Search results

The purpose of this paper is to develop a structural relationship model to study the relationship between causes and effects of poor communication and information exchange in construction projects using Smart-PLS.

The first method of this research is to identify the causes and effects factors of poor communication in construction projects from the extant of literature. The data used to develop the model was collected using a questionnaire survey, which targeted construction practitioners in the Malaysian construction industry. A five-point Likert type scale was used to rate the significance of the factors. The factors were classified under their relevant construct/group using exploratory factor analysis. A hypothetical model was developed and then transformed into Smart-PLS in which the hypothetical model suggested that each group of the cause factors has a direct impact on the effect groups. The hypothesis was tested using t-values and p-values. The model was assessed for its inner and outer components and achieved the threshold criterion. Further, the model was verified by engaging 14 construction experts to verify its applicability in the construction project setting.

The study developed a structural equation model to clarify the relationships between causes and effects of poor communication in construction projects. The model explained the degree of relationships among causes and effects of poor communication in construction projects.

The published academic and non-academic literature introduced many studies on the issue of communication including the definitions, importance, barriers to effective communication and means of poor communication. However, these studies ended up only on the general issue of communication lacking an in-depth investigation of the causes and effects of poor communication in the construction industry. The study implemented advanced structural modeling to study the causes and effects. The questionnaire, the data and concluding results fill the identified research gap of this study. The addressed issue is also of interest because communication is considered one of the main knowledge areas in construction management.

This study aims to present the overview of intellectual capital creation micro-mechanisms concerning formal and informal knowledge processes. The organizational culture, transformational leadership and innovativeness are also included in the investigation as ascendants and consequences of the focal relation of intellectual capital and knowledge processes.

Based on a sample of 1,418 Polish knowledge workers from the construction, healthcare, higher education and information technology (IT) industries, the empirical model was developed using the structural equation modeling (SEM) method.

The study exposes that the essence of transformational leadership innovativeness oriented is developing all intellectual capital components. To do so, leaders must support both formal and informal knowledge processes through the organizational culture of knowledge and learning. Furthermore, for best results of the knowledge transformation into intellectual capital, the learning culture must be shaped by both components: learning climate and acceptance of mistakes.

Presented findings can be directly applied to organizations to enhance innovativeness. Namely, leaders who observe that the more knowledge is formally managed in their organizations, the less effective the knowledge exchange is-should put more effort into supporting informal knowledge processes to smoothly develop human and relational intellectual capital components. Shortly, leaders must implement an authentic learning culture, including the mistakes acceptance component, to use the full organizational potential to achieve intellectual capital growth. Intellectual capital growth is essential for innovativeness.

This study presents the “big picture” of all intellectual capital creation micro-mechanisms linking transformational leadership with organizational innovativeness and explains the “knowledge paradox” identified by Mabey and Zhao (2017). This explanation assumes that intellectual capital components are created informally (i.e. human and relational ones) and formally (i.e. structural ones). Therefore, for best effects, both formal and informal knowledge processes, must be supported. Furthermore, this study exposes that the intensity of all explored micro-mechanisms is industry-specific.

This paper aims to examine how a partnering contract facilitates project values and the culture in a construction project and the consequences of said facilitation. Hence, it answers the following research questions: 1) How does the contractual framework in Bispevika facilitate relational culture? 2) What effects of this facilitation can be identified in the early phase of development?

An explorative approach is taken into a single case. A literature study into the topics of relational contracting and culture provides a backdrop for the study. The empirical work consists of a study of the construction contracts and six in-depth interviews with actors from the supply-chain.

Contractual elements affect the project organizations’ motivation. On the basis of existing literature, five contractual elements are identified explicitly in the contracts: “shared goals”, “incentives and bonus”, “open book”, “colocation”, and “design-build”.

The data collection is restricted to a single point in time in a single project. Further research is necessary both at a later stage in the same case and in similar projects.

The paper identifies the effects that proper use of contractual elements has on the relational culture in a construction project and is, therefore, important for subsequent research within the area.

In addition to identifying the existing contractual elements, the interviews also revealed two additional practices that might be useful for subsequent research: “involvement of executive management” and “subsequent contracts dependent on previous project performance”.

Statistics show that the construction sector has the second-highest number of accident cases in Malaysia. A total of 100, 000 construction workers suffer from work-related bad health each year. Scaffolding accidents are the second cause of accidents on construction sites. Therefore, this present research provided answers to the following questions: (1) what are the causes of scaffolding accidents and (2) what are the possible measures to reduce scaffolding accidents?

The research developed a questionnaire instrument that included 24 causes of scaffolding accidents and 21 remedial actions. The research was based on a cross-sectional survey questionnaire administered to 129 members of construction organizations.

Data revealed that scaffolding-related cases caused a total of 70% of the deaths/injuries on sites. Furthermore, scaffolding accidents were mainly caused by a lack of guard rails on scaffoldings, poor inspections, improper assembly, a poor safety culture, poor attitudes towards safety, poor footing of scaffoldings and unsecured planking. To reduce scaffolding accidents, there must be a lifeline on scaffolding, proper guardrails and proper assembling of scaffoldings, and preventing access to incomplete or defective scaffoldings. The 24 causes are structured into six factors through factor analysis and the 21 remedial actions into six factors.

This research serves as the first attempt to conduct broad research on the causes and remedial actions concerning scaffolding accidents on construction sites in Malaysia. Theoretically, the research has provided fresh insights into the impact of scaffolding accidents.

Acknowledging, on the one hand, the increasing fragility of supply chains and the number of risks involved in supply chain operations and, on the other hand, the role of small- and medium-sized enterprises (SMEs) in supply chains and the high exposure of these firms to risks of different types, this study aims to examine the relationship between supply chain risk management (SCRM) and innovation performance in SMEs. Furthermore, the impact of technological turbulence on this relationship was studied to take into account recent technological changes.

Structural equation modelling was carried out on a sample of Turkish SMEs to test the hypotheses developed.

The findings presented allow the authors to better understand the link between SCRM and innovation performance in SMEs. More precisely, empirical evidence is provided about the impact of SCRM components such as maturity and ability on innovation performance. Furthermore, the findings show the impact of technological turbulence on both SCRM and innovation performance.

By focusing on SCRM in SMEs, this paper contributes to the body of knowledge with regard to SCRM in general and with regard to SMEs in particular; research on the latter has only started recently. Moreover, by having studied SMEs from a developing country (other than China), this paper helps to develop a broader and more diverse perspective of SCRM.

The purpose of this paper is to investigate two current transformation processes in the construction industry: the adoption of a novel material, cross-laminated timber (CLT), and the enhancement of digital transformation. This paper depicts the actors and interaction in the business network that is emerging around CLT construction and, in particular, how digital transformation (that is, the deployment of Construction 4.0 solutions) occurs in this business network.

Digital transformation is a relatively new phenomenon in CLT construction, and the authors, therefore, adopt a qualitative inductive research approach and rely on semi-structured interviews.

The findings of this paper suggest that it is critical for actors to adopt an interorganizational perspective in CLT construction, instead of only focusing on internal operations. An interorganizational perspective supports successful CLT construction, as well as the deployment of Construction 4.0 solutions. This will bring about the benefits of digital transformation in the construction industry.

This paper investigates the network created around CLT construction in Finland but more generally illustrates the change toward Construction 4.0 solutions.

For managers, this paper explicates the importance of networking, instead of focusing on the internal development of the company, when adopting novel solutions emerging from both construction and information technology-related advancements.

Stability and traditions are characteristic of the construction industry. New technical solutions and materials, together with calls for sustainability, have challenged the traditional ways of constructing, and for example, the development of CLT construction has led to an emergence of new business networks. This material-related process and the ongoing digital transformation of business form an interesting context for an empirical-based analysis of changing interaction and networks. This paper gives the first insights into how digital transformation can benefit the evolution of the network.

Despite the contributions of both the oil and gas and construction industries to the gross domestic product (GDP) of the country, both industries are still marred by incessant accidents. Therefore, the aim of this study is to compare the health and safety practises of the construction and oil and gas industries in Nigeria in order to suggest the best approach to health and safety practices.

A survey questionnaire was developed and administered to professionals working in the construction and oil and gas industries. Data were analysed using the relative importance index (RII). An independent sample t-test was also conducted to determine whether there was a significant difference in the construction and oil and gas industries.

The study revealed that the rate at which health and safety are practised in the oil and gas industry is comparatively high compared to how they are practised in the construction industry. Proper site layout and planning, provision of a safe working environment, proper health and safety risk assessment were more predominantly practised in the oil and gas industry, while proper site layout and planning, disallowing unauthorised entry into site and the provision of a safe working environment were predominantly practised in the construction industry.

This study is the first to compare the health and safety practises of the construction and oil and gas industries in Nigeria. This study was significant because it would provide insight into construction and oil and gas managers, as well as other decision-makers in both industries, on how to improve health and safety practices.

The purpose of this study is to describe latent classes explaining the innovation logic in the Finnish construction companies. Innovativeness is a driver of competitive performance and vital to the long-term success of any organisation and company.

Using finite mixture structural equation modelling (FMSEM), the authors have classified innovation logic into latent classes. The method analyses and recognises classes for companies that have similar logic in innovation activities based on the collected data.

Through FMSEM analysis, the authors have identified three latent classes that explain the innovation logic in the Finnish construction companies – LC1: the internal innovators; LC2: the non-innovation-oriented introverts; and LC3: the innovation-oriented extroverts. These three latent classes clearly capture the perceptions within the industry as well as the different characteristics and variables.

The presented latent classes explain innovation logic but is limited to analysing Finnish companies. Also, the research is quantitative by nature and does not increase the understanding in the same manner as qualitative research might capture on more specific aspects.

This paper presents starting points for construction industry companies to intensify innovation activities. It may also indicate more fundamental changes for the structure of construction industry organisations, especially by enabling innovation friendly culture.

This study describes innovation logic in Finnish construction companies through three models (LC1–LC3) by using quantitative data analysed with the FMSEM method. The fundamental innovation challenges in the Finnish construction companies are clarified via the identified latent classes.

Multicultural leadership education may be enhanced through the use of social construction literature as a theoretical frame. Here, I present a brief overview of social construction theory and demonstrate how its tenets overlap with the goal of encouraging students’ intercultural competence. I then provide two classroom activities that illustrate how I have used social construction to explain and examine interaction across diverse groups, as well as student feedback regarding the activities’ efficacy.