolds number (Re), the velocity gradient is increased. Also, the Nusselt number (Nu) is increased, which causes increase in the overall heat transfer rate. Additionally, in the change of flow regime from laminar to turbulent, average thermal flux and pulsation range are increased. Also, the effect of different percentage of Al₂O₃/water nanofluid is investigated. The results show that the addition of nanofluids improve thermal performance in channel, but the using of nanofluid causes a pressure drop in the channel.

The pulsatile flow and heat transfer in a two-dimensional channel were investigated.

The numerical results show that the Al₂O₃/Water nanofluid has a significant effect on the thermal properties of the different flows (laminar and turbulent) and the average thermal flux and pulsation ranges are increased in the change of flow regime from laminar to turbulent. Also, the addition of nanofluid improves thermal performance in channels.

The originality of this work lies in proposing a numerical analysis of heat transfer of pulsating Al₂O₃/Water nanofluid flow -with different percentages- in the two-dimensional channel while the flow regime change from laminar to turbulent.