Search results

To improve the thermal performance of base fluid, nanoparticles of three types are dispersed in the base fluid. A novel theory of non-Fourier heat transfer is used for design and development of models. The thermal performance of sample fluids is compared to determine which types of combination of nanoparticles are the best for an optimized enhancement in thermal performance of fluids. This article aims to: (i) investigate the impact of nanoparticles on thermal performance; and (ii) implement the Galerkin finite element method (GFEM) to thermal problems.

The mathematical models are developed using novel non-Fourier heat flux theory, conservation laws of computational fluid dynamics (CFD) and no-slip thermal boundary conditions. The models are approximated using thermal boundary layer approximations, and transformed models are solved numerically using GFEM. A grid-sensitivity test is performed. The accuracy, correction and stability of solutions is ensured. The numerical method adopted for the calculations is validated with published data. Quantities of engineering interest, i.e. wall shear stress, wall mass flow rate and wall heat flux, are calculated and examined versus emerging rheological parameters and thermal relaxation time.

The thermal relaxation time measures the ability of a fluid to restore its original thermal state, called thermal equilibrium and therefore, simulations have shown that the thermal relaxation time associated with a mono nanofluid has the most substantial effect on the temperature of fluid, whereas a ternary nanofluid has the smallest thermal relaxation time. A ternary nanofluid has a wider thermal boundary thickness in comparison with base and di- and mono nanofluids. The wall heat flux (in the case of the ternary nanofluids) has the most significant value compared with the wall shear stresses for the mono and hybrid nanofluids. The wall heat and mass fluxes have the highest values for the case of non-Fourier heat and mass diffusion compared to the case of Fourier heat and mass transfer.

An extensive literature review reveals that no study has considered thermal and concentration memory effects on transport mechanisms in fluids of cross-rheological liquid using novel theory of heat and mass [presented by Cattaneo (Cattaneo, 1958) and Christov (Christov, 2009)] so far. Moreover, the finite element method for coupled and nonlinear CFD problems has not been implemented so far. To the best of the authors’ knowledge for the first time, the dynamics of wall heat flow rate and mass flow rate under simultaneous effects of thermal and solute relaxation times, Ohmic dissipation and first-order chemical reactions are studied.

Cilia serves numerous biological functions in the human body. Malfunctioning of nonmotile or motile cilia will have different kinds of consequences for human health. More specifically, the directed and rhythmic beat of motile cilia facilitates the unidirectional flow of fluids that are crucial in both homeostasis and the development of ciliated tissues. In cilia-dependent hydrodynamic flows, tapering geometries look a lot like the structure of biological pathways and vessels, like airways and lymphatic vessels. In this paper, the Carreau fluid model through the cilia-assisted tapered channel (asymmetric) under the influence of induced magnetic field and convective heat transfer is investigated.

Lubrication theory is a key player in the mathematical formulation of momentum, magnetic field and energy equations. The formulated nonlinear and coupled differential equations are solved with the aid of the homotopy perturbation method (HPM). The graphical results are illustrated with the help of the computational software “Mathematica.”

The impact of diverse emerging physical parameters on velocity, induced magnetic field, pressure rise, current density and temperature profiles is presented graphically. It is observed that the cilia length parameter supported the velocity and current density profiles, while the Hartman number and Weissenberg number were opposed. A promising effect of emerging parameters on streamlines is also perceived.

The study provides novel aspects of cilia-driven induced magnetohydrodynamics flow of Carreau fluid under the influence of induced magnetic field and convective heat transfer through the asymmetric tapered channel.

This study aims to focuse on the flow behavior of a specific nanofluid composed of blood-based iron oxide nanoparticles, combined with motile gyrotactic microorganisms, in a ciliated channel with electroosmosis.

This study applies a powerful mathematical model to examine the combined impacts of bio convection and electrokinetic forces on nanofluid flow. The presence of cilia, which are described as wave-like motions on the channel walls, promotes fluid propulsion, which improves mixing and mass transport. The velocity and dispersion of nanoparticles and microbes are modified by the inclusion of electroosmosis, which is stimulated by an applied electric field. This adds a significant level of complexity.

To ascertain their impact on flow characteristics, important factors such as bio convection Rayleigh number, Grashoff number, Peclet number and Lewis number are varied. The results demonstrate that while the gyrotactic activity of microorganisms contributes to the stability and homogeneity of the nanofluid distribution, electroosmotic forces significantly enhance fluid mixing and nanoparticle dispersion. This thorough study clarifies how to take advantage of electroosmosis and bio convection in ciliated micro channels to optimize nanofluid-based biomedical applications, such as targeted drug administration and improved diagnostic processes.

First paper discussed “Numerical Computation of Cilia Transport of Prandtl Nanofluid (Blood-Fe₃O₄) Enhancing Convective Heat Transfer along Micro Organisms under Electroosmotic effects in Wavy Capillaries”.

This investigation delves into the rationale behind the preferential applicability of the non-Newtonian nanofluid model over alternative frameworks, particularly those incorporating porous medium considerations. The study focuses on analyzing the mass and heat transfer characteristics inherent in the Williamson nanofluid’s non-Newtonian flow over a stretched sheet, accounting for influences such as chemical reactions, viscous dissipation, magnetic field and slip velocity. Emphasis is placed on scenarios where the properties of the Williamson nanofluid, including thermal conductivity and viscosity, exhibit temperature-dependent variations.

Following the use of the OHAM approach, an analytical resolution to the proposed issue is provided. The findings are elucidated through the construction of graphical representations, illustrating the impact of diverse physical parameters on temperature, velocity and concentration profiles.

Remarkably, it is discerned that the magnetic field, viscous dissipation phenomena and slip velocity assumption significantly influence the heat and mass transmission processes. Numerical and theoretical outcomes exhibit a noteworthy level of qualitative concurrence, underscoring the robustness and reliability of the non-Newtonian nanofluid model in capturing the intricacies of the studied phenomena.

Available studies show that no work on the Williamson model is conducted by considering viscous dissipation and the MHD effect past over an exponentially stretched porous sheet. This contribution fills this gap.

This study investigates the coupling effects between temperature, permeability and stress fields during the development of geothermal reservoirs, comparing the impacts of inter-well pressure differentials, reservoir temperature and heat extraction fluid on geothermal extraction.

This study employs theoretical analysis and numerical simulation to explore the coupling mechanisms of temperature, permeability and stress fields in a geothermal reservoir using a thermal-hydrological-mechanical (THM) three-field coupling model.

The results reveal that the pressure differential between wells significantly impacts geothermal extraction capacity, with SC-CO2 achieving 1.83 times the capacity of water. Increasing the aperture of hydraulic and natural fractures effectively enhances geothermal production, with a notable enhancement for natural fractures.

The research provides a critical theoretical foundation for understanding THM coupling mechanisms in geothermal extraction, supporting the optimization of geothermal resource development and utilization.

The main focus is to provide a non-similar solution for the magnetohydrodynamic (MHD) flow of Casson fluid over a curved stretching surface through the novel technique of the artificial intelligence (AI)-based Lavenberg–Marquardt scheme of an artificial neural network (ANN). The effects of joule heating, viscous dissipation and non-linear thermal radiation are discussed in relation to the thermal behavior of Casson fluid.

The non-linear coupled boundary layer equations are transformed into a non-linear dimensionless Partial Differential Equation (PDE) by using a non-similar transformation. The local non-similar technique is utilized to truncate the non-similar dimensionless system up to 2nd order, which is treated as coupled ordinary differential equations (ODEs). The coupled system of ODEs is solved numerically via bvp4c. The data sets are constructed numerically and then implemented by the ANN.

The results indicate that the non-linear radiation parameter increases the fluid temperature. The Casson parameter reduces the fluid velocity as well as the temperature. The mean squared error (MSE), regression plot, error histogram, error analysis of skin friction, and local Nusselt number are presented. Furthermore, the regression values of skin friction and local Nusselt number are obtained as 0.99993 and 0.99997, respectively. The ANN predicted values of skin friction and the local Nusselt number show stability and convergence with high accuracy.

AI-based ANNs have not been applied to non-similar solutions of curved stretching surfaces with Casson fluid model, with viscous dissipation. Moreover, the authors of this study employed Levenberg–Marquardt supervised learning to investigate the non-similar solution of the MHD Casson fluid model over a curved stretching surface with non-linear thermal radiation and joule heating. The governing boundary layer equations are transformed into a non-linear, dimensionless PDE by using a non-similar transformation. The local non-similar technique is utilized to truncate the non-similar dimensionless system up to 2nd order, which is treated as coupled ODEs. The coupled system of ODEs is solved numerically via bvp4c. The data sets are constructed numerically and then implemented by the ANN.

Analyzing and reducing entropy generation is useful for enhancing the thermodynamic performance of engineering systems. This study aims to explore how polymers and nanoparticles in the presence of Lorentz forces influence the fluid behavior and heat transfer characteristics to lessen energy loss and entropy generation.

The dispersion model is initially used to examine the behavior of polymer additives over a magnetized surface. The governing system of partial differential equations (PDEs) is subsequently reduced through the utilization of similarity transformation techniques. Entropy analysis is primarily performed through the implementation of numerical computations on a non-Newtonian polymeric FENE-P model.

The numerical simulations conducted in the presence of Lorentz forces provide significant insights into the consequences of adding polymers to the base fluid. The findings suggest that such an approach minimizes entropy in the flow region. Through the utilization of polymer-MHD (magnetohydrodynamic) interactions, it is feasible to reduce energy loss and improve the efficiency of the system.

This study’s primary motivation and novelty lie in examining the significance of polymer additives as agents that reduce entropy generation on a magnetic surface. The author looks at how nanofluids affect the development of entropy and the loss of irreversibility. To do this, the author uses the Lorentz force, the Soret effect and the Dufour effect to minimize entropy. The findings contribute to fluid mechanics and thermodynamics by providing valuable insights for engineering systems to increase energy efficiency and conserve resources.

Many industries use non-Newtonian ternary hybrid nanofluids (THNF) because of how well they control rheological and heat transport. This being the case, this paper aims to numerically study the Casson-Williamson THNF flow over a yawed cylinder, considering the effects of several slips and an inclined magnetic field. The THNF comprises Al₂O₃-TiO₂-SiO₂ nanoparticles because they improve heat transmission due to large thermal conductivity.

Applying suitable nonsimilarity variables transforms the coupled highly dimensional nonlinear partial differential equations (PDEs) into a system of nondimensional PDEs. To accomplish the goal of achieving the solution, an implicit finite difference approach is used in conjunction with Quasilinearization. With the assistance of a script written in MATLAB, the numerical results and the graphical representation of those solutions were ascertained.

As the Casson parameter β increases, there is an improvement in the velocity profiles in both chord and span orientations, while the gradients Re1/2Cf, Re1/2C¯f reduce for the same variations of β. The velocities of Casson THNF are greater than those of Casson-Williamson THNF. Approximately, a 202% and a 32% ascension are remarked in the magnitudes of Re1/2Cf and Re1/2C¯f for Casson-Williamson THNF than the Casson THNF only. When velocity slip attribute S1 jumps to 1 from 0.5, magnitude of both F(ξ,η) and Re1/2Cf fell down and it is reflected to be 396% at ξ=1, Wi=1 and β=1. An augmentation in thermal jump results in advanced fluid temperature and lower Re−1/2Nu. In particular, about 159% of down drift is detected when S2 taking 1.

There is no existing research on the effects of Casson-Williamson THNF flow over a yawed cylinder with multiple slips and an angled magnetic field, according to the literature.

This study aims to optimize heat transfer efficiency and minimize friction factor and entropy generation in hybrid nanofluid flows through porous media. By incorporating factors such as melting effect, buoyancy, viscous dissipation and no-slip velocity on a stretchable surface, the aim is to enhance overall performance. Additionally, sensitivity analysis using response surface methodology is used to evaluate the influence of key parameters on response functions.

After deriving suitable Lie-group transformations, the modeled equations are solved numerically using the “spectral local linearization method.” This approach is validated through rigorous numerical comparisons and error estimations, demonstrating strong alignment with prior studies.

The findings reveal that higher Darcy numbers and melting parameters are associated with decreased entropy (35.86% and 35.93%, respectively) and shear stress, increased heat transmission (16.4% and 30.41%, respectively) in hybrid nanofluids. Moreover, response surface methodology uses key factors, concerning the Nusselt number and shear stress as response variables in a quadratic model. Notably, the model exhibits exceptional accuracy with $R^2$ values of 99.99% for the Nusselt number and 100.00% for skin friction. Additionally, optimization results demonstrate a notable sensitivity to the key parameters.

Lubrication is a vital method to minimize friction and wear in the automobile sector, contributing significantly to energy efficiency, environmental conservation and carbon reduction. The incorporation of nickel and manganese zinc ferrites into SAE 20 W-40 motor oil lubricants, as defined by the Society of Automotive Engineers, significantly improves their performance, particularly in terms of tribological attributes.

This work stands out for its focus on applications such as hybrid electromagnetic fuel cells and nano-magnetic material processing. While these applications are gaining interest, there is still a research gap regarding the effects of melting on heat transfer in a NiZnFe_2O_4-MnZnFe_2O_4/20W40 motor oil hybrid nanofluid over a stretchable surface, necessitating a thorough investigation that includes both numerical simulations and statistical analysis.

This study investigates the behavior of viscous hybrid ferromagnetic fluids flowing through plain elastic sheets with the magnetic polarization effect. It examines flow in a porous medium using Stefan blowing and utilizes a versatile hybrid ferrofluid containing MnZnFe₂O₄ and Fe₃O₄ nanoparticles in the C2H2F4 base fluid, offering potential real-world applications. The study focuses on steady, laminar and viscous incompressible flow, analyzing heat and mass transfer aspects, including thermal radiation, Brownian motion, thermophoresis and viscous dissipation with convective boundary condition.

The governing expression of the flow model is addressed with pertinent non-dimensional transformations, and the finite element method solves the obtained system of ordinary differential equations.

The variations in fluid velocity, temperature and concentration profiles against all the physical parameters are analyzed through their graphical view. The association of these parameters with local surface friction coefficient, Nusselt number and Sherwood number is examined with the numerical data in a table.

This work extends previous research on ferrofluid flow, investigating unexplored parameters and offering valuable insights with potential engineering, industrial and medical implications. It introduces a novel approach that uses mathematical simplification techniques and the finite element method for the solution.